Thomas Thurn-Albrecht

Bio: Thomas Thurn-Albrecht is an academic researcher from University of Massachusetts Amherst. The author has contributed to research in topics: Materials science & Crystallization. The author has an hindex of 9, co-authored 11 publications receiving 5332 citations.

Ultrahigh-Density Nanowire Arrays Grown in Self-Assembled Diblock Copolymer Templates

Abstract: We show a simple, robust, chemical route to the fabrication of ultrahigh-density arrays of nanopores with high aspect ratios using the equilibrium self-assembled morphology of asymmetric diblock copolymers. The dimensions and lateral density of the array are determined by segmental interactions and the copolymer molecular weight. Through direct current electrodeposition, we fabricated vertical arrays of nanowires with densities in excess of 1.9 x 10(11) wires per square centimeter. We found markedly enhanced coercivities with ferromagnetic cobalt nanowires that point toward a route to ultrahigh-density storage media. The copolymer approach described is practical, parallel, compatible with current lithographic processes, and amenable to multilayered device fabrication.

Self-assembly of nanoparticles into structured spherical and network aggregates

Abstract: Multi-scale ordering of materials is central for the application of molecular systems in macroscopic devices. Self-assembly based on selective control of non-covalent interactions provides a powerful tool for the creation of structured systems at a molecular level, and application of this methodology to macromolecular systems provides a means for extending such structures to macroscopic length scale. Monolayer-functionalized nanoparticles can be made with a wide variety of metallic and non-metallic cores, providing a versatile building block for such approaches. Here we present a polymer-mediated 'bricks and mortar' strategy for the ordering of nanoparticles into structured assemblies. This methodology allows monolayer-protected gold particles to self-assemble into structured aggregates while thermally controlling their size and morphology. Using 2-nm gold particles as building blocks, we show that spherical aggregates of size 97 +/- 17 nm can be produced at 23 degrees C, and that 0.5-1 microm spherical assemblies with (5-40) x 10(5) individual subunits form at -20 degrees C. Intriguingly, extended networks of approximately 50-nm subunits are formed at 10 degrees C, illustrating the potential of our approach for the formation of diverse structural motifs such as wires and rods. These findings demonstrate that the assembly process provides control over the resulting aggregates, while the modularity of the 'bricks and mortar' approach allows combinatorial control over the constituents, providing a versatile route to new materials systems.

Electrically induced structure formation and pattern transfer

Abstract: The wavelength of light represents a fundamental technological barrier to the production of increasingly smaller features on integrated circuits. New technologies that allow the replication of patterns on scales less than 100 nm need to be developed if increases in computing power are to continue at the present rate. Here we report a simple electrostatic technique that creates and replicates lateral structures in polymer films on a submicrometre length scale. Our method is based on the fact that dielectric media experience a force in an electric field gradient. Strong field gradients can produce forces that overcome the surface tension in thin liquid films, inducing an instability that features a characteristic hexagonal order. In our experiments, pattern formation takes place in polymer films at elevated temperatures, and is fixed by cooling the sample to room temperature. The application of a laterally varying electric field causes the instability to be focused in the direction of the highest electric field. This results in the replication of a topographically structured electrode. We report patterns with lateral dimensions of 140 nm, but the extension of the technique to pattern replication on scales smaller than 100 nm seems feasible.

Nanoscopic Templates from Oriented Block Copolymer Films

Abstract: cylindrical microdomains, an orientation normal to the substrate surface is desirable. Two different approaches are used to this end. In thin films, random copolymers anchored to a substrate can be used to produce a neutral surface. [5] For entropic reasons, the microdomains orient normal to the substrate surface. [6] In a second approach, electric fields were used to orient the cylindrical microdomains parallel to the field lines. [7‐10] The approach relies on the orientation-dependent polarization energy induced when an anisotropic body is placed in an electric field. An anisotropic microphase structure will orient such that the interfaces between the two blocks are aligned parallel to the electric field. In this article it is shown that cylindrical microdomains of a copolymer film can be used to generate an array of ordered nanoscopic pores with well-controlled size, orientation, and structure. To this end, selective etching procedures and a characterization of the samples by quantitative analysis of the X-ray scattering along with electron (EM) and atomic force microscopies (AFM) are described. The processes outlined are shown to be operative over a very large range in sample thickness ranging from 40 nm up to several micrometers. The resulting nanoporous films are promising candidates as membranes with specific transport properties and as templates for electronic and magnetic nanostructured materials. Figures 1A and 1B show AFM images obtained from a

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

Preparation and Growth Mechanism of Gold Nanorods (NRs) Using Seed-Mediated Growth Method

Abstract: A method is used for preparing gold NRs with aspect ratios ranging from 1.5 to 10 for which the surface plasmon absorption maxima are between 600 and 1300 nm. This method has been adapted from a previously published seed-mediated growth method (Jana et al. Adv. Mater. 2001, 13, 1389). The disadvantages and limitations of the earlier method (i.e., formation of noncylindrical NRs, φ-shaped particles, and formation of a large fraction of spherical particles) have been overcome by use of a hexadecyltrimethylammonium bromide (CTAB)-capped seed instead of a citrate-capped one. In a single-component surfactant system, the silver content of the growth solution was used to grow NRs to a desired length. This results in reproducible formation of NRs with aspect ratios ranging from 1.5 to 4.5. To grow longer NRs with aspect ratios ranging from 4.6 to 10, a binary surfactant mixture composed of benzyldimethylhexadecylammoniumchloride (BDAC) and CTAB was used. NRs are grown in this mixture either by aging or by additio...

Gold nanoparticles in chemical and biological sensing.

Abstract: Detection of chemical and biological agents plays a fundamental role in biomedical, forensic and environmental sciences1–4 as well as in anti bioterrorism applications.5–7 The development of highly sensitive, cost effective, miniature sensors is therefore in high demand which requires advanced technology coupled with fundamental knowledge in chemistry, biology and material sciences.8–13 In general, sensors feature two functional components: a recognition element to provide selective/specific binding with the target analytes and a transducer component for signaling the binding event. An efficient sensor relies heavily on these two essential components for the recognition process in terms of response time, signal to noise (S/N) ratio, selectivity and limits of detection (LOD).14,15 Therefore, designing sensors with higher efficacy depends on the development of novel materials to improve both the recognition and transduction processes. Nanomaterials feature unique physicochemical properties that can be of great utility in creating new recognition and transduction processes for chemical and biological sensors15–27 as well as improving the S/N ratio by miniaturization of the sensor elements.28 Gold nanoparticles (AuNPs) possess distinct physical and chemical attributes that make them excellent scaffolds for the fabrication of novel chemical and biological sensors (Figure 1).29–36 First, AuNPs can be synthesized in a straightforward manner and can be made highly stable. Second, they possess unique optoelectronic properties. Third, they provide high surface-to-volume ratio with excellent biocompatibility using appropriate ligands.30 Fourth, these properties of AuNPs can be readily tuned varying their size, shape and the surrounding chemical environment. For example, the binding event between recognition element and the analyte can alter physicochemical properties of transducer AuNPs, such as plasmon resonance absorption, conductivity, redox behavior, etc. that in turn can generate a detectable response signal. Finally, AuNPs offer a suitable platform for multi-functionalization with a wide range of organic or biological ligands for the selective binding and detection of small molecules and biological targets.30–32,36 Each of these attributes of AuNPs has allowed researchers to develop novel sensing strategies with improved sensitivity, stability and selectivity. In the last decade of research, the advent of AuNP as a sensory element provided us a broad spectrum of innovative approaches for the detection of metal ions, small molecules, proteins, nucleic acids, malignant cells, etc. in a rapid and efficient manner.37 Figure 1 Physical properties of AuNPs and schematic illustration of an AuNP-based detection system. In this current review, we have highlighted the several synthetic routes and properties of AuNPs that make them excellent probes for different sensing strategies. Furthermore, we will discuss various sensing strategies and major advances in the last two decades of research utilizing AuNPs in the detection of variety of target analytes including metal ions, organic molecules, proteins, nucleic acids, and microorganisms.

High-Resolution Inkjet Printing of All-Polymer Transistor Circuits

Abstract: Direct printing of functional electronic materials may provide a new route to low-cost fabrication of integrated circuits. However, to be useful it must allow continuous manufacturing of all circuit components by successive solution deposition and printing steps in the same environment. We demonstrate direct inkjet printing of complete transistor circuits, including via-hole interconnections based on solution-processed polymer conductors, insulators, and self-organizing semiconductors. We show that the use of substrate surface energy patterning to direct the flow of water-based conducting polymer inkjet droplets enables high-resolution definition of practical channel lengths of 5 micrometers. High mobilities of 0.02 square centimeters per volt second and on-off current switching ratios of 10 5 were achieved.