The conversion efficiency of heat to electricity in thermoelectric materials depends on both their thermopower and electrical conductivity. It is now reported that, unlike their inorganic counterparts, organic thermoelectric materials show an improvement in both these parameters when the volume of dopant elements is minimized; furthermore, a high conversion efficiency is achieved in PEDOT:PSS blends.

Engineered doping of organic semiconductors for enhanced thermoelectric efficiency

A stretchable resistive pressure sensor is achieved by coating a compressible substrate with a highly stretchable electrode. The substrate contains an array of microscale pyramidal features, and the electrode comprises a polymer composite. When the pressure-induced geometrical change experienced by the electrode is maximized at 40% elongation, a sensitivity of 10.3 kPa(-1) is achieved.

Highly Stretchable Resistive Pressure Sensors Using a Conductive Elastomeric Composite on a Micropyramid Array

A polymer composition includes a conductive polymer and at least one stretchability and electrical conductivity (STEC) enhancer, wherein a content of the STEC enhancer in the composition is at least about 1 wt.% of the composition.

Highly stretchable, transparent, and conductive polymer

Rechargeable lithium–sulfur (Li–S) batteries hold great potential for next-generation high-performance energy storage systems because of their high theoretical specific energy, low materials cost, and environmental safety. One of the major obstacles for its commercialization is the rapid capacity fading due to polysulfide dissolution and uncontrolled redeposition. Various porous carbon structures have been used to improve the performance of Li–S batteries, as polysulfides could be trapped inside the carbon matrix. However, polysulfides still diffuse out for a prolonged time if there is no effective capping layer surrounding the carbon/sulfur particles. Here we explore the application of conducting polymer to minimize the diffusion of polysulfides out of the mesoporous carbon matrix by coating poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS) onto mesoporous carbon/sulfur particles. After surface coating, coulomb efficiency of the sulfur electrode was improved from 93% to 97%, and capaci...

/pdf/improving-the-performance-of-lithium-sulfur-batteries-by-5ahapnkjt0.pdf

Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating

In vivo electrophysiological recordings of neuronal circuits are necessary for diagnostic purposes and for brain-machine interfaces. Organic electronic devices constitute a promising candidate because of their mechanical flexibility and biocompatibility. Here we demonstrate the engineering of an organic electrochemical transistor embedded in an ultrathin organic film designed to record electrophysiological signals on the surface of the brain. The device, tested in vivo on epileptiform discharges, displayed superior signal-to-noise ratio due to local amplification compared with surface electrodes. The organic transistor was able to record on the surface low-amplitude brain activities, which were poorly resolved with surface electrodes. This study introduces a new class of biocompatible, highly flexible devices for recording brain activity with superior signal-to-noise ratio that hold great promise for medical applications.

/pdf/in-vivo-recordings-of-brain-activity-using-organic-2ntdhyjgde.pdf

In vivo recordings of brain activity using organic transistors

The Discovery and Development of Conducting Polymers The Scope of This Historical Overview Introduction An Early Example: Polyaniline The First Electrically Conductive Poly(Heterocycle): Polypyrrole The Fundamental Breakthrough: Doped Polyacetylene Conductive Polymers versus Metals and Insulators Metals, Semiconductors, and Insulators Conjugated Polymers Temperature-Dependent Conductivity Order and Disorder Polythiophenes: A Chance for Maximum Conductivity? Oxygen-Substituted Polythiophenes A Short History of the PEDOT Invention The Synthesis of EDOT Monomer, and Its Physical and Chemical Properties Monomer Synthesis Physical Properties Chemical Properties From EDOT to PEDOT: Oxidative Polymerization and Other Routes Oxidative Polymerization and Doping "Self-Oxidation" of EDOT Halogen Derivatives The Organometallic Route to PEDOT Neutral, Undoped PEDOT by Oxidative Polymerization Counterions for PEDOT Counterions in Electrochemically Polymerized PEDOT Counterions in Chemically Polymerized PEDOT The In Situ Polymerization of EDOT to PEDOT Synthesis of In Situ PEDOT Properties of In Situ PEDOT In Situ Polymerization of EDOT Derivatives and Relatives PEDOT: PSS PEDOT: PSS Dispersions Properties of PEDOT: PSS Secondary Doping Applications Solid Electrolyte Capacitors Through Hole Plating for Printed Wiring Boards ITO Substitution Antistatic Coatings Electroluminescent Lamps Organic Light Emitting Diodes (OLEDs) PEDOT:PSS in Organic Solar Cells Electrochromic Behavior Organic Field-Effect Transistors Technical Use and Commercial Aspects EDOT and PEDOT Derivatives with Covalently Attached Side Groups EDOT-CH2OH and Its Derivatives EDOT-CH2Cl and Its Follow-Up Products Alkyl EDOTs Water Soluble, "Self-Doping" EDOT Derivatives XDOTs, EDXTs, EDOXs, and 2(5)-X(2)-EDOTs: Ring Size Variations, Heteroanalogs, and Derivatives of EDOT with Substituents at the Thiophene Ring 3,4-Methylenedioxythiophene (MDOT) ProDOT (Propylenedioxythiophene) Derivatives Vinylenedioxythiophene (VDOT) and Benzo-EDOT 3,4-Ethyleneoxythiathiophene (EOTT) 3,4-Ethylene dithiathiophene (EDTT) 3,4-Ethylenedioxypyrrole (EDOP) and Its Derivatives 3,4-Ethylenedioxyselenophene (EDOS) 2,5-Disubstituted EDOT Derivatives [2(,5)-X(2)-EDOTs] The Electrochemical Behavior of EDOT and PEDOT

PEDOT : Principles and Applications of an Intrinsically Conductive Polymer

Electrolytic capacitors having low equivalent series resistance and low leakage current are described. The electrolytic capacitors include a solid electrolyte layer of a conductive material in particular a conductive polymer, and an outer layer that includes binders, polymeric anions and conductive polymers (e.g., polythiophenes). Also described is a method of preparing electrolytic capacitors that involves forming the conductive polymer of the solid electrolyte layer in situ by means of chemical oxidative polymerization or electrochemical polymerization. Electronic circuits that include the electrolytic capacitors are also described.

Electrolytic capacitors with polymeric outer layer

The invention relates to a process for the production of electrolyte capacitors having a low equivalent series resistance and low residual current, and which comprise a solid electrolyte of conductive polymers and an outer layer comprising conductive polymers applied in the form of a dispersion. Electrolyte capacitors produced by this process and the use of such electrolyte capacitors are also provided.

Electrolyte capacitors having a polymeric outer layer and process for their production

The present invention relates to a method for manufacturing an electrolytic capacitor comprising the following method steps: a) provision of an electrode body (1) made of an electrode material (2), wherein a dielectric (3) at least partially covers a surface (4) of this electrode material (2) to obtain an anode body (5); b) introduction of a dispersion, which comprises particles of an electrically con ductive polymer with a particle size (d 50 ) of 70 nm and less and a dispersing agent, into at least a part of the anode body (5); c) at least partial removal of the dispersing agent to obtain a capacitor body (7); d) introduction, into the capacitor body (7), of a polyalkylene glycol or a polyalkylene glycol derivative or a combination of at least two thereof as an impregnating agent (8). The invention also relates to an electrolytic capacitor manufactured with this method, the use of an electrolytic capacitor and electronic circuits.

A method for improving electrical parameters in capacitors comprising pedot/pss as a solid electrolyte through a polyalkylene glycol

Process for preparing specific oxidants which in mixtures with precursors for preparing conductive polymers display a long processing time during the polymerization; oxidants obtainable by this process; mixtures comprising such specific (retarding) oxidants and the use of said oxidants for preparing solid electrolyte capacitors and conductive layers.

Udo Merker

Papers

PEDOT : Principles and Applications of an Intrinsically Conductive Polymer

Electrolytic capacitors with polymeric outer layer

Electrolyte capacitors having a polymeric outer layer and process for their production

A method for improving electrical parameters in capacitors comprising pedot/pss as a solid electrolyte through a polyalkylene glycol

Specific oxidation agents for producing conductive polymers