Tsung-Wu Lin

Bio: Tsung-Wu Lin is an academic researcher from Tunghai University. The author has contributed to research in topics: Graphene & Materials science. The author has an hindex of 31, co-authored 71 publications receiving 5424 citations. Previous affiliations of Tsung-Wu Lin include University of Oxford & Academia Sinica.

Synthesis of Large‐Area MoS2 Atomic Layers with Chemical Vapor Deposition

Abstract: Large-area MoS(2) atomic layers are synthesized on SiO(2) substrates by chemical vapor deposition using MoO(3) and S powders as the reactants. Optical, microscopic and electrical measurements suggest that the synthetic process leads to the growth of MoS(2) monolayer. The TEM images verify that the synthesized MoS(2) sheets are highly crystalline.

Hierarchically structured Ni(3)S(2)/carbon nanotube composites as high performance cathode materials for asymmetric supercapacitors.

Abstract: The Ni3S2 nanoparticles with the diameters ranging from 10 to 80 nm are grown on the backbone of conductive multiwalled carbon nanotubes (MWCNTs) using a glucose-assisted hydrothermal method. It is found that the Ni3S2 nanoparticles deposited on MWCNTs disassemble into smaller components after the composite electrode is activated by the consecutive cyclic voltammetry scan in a 2 M KOH solution. Therefore, the active surface area of the Ni3S2 nanoparticles is increased, which further enhances the capacitive performance of the composite electrode. Because the synergistic effect of the Ni3S2 nanoparticles and MWCNTs on the capacitive performance of the composite electrode is pronounced, the composite electrode shows a high specific capacitance of 800 F/g and great cycling stability at a current density of 3.2 A/g. To examine the capacitive performance of the composite electrode in a full-cell configuration, an asymmetric supercapacitor device was fabricated by using the composite of Ni3S2 and MWCNTs as the c...

Facile synthesis of MoS2/graphene nanocomposite with high catalytic activity toward triiodide reduction in dye-sensitized solar cells

Abstract: In the current study, a nanocomposite of molybdenum disulfide and graphene (MoS2/RGO) was proposed for the first time as the counter electrode (CE) catalyst in dye-sensitized solar cells (DSSCs) to speed up the reduction of triiodide (I3−) to iodide (I−). This novel catalyst was synthesized by simply mixing graphene oxide nanosheets with a solution of ammonium tetrathiomolybdate and then converting the solid intermediate into MoS2/RGO nanocomposite in a H2 flow at 650 °C. Atomic force microscopy, X-ray powder diffraction and X-ray photoemission spectroscopy confirmed that MoS2 nanoparticles were deposited onto the graphene surface. The extensive cyclic voltammograms (CV) showed that the cathodic current density of the MoS2/RGO CE was higher than those of MoS2, RGO and sputtered Pt CEs, due to the increased active surface area of the former. Moreover, the peak current densities of the MoS2/RGO CE showed no sign of degradation after 100 consecutive CV tests, suggesting the great electrochemical stability of the MoS2/RGO CE. Furthermore, the MoS2/RGO CE demonstrated an impressively low charge-transfer resistance (0.57 Ω cm2) for I3− reduction. Finally, the DSSC assembled with the MoS2/RGO CE showed a high power conversion efficiency of 6.04%, which is comparable to the DSSC with a Pt CE (6.38%).

Few-layer MoS2 nanosheets coated onto multi-walled carbon nanotubes as a low-cost and highly electrocatalytic counter electrode for dye-sensitized solar cells

Abstract: In the current study, the nanocomposite of molybdenum disulfide and multi-walled carbon nanotubes (MWCNT@MoS2) was proposed for the first time as a counter electrode (CE) catalyst in dye-sensitized solar cells (DSSCs) to speed up the reduction of triiodide (I3−) to iodide (I−). This novel catalyst was synthesized by simply mixing MWCNTs and MoS2 in an acidic solution and then converting the solid intermediate into the MWCNT@MoS2 nanocomposite in a H2 flow at 650 °C. X-ray powder diffraction, Raman and X-ray photoemission spectroscopy confirmed the composition and the structure of the MWCNT@MoS2 nanocomposite. The microstructure details of the nanocomposite were studied by transmission electron microscopy, showing that only a few-layers of the MoS2 nanosheets were formed on the MWCNT surface. This unique structure is beneficial to the improvement of the catalytic activity of MWCNT@MoS2 towards the reduction of I3−. The extensive cyclic voltammograms (CV) showed that the cathodic current density of the MWCNT@MoS2 CE was higher than those of MoS2, MWCNT and sputtered Pt CEs due to the increased active surface area of the former. Moreover, the peak current densities of the MWCNT@MoS2 CE showed no sign of degradation after consecutive 100 CV tests, suggesting the great electrochemical stability of the MWCNT@MoS2 CE. Furthermore, the MWCNT@MoS2 CE demonstrated an impressive low charge-transfer resistance (1.69 Ω cm2) for I3− reduction. Finally, the DSSC assembled with the MWCNT@MoS2 CE showed a high power conversion efficiency of 6.45%, which is comparable to the DSSC with Pt CE (6.41%).

High energy density asymmetric supercapacitor based on NiOOH/Ni3S2/3D graphene and Fe3O4/graphene composite electrodes.

Abstract: The application of the composite of Ni3S2 nanoparticles and 3D graphene as a novel cathode material for supercapacitors is systematically investigated in this study. It is found that the electrode capacitance increases by up to 111% after the composite electrode is activated by the consecutive cyclic voltammetry scanning in 1 M KOH. Due to the synergistic effect, the capacitance and the diffusion coefficient of electrolyte ions of the activated composite electrode are ca. 3.7 and 6.5 times higher than those of the Ni3S2 electrode, respectively. Furthermore, the activated composite electrode exhibits an ultrahigh specific capacitance of 3296 F/g and great cycling stability at a current density of 16 A/g. To obtain the reasonable matching of cathode/anode electrodes, the composite of Fe3O4 nanoparticles and chemically reduced graphene oxide (Fe3O4/rGO) is synthesized as the anode material. The Fe3O4/rGO electrode exhibits the specific capacitance of 661 F/g at 1 A/g and excellent rate capability. More importantly, an asymmetric supercapacitor fabricated by two different composite electrodes can be operated reversibly between 0 and 1.6 V and obtain a high specific capacitance of 233 F/g at 5 mV/s, which delivers a maximum energy density of 82.5 Wh/kg at a power density of 930 W/kg.

Electronics and optoelectronics of two-dimensional transition metal dichalcogenides.

Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.

The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets

Abstract: Ultrathin two-dimensional nanosheets of layered transition metal dichalcogenides (TMDs) are fundamentally and technologically intriguing. In contrast to the graphene sheet, they are chemically versatile. Mono- or few-layered TMDs - obtained either through exfoliation of bulk materials or bottom-up syntheses - are direct-gap semiconductors whose bandgap energy, as well as carrier type (n- or p-type), varies between compounds depending on their composition, structure and dimensionality. In this Review, we describe how the tunable electronic structure of TMDs makes them attractive for a variety of applications. They have been investigated as chemically active electrocatalysts for hydrogen evolution and hydrosulfurization, as well as electrically active materials in opto-electronics. Their morphologies and properties are also useful for energy storage applications such as electrodes for Li-ion batteries and supercapacitors.

Progress, Challenges, and Opportunities in Two-Dimensional Materials Beyond Graphene

Abstract: Graphene’s success has shown that it is possible to create stable, single and few-atom-thick layers of van der Waals materials, and also that these materials can exhibit fascinating and technologically useful properties. Here we review the state-of-the-art of 2D materials beyond graphene. Initially, we will outline the different chemical classes of 2D materials and discuss the various strategies to prepare single-layer, few-layer, and multilayer assembly materials in solution, on substrates, and on the wafer scale. Additionally, we present an experimental guide for identifying and characterizing single-layer-thick materials, as well as outlining emerging techniques that yield both local and global information. We describe the differences that occur in the electronic structure between the bulk and the single layer and discuss various methods of tuning their electronic properties by manipulating the surface. Finally, we highlight the properties and advantages of single-, few-, and many-layer 2D materials in...

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...