Ulf Schuchardt

Bio: Ulf Schuchardt is an academic researcher from State University of Campinas. The author has contributed to research in topics: Catalysis & Cyclohexane. The author has an hindex of 41, co-authored 184 publications receiving 8171 citations. Previous affiliations of Ulf Schuchardt include Max Planck Society & Federal University of São Carlos.

Transesterification of vegetable oils: a review

Abstract: The transesterification of vegetable oils with methanol as well as the main uses of the fatty acid methyl esters are reviewed. The general aspects of this process and the applicability of different types of catalysts (acids, alkaline metal hydroxides, alkoxides and carbonates, enzymes and non-ionic bases, such as amines, amidines, guanidines and triamino(imino)phosphoranes) are described. Special attention is given to guanidines, which can be easily heterogenized on organic polymers. However, the anchored catalysts show leaching problems. New strategies to obtain non-leaching guanidine-containing catalysts are proposed. Finally, several applications of fatty acid esters, obtained by transesterification of vegetable oils, are described.

Heterogeneous Catalysts for Liquid-Phase Oxidations: Philosophers' Stones or Trojan Horses?

Abstract: Introduction In the early seventies one of us1 was involved in the development of the heterogeneous Ti(IV)/SiO2 catalyst which forms the basis of the Shell process for the epoxidation of propylene with ethylbenzene hydroperoxide (reaction 1).2 Halcon3 and ARCO4,5 workers had previously found, independently, that soluble compounds of early transition metals, e.g., Mo, W, Ti, and V, catalyze reaction 1. The mechanism of catalysis involves withdrawal of electrons from a coordinated alkylperoxo moiety, thereby increasing the electrophilic character of the peroxidic oxygens, i.e., the metal ion acts as a Lewis acid. Hence, effective catalysts are both a strong Lewis acid and a weak oxidant in their highest oxidation state. The latter criterion is necessary in order to minimize competing one-electron oxidation of the ROO ligand leading to homolytic decomposition of ROOH (see Scheme 1). These criteria are best met by molybdenum(VI), and soluble molybdenum compounds exhibit the best combination of activity and selectivity.6,7 Soluble titanium(IV) compounds, on the other hand, are rather mediocre catalysts for reaction 1. In contrast, Ti(IV)/SiO2 exhibits selectivities comparable to homogeneous molybdenum and (for a heterogeneous catalyst) high activities.8 The superior catalytic activity of Ti(IV)/SiO2 was attributed to both an increase in Lewis acidity of the Ti(IV), owing to electron withdrawal by silanoxy ligands, and to site isolation of discrete Ti(IV) centers in the silica lattice preventing oligomerization to unreactive μ-oxo species (which readily occurs with soluble Ti(IV) compounds). Furthermore, it was demonstrated that only the combination of titanium(IV) with silica affords a stable heterogeneous catalyst; all other combinations, e.g., Mo(VI), W(VI), V(V), etc., on silica, gave rapid leaching of the metal ion. One property which soluble Ti(IV) compounds and Ti(IV)/SiO2 share is a marked sensitivity toward deactivation by strongly coordinating ligands, especially water.9 For this reason Ti(IV)/ SiO2 is an ineffective catalyst for epoxidations with aqueous hydrogen peroxide. Hence the appearance in the mid-eighties of Enichem patents10 describing the remarkable catalytic activity of titanium(IV) silicalite (generally known as TS-1) in, inter alia, the selective epoxidation of olefins under very mild conditions with 30% aqueous hydrogen peroxide (Figure 1) was greeted with some scepticism. Thus, two materials, Ti(IV)/SiO2 and TS-1, having roughly the same elemental composition, i.e., 2% Ti in SiO2, exhibited totally different catalytic properties. Initial attempts by various groups to reproduce the Enichem results were largely unsuccessful. However, once it became clear that certain parameters in the synthesis

Cyclohexane oxidation continues to be a challenge

Abstract: Many efforts have been made to develop new catalysts to oxidize cyclohexane under mild conditions. Herein, we review the most interesting systems for this process with different oxidants such as hydrogen peroxide, tert -butyl hydroperoxide and molecular oxygen. Using H 2 O 2 , Na-GeX has been shown to be a most stable and active catalyst. Mesoporous TS-1 and Ti-MCM-41 are also stable, but the use of other metals such as Cr, V, Fe and Mo leads to leaching of the metal. Homogeneous systems based on binuclear manganese(IV) complexes have also been shown to be interesting. When t -BuOOH is used, the active systems are those phthalocyanines based on Ru, Co and Cu and polyoxometalates of dinuclear ruthenium and palladium. Microporous metallosilicates containing different transition metals showed leaching of the metal during the reactions. Molecular oxygen can be used directly as an oxidant and decreases the leaching of active species in comparison to hydrogen peroxide and tert -butyl hydroperoxide. Metal aluminophosphates (metal: Mn, Fe, Co, Cu, Cr V) are active and relatively stable under such conditions. Mn-AlPO-36 yields directly adipic acid, but large amounts of carboxylic acids should be avoided, as they cause metal leaching from the catalysts. Rare earth exchanged zeolite Y also shows good selectivity and activity. In the last part of the review, novel alternative strategies for the production of cyclohexanol and cyclohexanone and the direct synthesis of adipic acid are discussed.

1H nuclear magnetic resonance determination of the yield of the transesterification of rapeseed oil with methanol

Abstract: The formation of fatty acid methyl esters by transesterification with methanol can be monitored by1H nuclear magnetic resonance spectroscopy; this accurate determination is simpler than chromatographic methods

Oxidative Transformations of Organic Compounds Mediated by Redox Molecular Sieves

Abstract: Zeolites are viewed by some as the “philosopher's stone” of modern chemistry.[1] They are more or less indispensable in oil refining and petrochemicals manufacture where they are widely applied as solid acid catalysts. More recently attention has been focused on their use in the manufacture of fine chemicals. The synthetic utility of zeolites and related molecular sieves (zeotypes) has been considerably extended by the incorporation of redox metals into their frameworks. The resulting redox molecular sieves catalyze a variety of selective oxidations under mild conditions in the liquid phase. Their structural diversity–including variation of the redox metal, incorporation of metal complexes, and the size and polarity of the micropores–provides the possibility of designing tailor-made solid catalysts (“mineral enzymes”) for liquid-phase oxidations with clean oxidants such as O2, H2O2, and RO2H. Hence, they have enormous potential in industrial organic synthesis as environmentally friendly alternatives to traditional oxidations employing inorganic oxidants in stoichiometric amounts. A primary aim of this review is to familiarize organic chemists with the synthetic potential of redox molecular sieves. An outline of their synthesis, structures, and chemical properties, highlighting their unique advantages, is followed by a discussion of general (mechanistic) features that influence the choice of a suitable catalyst for a particular type of oxidation. The main part of the review deals with the oxidation of various substrates of synthetic interest–such as alkanes, alkenes, (alkyl)arenes, alcohols, and amines–and emphasizes the advantages of redox molecular sieves (including selectivity and stability) over their homogeneous counterparts. New directions towards truly biomimetic solid catalysts, for example zeolite-encapsulated chiral metal complexes as heterogeneous catalysts for asymmetric oxidations, are high-lighted.

Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering.

Abstract: 1.0. Introduction 4044 2.0. Biomass Chemistry and Growth Rates 4047 2.1. Lignocellulose and Starch-Based Plants 4047 2.2. Triglyceride-Producing Plants 4049 2.3. Algae 4050 2.4. Terpenes and Rubber-Producing Plants 4052 3.0. Biomass Gasification 4052 3.1. Gasification Chemistry 4052 3.2. Gasification Reactors 4054 3.3. Supercritical Gasification 4054 3.4. Solar Gasification 4055 3.5. Gas Conditioning 4055 4.0. Syn-Gas Utilization 4056 4.1. Hydrogen Production by Water−Gas Shift Reaction 4056

Chemical Routes for the Transformation of Biomass into Chemicals

Abstract: 3.2.3. Hydroformylation 2467 3.2.4. Dimerization 2468 3.2.5. Oxidative Cleavage and Ozonolysis 2469 3.2.6. Metathesis 2470 4. Terpenes 2472 4.1. Pinene 2472 4.1.1. Isomerization: R-Pinene 2472 4.1.2. Epoxidation of R-Pinene 2475 4.1.3. Isomerization of R-Pinene Oxide 2477 4.1.4. Hydration of R-Pinene: R-Terpineol 2478 4.1.5. Dehydroisomerization 2479 4.2. Limonene 2480 4.2.1. Isomerization 2480 4.2.2. Epoxidation: Limonene Oxide 2480 4.2.3. Isomerization of Limonene Oxide 2481 4.2.4. Dehydroisomerization of Limonene and Terpenes To Produce Cymene 2481

Hydrogen storage in metal–organic frameworks

Abstract: New materials capable of storing hydrogen at high gravimetric and volumetric densities are required if hydrogen is to be widely employed as a clean alternative to hydrocarbon fuels in cars and other mobile applications. With exceptionally high surface areas and chemically-tunable structures, microporous metal–organic frameworks have recently emerged as some of the most promising candidate materials. In this critical review we provide an overview of the current status of hydrogen storage within such compounds. Particular emphasis is given to the relationships between structural features and the enthalpy of hydrogen adsorption, spectroscopic methods for probing framework–H2 interactions, and strategies for improving storage capacity (188 references).

The Catalytic Valorization of Lignin for the Production of Renewable Chemicals

Abstract: Biomass is an important feedstock for the renewable production of fuels, chemicals, and energy. As of 2005, over 3% of the total energy consumption in the United States was supplied by biomass, and it recently surpassed hydroelectric energy as the largest domestic source of renewable energy. Similarly, the European Union received 66.1% of its renewable energy from biomass, which thus surpassed the total combined contribution from hydropower, wind power, geothermal energy, and solar power. In addition to energy, the production of chemicals from biomass is also essential; indeed, the only renewable source of liquid transportation fuels is currently obtained from biomass.