Tom Verleyen

Bio: Tom Verleyen is an academic researcher from Ghent University. The author has contributed to research in topics: Vegetable oil & Soybean oil. The author has an hindex of 13, co-authored 24 publications receiving 833 citations.

Analysis of free and esterified sterols in vegetable oils

Abstract: In vegetable oils, phytosterols occur as free sterols or as steryl esters. Few analytical methods report the quantification of esterified and free sterols in vegetable oils. In this study, esterified and free sterols were separated by silica gel column chromatography upon elution with n-hexane/ethyl acetate (90∶10 vol/vol) followed by n-hexane/diethyl ether/ethanol (25∶25∶50 by vol). Both fractions were saponified separately and the phytosterol content was quantified by GC. The analytical method for the analysis of esterified and free sterols had a relative standard deviation of 1.16% and an accuracy of 93.6–94.1%, which was comparable to the reference method for the total sterol analysis. A large variation in the content and distribution of the sterol fraction between different vegetable oils can be observed. Corn and rapeseed oils were very rich in phytosterols, which mainly occurred as steryl esters (56–60%), whereas the majority of the other vegetable oils (soybean, sunflower, palm oil, etc.) contained a much lower esterified sterol content (25–40%). No difference in the relative proportion of the individual sterols among crude and refined vegetable oils was observed.

Influence of the Vegetable Oil Refining Process on Free and Esterified Sterols

Abstract: The influence of the refining process on the distribution of free and esterified phytosterols in corn, palm, and soybean oil was studied. Water degumming did not affect the phytosterol content or its composition. A slight increase in the content of free sterols was observed during acid degumming and bleaching due to acid-catalyzed hydrolysis of steryl esters. A significant reduction in the content of total sterols during neutralization was observed, which was attributed to a reduction in the free sterol fraction. Free sterols probably form micelles with soaps and are transferred into the soapstock. The steryl ester content remained constant during all neutralization experiments, indicating that hydrolysis of steryl esters did not take place during neutralization. During deodorization, free sterols are distilled from the oil, resulting in a gradual reduction in the total sterol content as a function of the deodorization temperature (220–260°C). A considerable increase in the steryl ester fraction was found during physical refining, probably owing to a heat-promoted esterification reaction between free sterols and FA.

Modeling of α-tocopherol loss and oxidation products formed during thermoxidation in triolein and tripalmitin mixtures

Abstract: The degradation of alpha-tocopherol and the formation of alpha-tocopherol and triacylglycerol oxidation products at high temperatures (150-250 degrees C) over a heating period (0-4 h) for a model system ranging between triolein and tripalmitin were modeled by use of an experimental design. The oxidation products of alpha-tocopherol formed under these conditions were alpha-tocopherolquinone (1 .4-7.7%) and epoxy-alpha-tocopherolquinones (4.3-34.8%). The results indicate a very high susceptibility of alpha-tocopherol to capture peroxyl radicals upon oxidation, leading to the formation of polar tocopherol oxidation products. Both alpha-tocopherolquinone and epoxy-alpha-tocopherolquinones were not stable upon prolonged heating and were further degraded to other unknown oxidation products. The kinetics of alpha-tocopherol oxidation were significantly influenced by the triolein/tripalmitin ratio. By increasing the level of triacylglycerol unsaturation the rate of alpha-tocopherol recovery after heating increased significantly from 2.2 to 44.2% whereas in the meantime triacylglycerol polymerization increased from 0 to 3.7%.

Identification of alpha-tocopherol oxidation products in triolein at elevated temperatures.

Abstract: The effect of high-temperature treatment on the stability of α-tocopherol (1) in triolein was assessed under a reduced-pressure atmosphere (4−40 mbar) simulating the deodorization step of the refining of vegetable oils. A marked degradation of 1 was observed, which increased with increasing temperature (180−260 °C) and heating time (20−80 min). The degradation of 1 in triolein at 240 °C was inhibited by the addition of the synthetic antioxidant TBHQ or when heating was performed under nitrogen atmosphere, indicating oxidative degradation. The oxidation products were isolated and identified as α-tocopherolquinone (2), 4a,5-epoxy-α-tocopherolquinone (3), and 7,8-epoxy-α-tocopherolquinone (4). Keywords: α-Tocopherol; α-tocopherolquinone; epoxy-α-tocopherolquinone; thermoxidation; triolein

Biodiesel production through the use of different sources and characterization of oils and their esters as the substitute of diesel: A review

Abstract: The world is confronted with the twin crises of fossil fuel depletion and environmental degradation. The indiscriminate extraction and consumption of fossil fuels have led to a reduction in petroleum reserves. Petroleum based fuels are obtained from limited reserves. These finite reserves are highly concentrated in certain region of the world. Therefore, those countries not having these resources are facing a foreign exchange crisis, mainly due to the import of crude petroleum oil. Hence it is necessary to look for alternative fuels, which can be produced from materials available within the country. Although vegetative oils can be fuel for diesel engines, but their high viscosities, low volatilities and poor cold flow properties have led to the investigation of its various derivatives. Among the different possible sources, fatty acid methyl esters, known as Biodiesel fuel derived from triglycerides (vegetable oil and animal fates) by transesterification with methanol, present the promising alternative substitute to diesel fuels and have received the most attention now a day. The main advantages of using Biodiesel are its renewability, better quality exhaust gas emission, its biodegradability and the organic carbon present in it is photosynthetic in origin. It does not contribute to a rise in the level of carbon dioxide in the atmosphere and consequently to the green house effect. This paper reviews the source of production and characterization of vegetable oils and their methyl ester as the substitute of the petroleum fuel and future possibilities of Biodiesel production.

Vegetable Oils in Food Technology: Composition, Properties, and Uses

Abstract: Preface to the First Edition. Preface to the Second Edition. Contributors. List of Abbreviations. 1 Production and Trade of Vegetable Oils ( Frank D. Gunstone ). 1.1 Extraction, refining and processing. 1.2 Vegetable oils: Production, consumption and trade. 1.3 Some topical issues. 2 Palm Oil ( Siew Wai Lin ). 2.1 Introduction. 2.2 Composition and properties of palm oil and fractions. 2.3 Physical characteristics of palm oil products. 2.4 Minor components of palm oil products. 2.5 Food applications of palm oil products. 2.5.1 Cooking/frying oil. 2.6 Nutritional aspects of palm oil. 2.7 Sustainable palm oil. 2.8 Conclusions. 3 Soybean Oil ( Tong Wang ). 3.1 Introduction. 3.2 Composition of soybean and soybean oil. 3.3 Recovery and refining of soybean oil. 3.4 Oil composition modification by processing and biotechnology. 3.5 Physical properties of soybean oil. 3.6 Oxidation evaluation of soybean oil. 3.7 Nutritional properties of soybean oil. 3.8 Food uses of soybean oil. 4 Canola/Rapeseed Oil ( Roman Przybylski ). 4.1 Introduction. 4.2 Composition. 4.3 Physical and chemical properties. 4.4 Major food uses. 4.5 Conclusion and outlook. 5 Sunflower Oil ( Maria A. Grompone ). 5.1 Introduction. 5.2 Sunflower oil from different types of seed. 5.3 Physical and chemical properties. 5.4 Melting properties and thermal behaviour. 5.5 Extraction and processing of sunflower oil. 5.6 Modified properties of sunflower oil. 5.7 Oxidative stability of commercial sunflower oils. 5.8 Food uses of different sunflower oil types. 5.9 Frying use of commercial sunflower oil types. 6 The Lauric (Coconut and Palm Kernel) Oils ( Ibrahim Nuzul Amri ). 6.1 Introduction. 6.2 Coconut oil. 6.3 Palm kernel oil. 6.4 Processing. 6.5 Food uses. 6.6 Health aspects. 7 Cottonseed Oil ( Michael K. Dowd ). 7.1 Introduction. 7.2 History. 7.3 Seed composition. 7.4 Oil composition. 7.5 Chemical and physical properties of cottonseed oil. 7.6 Processing. 7.7 Cottonseed oil uses. 7.8 Co-product uses. 8 Groundnut (Peanut) Oil ( Lisa L. Dean, Jack P. Davis, and Timothy H. Sanders ). 8.1 Peanut production, history, and oil extraction. 8.2 Oil uses. 8.3 Composition of groundnut oil. 8.4 Chemical and physical characteristics of groundnut oil. 8.5 Health issues. 9 Olive Oil ( Dimitrios Boskou ). 9.1 Introduction. 9.2 Extraction of olive oil from olives. 9.3 Olive oil composition. 9.4 Effect of processing olives on the composition of virgin olive oils. 9.5 Refining and modification. 9.6 Hardening and interesterification. 9.7 Quality, genuineness and regulations. 9.8 Consumption and culinary applications. 10 Corn Oil ( Robert A. Moreau ). 10.1 Composition of corn oil. 10.2 Properties of corn oil. 10.3 Major food uses of corn oil. 10.4 Conclusions. 11 Minor and Speciality Oils ( S. Prakash Kochhar ). 11.1 Introduction. 11.2 Sesame seed oil. 11.3 Rice bran oil. 11.4 Flaxseed (linseed and linola) oil. 11.5 Safflower oil. 11.6 Argan kernel oil. 11.7 Avocado oil. 11.8 Camelina seed oil. 11.9 Grape seed oil. 11.10 Pumpkin seed oil. 11.11 Sea buckthorn oil. 11.12 Cocoa butter and CBE. 11.13 Oils containing a-linolenic acid (GLA) and stearidonic acid (SDA). 11.14 Tree nut oils. Useful Websites. Index.