Ting Ting Zuo

Bio: Ting Ting Zuo is an academic researcher from University of Science and Technology Beijing. The author has contributed to research in topics: Materials science & Electrical resistivity and conductivity. The author has an hindex of 1, co-authored 1 publications receiving 2975 citations.

Achieving High Strength and High Conductivity of Cu-6 wt%Ag Sheets by Controlling the Aging Cooling Rate

Abstract: In this paper, Cu-6 wt%Ag alloy sheets were prepared using vacuum induction melting, heat treatment, and cold working rolling. We investigated the influence of the aging cooling rate on the microstructure and properties of Cu-6 wt%Ag alloy sheets. By reducing the cooling rate of the aging treatment, the mechanical properties of the cold-rolled Cu-6 wt%Ag alloy sheets were improved. The cold-rolled Cu-6 wt%Ag alloy sheet achieves a tensile strength of 1003 MPa and an electrical conductivity of 75% IACS (International Annealing Copper Standard), which is superior to the alloy fabricated with other methods. SEM characterization shows that the change in properties of the Cu-6 wt%Ag alloy sheets with the same deformation is due to a precipitation of the nano-Ag phase. The high-performance Cu-Ag sheets are expected to be used as Bitter disks for water-cooled high-field magnets.

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off

Abstract: Metals have been mankind's most essential materials for thousands of years; however, their use is affected by ecological and economical concerns Alloys with higher strength and ductility could alleviate some of these concerns by reducing weight and improving energy efficiency However, most metallurgical mechanisms for increasing strength lead to ductility loss, an effect referred to as the strength-ductility trade-off Here we present a metastability-engineering strategy in which we design nanostructured, bulk high-entropy alloys with multiple compositionally equivalent high-entropy phases High-entropy alloys were originally proposed to benefit from phase stabilization through entropy maximization Yet here, motivated by recent work that relaxes the strict restrictions on high-entropy alloy compositions by demonstrating the weakness of this connection, the concept is overturned We decrease phase stability to achieve two key benefits: interface hardening due to a dual-phase microstructure (resulting from reduced thermal stability of the high-temperature phase); and transformation-induced hardening (resulting from the reduced mechanical stability of the room-temperature phase) This combines the best of two worlds: extensive hardening due to the decreased phase stability known from advanced steels and massive solid-solution strengthening of high-entropy alloys In our transformation-induced plasticity-assisted, dual-phase high-entropy alloy (TRIP-DP-HEA), these two contributions lead respectively to enhanced trans-grain and inter-grain slip resistance, and hence, increased strength Moreover, the increased strain hardening capacity that is enabled by dislocation hardening of the stable phase and transformation-induced hardening of the metastable phase produces increased ductility This combined increase in strength and ductility distinguishes the TRIP-DP-HEA alloy from other recently developed structural materials This metastability-engineering strategy should thus usefully guide design in the near-infinite compositional space of high-entropy alloys

High-entropy alloys

Abstract: Alloying has long been used to confer desirable properties to materials. Typically, it involves the addition of relatively small amounts of secondary elements to a primary element. For the past decade and a half, however, a new alloying strategy that involves the combination of multiple principal elements in high concentrations to create new materials called high-entropy alloys has been in vogue. The multi-dimensional compositional space that can be tackled with this approach is practically limitless, and only tiny regions have been investigated so far. Nevertheless, a few high-entropy alloys have already been shown to possess exceptional properties, exceeding those of conventional alloys, and other outstanding high-entropy alloys are likely to be discovered in the future. Here, we review recent progress in understanding the salient features of high-entropy alloys. Model alloys whose behaviour has been carefully investigated are highlighted and their fundamental properties and underlying elementary mechanisms discussed. We also address the vast compositional space that remains to be explored and outline fruitful ways to identify regions within this space where high-entropy alloys with potentially interesting properties may be lurking. High-entropy alloys have greatly expanded the compositional space for alloy design. In this Review, the authors discuss model high-entropy alloys with interesting properties, the physical mechanisms responsible for their behaviour and fruitful ways to probe and discover new materials in the vast compositional space that remains to be explored.

Advanced Thermoelectric Design: From Materials and Structures to Devices

Abstract: The long-standing popularity of thermoelectric materials has contributed to the creation of various thermoelectric devices and stimulated the development of strategies to improve their thermoelectric performance. In this review, we aim to comprehensively summarize the state-of-the-art strategies for the realization of high-performance thermoelectric materials and devices by establishing the links between synthesis, structural characteristics, properties, underlying chemistry and physics, including structural design (point defects, dislocations, interfaces, inclusions, and pores), multidimensional design (quantum dots/wires, nanoparticles, nanowires, nano- or microbelts, few-layered nanosheets, nano- or microplates, thin films, single crystals, and polycrystalline bulks), and advanced device design (thermoelectric modules, miniature generators and coolers, and flexible thermoelectric generators). The outline of each strategy starts with a concise presentation of their fundamentals and carefully selected examples. In the end, we point out the controversies, challenges, and outlooks toward the future development of thermoelectric materials and devices. Overall, this review will serve to help materials scientists, chemists, and physicists, particularly students and young researchers, in selecting suitable strategies for the improvement of thermoelectrics and potentially other relevant energy conversion technologies.