1.1 Introduction to Pd-catalyzed directed C–H functionalization
The development of methods for the direct conversion of carbon–hydrogen bonds into carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon bonds remains a critical challenge in organic chemistry. Mild and selective transformations of this type will undoubtedly find widespread application across the chemical field, including in the synthesis of pharmaceuticals, natural products, agrochemicals, polymers, and feedstock commodity chemicals. Traditional approaches for the formation of such functional groups rely on pre-functionalized starting materials for both reactivity and selectivity. However, the requirement for installing a functional group prior to the desired C–O, C–X, C–N, C–S, or C–C bond adds costly chemical steps to the overall construction of a molecule. As such, circumventing this issue will not only improve atom economy but also increase the overall efficiency of multi-step synthetic sequences.

Direct C–H bond functionalization reactions are limited by two fundamental challenges: (i) the inert nature of most carbon-hydrogen bonds and (ii) the requirement to control site selectivity in molecules that contain diverse C–H groups. A multitude of studies have addressed the first challenge by demonstrating that transition metals can react with C–H bonds to produce C–M bonds in a process known as “C–H activation”.1 The resulting C–M bonds are far more reactive than their C–H counterparts, and in many cases they can be converted to new functional groups under mild conditions.

The second major challenge is achieving selective functionalization of a single C–H bond within a complex molecule. While several different strategies have been employed to address this issue, the most common (and the subject of the current review) involves the use of substrates that contain coordinating ligands. These ligands (often termed “directing groups”) bind to the metal center and selectively deliver the catalyst to a proximal C–H bond. Many different transition metals, including Ru, Rh, Pt, and Pd, undergo stoichiometric ligand-directed C–H activation reactions (also known as cyclometalation).2,3 Furthermore, over the past 15 years, a variety of catalytic carbon-carbon bond-forming processes have been developed that involve cyclometalation as a key step.1b–d,4

The current review will focus specifically on ligand-directed C–H functionalization reactions catalyzed by palladium. Palladium complexes are particularly attractive catalysts for such transformations for several reasons. First, ligand-directed C–H functionalization at Pd centers can be used to install many different types of bonds, including carbon-oxygen, carbon-halogen, carbon-nitrogen, carbon-sulfur, and carbon-carbon linkages. Few other catalysts allow such diverse bond constructions,5,6,7 and this versatility is predominantly the result of two key features: (i) the compatibility of many PdII catalysts with oxidants and (ii) the ability to selectively functionalize cyclopalladated intermediates. Second, palladium participates in cyclometalation with a wide variety of directing groups, and, unlike many other transition metals, promotes C–H activation at both sp2 and sp3 C–H sites. Finally, the vast majority of Pd-catalyzed directed C–H functionalization reactions can be performed in the presence of ambient air and moisture, making them exceptionally practical for applications in organic synthesis.

While several accounts have described recent advances, this is the first comprehensive review encompassing the large body of work in this field over the past 5 years (2004–2009). Both synthetic applications and mechanistic aspects of these transformations are discussed where appropriate, and the review is organized on the basis of the type of bond being formed.

/pdf/palladium-catalyzed-ligand-directed-c-h-functionalization-4pc4c7r0ac.pdf

Palladium-Catalyzed Ligand-Directed C−H Functionalization Reactions

Introduced to the Market in the Last Decade (2001−2011) Jiang Wang,† María Sańchez-Rosello,́‡,§ Jose ́ Luis Aceña, Carlos del Pozo,‡ Alexander E. Sorochinsky, Santos Fustero,*,‡,§ Vadim A. Soloshonok,* and Hong Liu*,† †Key Laboratory of Receptor Research, Shanghai Institute of Materia Medica, Chinese Academy of Sciences, 555 Zu Chong Zhi Road, Shanghai 201203, China ‡Department of Organic Chemistry, Faculty of Pharmacy, University of Valencia, Av. Vicente Andreś Estelleś, 46100 Burjassot, Valencia, Spain Laboratorio de Molećulas Orgańicas, Centro de Investigacioń Príncipe Felipe, C/ Eduardo Primo Yuf́era 3, 46012 Valencia, Spain Department of Organic Chemistry I, Faculty of Chemistry, University of the Basque Country UPV/EHU, Paseo Manuel Lardizab́al 3, 20018 San Sebastian, Spain IKERBASQUE, Basque Foundation for Science, Alameda Urquijo, 36-5 Plaza Bizkaia, 48011 Bilbao, Spain Institute of Bioorganic Chemistry and Petrochemistry, National Academy of Sciences of Ukraine, Murmanska Street 1, 02660 Kyiv-94, Ukraine

Fluorine in pharmaceutical industry: fluorine-containing drugs introduced to the market in the last decade (2001-2011).

Catalytic dehydrogenative cross-coupling: forming carbon-carbon bonds by oxidizing two carbon-hydrogen bonds

The site-selective formation of carbon-carbon bonds through direct functionalizations of otherwise unreactive carbon-hydrogen bonds constitutes an economically attractive strategy for an overall streamlining of sustainable syntheses. In recent decades, intensive research efforts have led to the development of various reaction conditions for challenging C-H bond functionalizations, among which transition-metal-catalyzed transformations arguably constitute thus far the most valuable tool. For instance, the use of inter alia palladium, ruthenium, rhodium, copper, or iron complexes set the stage for chemo-, site-, diastereo-, and/or enantioselective C-H bond functionalizations. Key to success was generally a detailed mechanistic understanding of the elementary C-H bond metalation step, which depending on the nature of the metal fragment can proceed via several distinct reaction pathways. Traditionally, three different modes of action were primarily considered for CH bond metalations, namely, (i) oxidative addition with electronrich late transition metals, (ii) σ-bond metathesis with early transition metals, and (iii) electrophilic activation with electrondeficient late transition metals (Scheme 1). However, more recent mechanistic studies indicated the existence of a continuum of electrophilic, ambiphilic, and nucleophilic interactions. Within this continuum, detailed experimental and computational analysis provided strong evidence for novel C-H bond metalationmechanisms relying on the assistance of a bifunctional ligand bearing an additional Lewis-basic heteroatom, such as that found in (heteroatom-substituted) secondary phosphine oxides or most prominently carboxylates (Scheme 1, iv). This novel insight into the nature of stoichiometric metalations has served as stimulus for the development of novel transformations based on cocatalytic amounts of carboxylates, which significantly broadened the scope of C-H bond functionalizations in recent years, with most remarkable progress being made in palladiumor ruthenium-catalyzed direct arylations and direct alkylations. These carboxylate-assisted C-H bond transformations were mostly proposed to proceed via a mechanism in which metalation takes place via a concerted base-assisted deprotonation. To mechanistically differentiate these intramolecular metalations new acronyms have recently been introduced into the literature, such as CMD (concerted metalationdeprotonation), IES (internal electrophilic substitution), or AMLA (ambiphilic metal ligand activation), which describe related mechanisms and will be used below where appropriate. This review summarizes the development and scope of carboxylates as cocatalysts in transition-metal-catalyzed C-H functionalizations until autumn 2010. Moreover, experimental and computational studies on stoichiometric metalation reactions being of relevance to the mechanism of these catalytic processes are discussed as well. Mechanistically related C-H bond cleavage reactions with ruthenium or iridium complexes bearing monodentate ligands are, however, only covered with respect to their working mode, and transformations with stoichiometric amounts of simple acetate bases are solely included when their mechanism was suggested to proceed by acetate-assisted metalation.

Carboxylate-assisted transition-metal-catalyzed C-H bond functionalizations: mechanism and scope.

Fluorine is the most electronegative element in the periodic table. When bound to carbon it forms the strongest bonds in organic chemistry and this makes fluorine substitution attractive for the development of pharmaceuticals and a wide range of speciality materials. Although highly polarised, the C–F bond gains stability from the resultant electrostatic attraction between the polarised Cδ+ and Fδ– atoms. This polarity suppresses lone pair donation from fluorine and in general fluorine is a weak coordinator. However, the C–F bond has interesting properties which can be understood either in terms of electrostatic/dipole interactions or by considering stereoelectronic interactions with neighbouring bonds or lone pairs. In this tutorial review these fundamental aspects of the C–F bond are explored to rationalise the geometry, conformation and reactivity of individual organofluorine compounds.

Understanding organofluorine chemistry. An introduction to the C–F bond

Over the past decade, the most significant, conceptual advances in the field of fluorination were enabled most prominently by organo- and transition-metal catalysis. The most challenging transformation remains the formation of the parent C-F bond, primarily as a consequence of the high hydration energy of fluoride, strong metal-fluorine bonds, and highly polarized bonds to fluorine. Most fluorination reactions still lack generality, predictability, and cost-efficiency. Despite all current limitations, modern fluorination methods have made fluorinated molecules more readily available than ever before and have begun to have an impact on research areas that do not require large amounts of material, such as drug discovery and positron emission tomography. This Review gives a brief summary of conventional fluorination reactions, including those reactions that introduce fluorinated functional groups, and focuses on modern developments in the field.

/pdf/introduction-of-fluorine-and-fluorine-containing-functional-1i8kwiad20.pdf

Introduction of Fluorine and Fluorine-Containing Functional Groups

Recent advances in catalysis have made the incorporation of fluorine into complex organic molecules easier than ever before, but selective, general and practical fluorination reactions remain sought after. Fluorination of molecules often imparts desirable properties, such as metabolic and thermal stability, and fluorinated molecules are therefore frequently used as pharmaceuticals or materials. But the formation of carbon-fluorine bonds in complex molecules is a significant challenge. Here we discuss reactions to make organofluorides that have emerged within the past few years and which exemplify how to overcome some of the intricate challenges associated with fluorination.

/pdf/catalysis-for-fluorination-and-trifluoromethylation-4ahg2wnf74.pdf

Catalysis for fluorination and trifluoromethylation

Modern carbon-fluorine bond forming reactions for aryl fluoride synthesis.

Palladium is a common transition metal for catalysis, and the fundamental organometallic reactivity of palladium in its 0, I, II and IV oxidation states is well established. The potential role of Pd(III) in catalysis has not been investigated because organometallic reactions that involve Pd(III) have not been reported previously. In this article we present the formation of carbon–heteroatom bonds from discrete bimetallic Pd(III) complexes and show the synergistic involvement of two palladium atoms of the bimetallic core during both oxidation and reductive elimination. Our results challenge the currently accepted mechanism for oxidative palladium catalysis via Pd(II)–Pd(IV) redox cycles and implicate bimetallic palladium complexes in redox catalysis. The new mechanistic insight provides an opportunity to explore rationally the potential of bimetallic palladium catalysis for synthesis.

Bimetallic Pd(III) complexes in palladium-catalysed carbon–heteroatom bond formation.

Die wichtigsten konzeptionellen Fortschritt auf dem Gebiet der Fluorierungen der letzten zehn Jahre wurden durch die Organo- und Ubergangsmetallkatalyse ermoglicht. Die schwierigste Umwandlung ist weiterhin die Bildung der C-F-Stammbindung, was in erster Linie eine Folge der hohen Hydratationsenergie von Fluorid, starker Metall-Fluor-Bindungen und der hoch polarisierten Bindungen zu Fluor ist. Den meisten Fluorierungen fehlt es immer noch an Allgemeingultigkeit, Vorhersagbarkeit und Kosteneffizienz. Trotz der Einschrankungen sind fluorierte Verbindungen mit modernen Fluorierungsmethoden leichter zuganglich als je zuvor. Vor allem beginnen sich die modernen Methoden auf Forschungsgebiete auszuwirken, die keine grosen Materialmengen benotigen, z. B. die Wirkstoffentwicklung und die Positronenemissionstomographie. Diese Entwicklungen werden in diesem Aufsatz zusammengefasst und vor dem Hintergrund konventioneller Fluorierungsmethoden diskutiert.

Tobias Ritter

Papers

Introduction of Fluorine and Fluorine-Containing Functional Groups

Catalysis for fluorination and trifluoromethylation

Modern carbon-fluorine bond forming reactions for aryl fluoride synthesis.

Bimetallic Pd(III) complexes in palladium-catalysed carbon–heteroatom bond formation.

Einführung von Fluor und fluorhaltigen funktionellen Gruppen