scispace - formally typeset
Search or ask a question
Author

Troels Kolding

Other affiliations: Nokia Networks, Rutgers University, Nokia  ...read more
Bio: Troels Kolding is an academic researcher from Bell Labs. The author has contributed to research in topics: Telecommunications link & Scheduling (computing). The author has an hindex of 40, co-authored 218 publications receiving 5632 citations. Previous affiliations of Troels Kolding include Nokia Networks & Rutgers University.


Papers
More filters
Proceedings ArticleDOI
22 Apr 2007
TL;DR: An adjusted Shannon capacity formula is introduced, where it is shown that the bandwidth efficiency can be calculated based on system parameters, while the SNR efficiency is extracted from detailed link level studies.
Abstract: In this paper we propose a modification to Shannon capacity bound in order to facilitate accurate benchmarking of UTRAN long term evolution (LTE). The method is generally applicable to wireless communication systems, while we have used LTE air-interface technology as a case study. We introduce an adjusted Shannon capacity formula, where we take into account the system bandwidth efficiency and the SNR efficiency of LTE. Separating these issues, allows for simplified parameter extraction. We show that the bandwidth efficiency can be calculated based on system parameters, while the SNR efficiency is extracted from detailed link level studies including advanced features of MIMO and frequency domain packet scheduling (FDPS). We then use the adjusted Shannon capacity formula combined with G-factor distributions for macro and micro cell scenarios to predict LTE cell spectral efficiency (SE). Such LTE SE predictions are compared to LTE cell SE results generated by system level simulations. The results show an excellent match of less that 5-10% deviation.

580 citations

Patent
Xiang Guang Che1, Troels Kolding1
28 Oct 2009
TL;DR: In this paper, the authors propose a dynamic allocation of subframes as downlink or uplink resources in a time division duplexed over the air (TDD) communications system.
Abstract: Systems and methods for enabling the dynamic allocation of certain sub frames as downlink or uplink resources in a time division duplexed over the air communications system. A base station or eNB may allocate certain subframes within a repeating radio frame of a TDD configuration as either DL or UL subframes for communicating to user equipment or UE devices to increase efficient use of system resources based on the data to be transmitted. Methods for determining the capabilities of a selected UE and based on the determining step, dynamically allocating certain subframes are disclosed. The methods and systems are compatible with user equipment that does not support the dynamic allocation of subframes.

199 citations

Proceedings ArticleDOI
11 Dec 2006
TL;DR: The FDPS performance is shown to depend significantly on the frequency-domain scheduling resolution as well as the accuracy of the channel state reports, and the scheduling resolution should preferably be as low as 375 kHz to yield significant FDPS gain.
Abstract: In this paper we investigate the potential of downlink frequency domain packet scheduling (FDPS) for the 3GPP UTRAN long-term evolution. Utilizing frequency-domain channel quality reports, the scheduler flexibly multiplexes users on different portions of the system bandwidth. Compared to frequency-blind, but time-opportunistic scheduling, FDPS shows gains in both average system capacity and cell-edge data rates on the order of 40%. However, the FDPS performance is shown to depend significantly on the frequency-domain scheduling resolution as well as the accuracy of the channel state reports. Assuming Typical Urban channel profile, studies show that the scheduling resolution should preferably be as low as 375 kHz to yield significant FDPS gain with two-branch receive diversity and in 20 MHz. Further, to have convincing FDPS gain the std. of error of radio state reports needs to be kept within 1.5-2 dB.

171 citations

Journal ArticleDOI
TL;DR: In this article, a de-embedding method is proposed for accurate on-wafer device measurements in the gigahertz range, addressing issues of substrate coupling and contact effects and is therefore suitable for measurements with lossy technologies such as CMOS.
Abstract: In this paper, a de-embedding method is proposed for conducting accurate on-wafer device measurements in the gigahertz range. The method addresses issues of substrate coupling and contact effects and is therefore suitable for measurements with lossy technologies such as CMOS. The method assumes a probe-tip two-port calibration performed with well-known techniques and impedance substrates. By employing a physical interpretation of the test-fixture, the method alleviates a number of known problems with common de-embedding procedures. Four distinct mathematical steps are suggested to de-embed parasitics for the test-fixture to give an accurate measurement of the device under test. By introducing a simple compensation factor for in-fixture standard imperfections, the proposed method allows large devices to be measured with high accuracy. The applicability of the method is demonstrated with measurements up to 12 GHz.

168 citations

Proceedings ArticleDOI
22 Apr 2007
TL;DR: It is shown that frequency-domain packet scheduling can provide a gain of around 35% in both throughput and coverage over opportunistic time-domain only scheduling and by using an equal throughput scheduler coverage can be improved by 100% at the expense of a 5% loss in average cell throughput in comparison with the proportional fair scheduler.
Abstract: In this paper we evaluate the performance of downlink channel dependent scheduling in time and frequency domains. The investigation is based on the 3GPP UTRAN long term evolution (LTE) parameters. A scheduler framework is developed encompassing frequency domain packet scheduling, HARQ management and inter-user fairness control. It is shown that by dividing the packet scheduler into a time-domain and a frequency-domain part the fairness between users can be effectively controlled. Different algorithms are applied in each scheduler part, and the combined performance is evaluated in terms of cell throughput, coverage, and capacity. We show that frequency-domain packet scheduling can provide a gain of around 35% in both throughput and coverage over opportunistic time-domain only scheduling. Furthermore, it is shown that by using an equal throughput scheduler, coverage can be improved by 100% at the expense of a 5% loss in average cell throughput in comparison with the proportional fair scheduler.

165 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.
Abstract: What will 5G be? What it will not be is an incremental advance on 4G. The previous four generations of cellular technology have each been a major paradigm shift that has broken backward compatibility. Indeed, 5G will need to be a paradigm shift that includes very high carrier frequencies with massive bandwidths, extreme base station and device densities, and unprecedented numbers of antennas. However, unlike the previous four generations, it will also be highly integrative: tying any new 5G air interface and spectrum together with LTE and WiFi to provide universal high-rate coverage and a seamless user experience. To support this, the core network will also have to reach unprecedented levels of flexibility and intelligence, spectrum regulation will need to be rethought and improved, and energy and cost efficiencies will become even more critical considerations. This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.

7,139 citations

Journal ArticleDOI
TL;DR: Detailed spatial statistical models of the channels are derived and it is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing.
Abstract: With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York, NY, USA, to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters, including the path loss, number of spatial clusters, angular dispersion, and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.

2,102 citations

Journal ArticleDOI
TL;DR: A general probable 5G cellular network architecture is proposed, which shows that D2D, small cell access points, network cloud, and the Internet of Things can be a part of 5G Cellular network architecture.
Abstract: In the near future, i.e., beyond 4G, some of the prime objectives or demands that need to be addressed are increased capacity, improved data rate, decreased latency, and better quality of service. To meet these demands, drastic improvements need to be made in cellular network architecture. This paper presents the results of a detailed survey on the fifth generation (5G) cellular network architecture and some of the key emerging technologies that are helpful in improving the architecture and meeting the demands of users. In this detailed survey, the prime focus is on the 5G cellular network architecture, massive multiple input multiple output technology, and device-to-device communication (D2D). Along with this, some of the emerging technologies that are addressed in this paper include interference management, spectrum sharing with cognitive radio, ultra-dense networks, multi-radio access technology association, full duplex radios, millimeter wave solutions for 5G cellular networks, and cloud technologies for 5G radio access networks and software defined networks. In this paper, a general probable 5G cellular network architecture is proposed, which shows that D2D, small cell access points, network cloud, and the Internet of Things can be a part of 5G cellular network architecture. A detailed survey is included regarding current research projects being conducted in different countries by research groups and institutions that are working on 5G technologies.

1,899 citations

Journal ArticleDOI
TL;DR: The need for an alternative strategy, where low power nodes are overlaid within a macro network, creating what is referred to as a heterogeneous network is discussed, and a high-level overview of the 3GPP LTE air interface, network nodes, and spectrum allocation options is provided, along with the enabling mechanisms.
Abstract: As the spectral efficiency of a point-to-point link in cellular networks approaches its theoretical limits, with the forecasted explosion of data traffic, there is a need for an increase in the node density to further improve network capacity. However, in already dense deployments in today's networks, cell splitting gains can be severely limited by high inter-cell interference. Moreover, high capital expenditure cost associated with high power macro nodes further limits viability of such an approach. This article discusses the need for an alternative strategy, where low power nodes are overlaid within a macro network, creating what is referred to as a heterogeneous network. We survey current state of the art in heterogeneous deployments and focus on 3GPP LTE air interface to describe future trends. A high-level overview of the 3GPP LTE air interface, network nodes, and spectrum allocation options is provided, along with the enabling mechanisms for heterogeneous deployments. Interference management techniques that are critical for LTE heterogeneous deployments are discussed in greater detail. Cell range expansion, enabled through cell biasing and adaptive resource partitioning, is seen as an effective method to balance the load among the nodes in the network and improve overall trunking efficiency. An interference cancellation receiver plays a crucial role in ensuring acquisition of weak cells and reliability of control and data reception in the presence of legacy signals.

1,734 citations

Book
05 Mar 2012
TL;DR: Computer Networking: A Top-Down Approach Featuring the Internet explains the engineering problems that are inherent in communicating digital information from point to point, and presents the mathematics that determine the best path, show some code that implements those algorithms, and illustrate the logic by using excellent conceptual diagrams.
Abstract: Certain data-communication protocols hog the spotlight, but all of them have a lot in common. Computer Networking: A Top-Down Approach Featuring the Internet explains the engineering problems that are inherent in communicating digital information from point to point. The top-down approach mentioned in the subtitle means that the book starts at the top of the protocol stack--at the application layer--and works its way down through the other layers, until it reaches bare wire. The authors, for the most part, shun the well-known seven-layer Open Systems Interconnection (OSI) protocol stack in favor of their own five-layer (application, transport, network, link, and physical) model. It's an effective approach that helps clear away some of the hand waving traditionally associated with the more obtuse layers in the OSI model. The approach is definitely theoretical--don't look here for instructions on configuring Windows 2000 or a Cisco router--but it's relevant to reality, and should help anyone who needs to understand networking as a programmer, system architect, or even administration guru.The treatment of the network layer, at which routing takes place, is typical of the overall style. In discussing routing, authors James Kurose and Keith Ross explain (by way of lots of clear, definition-packed text) what routing protocols need to do: find the best route to a destination. Then they present the mathematics that determine the best path, show some code that implements those algorithms, and illustrate the logic by using excellent conceptual diagrams. Real-life implementations of the algorithms--including Internet Protocol (both IPv4 and IPv6) and several popular IP routing protocols--help you to make the transition from pure theory to networking technologies. --David WallTopics covered: The theory behind data networks, with thorough discussion of the problems that are posed at each level (the application layer gets plenty of attention). For each layer, there's academic coverage of networking problems and solutions, followed by discussion of real technologies. Special sections deal with network security and transmission of digital multimedia.

1,079 citations