Uma M. Sundaram

Bio: Uma M. Sundaram is an academic researcher from Stanford University. The author has contributed to research in topics: Chemistry & Organoid. The author has an hindex of 5, co-authored 7 publications receiving 3783 citations.

Multicopper Oxidases and Oxygenases

Abstract: Copper is an essential trace element in living systems, present in the parts per million concentration range. It is a key cofactor in a diverse array of biological oxidation-reduction reactions. These involve either outer-sphere electron transfer, as in the blue copper proteins and the Cu{sub A} site of cytochrome oxidase and nitrous oxide redutase, or inner-sphere electron transfer in the binding, activation, and reduction of dioxygen, superoxide, nitrite, and nitrous oxide. Copper sites have historically been divided into three classes based on their spectroscopic features, which reflect the geometric and electronic structure of the active site: type 1 (T1) or blue copper, type 2 (T2) or normal copper, and type 3 (T3) or coupled binuclear copper centers. 428 refs.

Chemical and Spectroscopic Definition of the Peroxide-Level Intermediate in the Multicopper Oxidases: Relevance to the Catalytic Mechanism of Dioxygen Reduction to Water

Abstract: Laccase is a multicopper oxidase which contains four coppers, one type 1, one type 2, and a coupled binuclear type 3 pair, the type 2 and type 3 copper centers together forming a trinuclear copper ...

Spectroscopic Investigation of Peroxide Binding to the Trinuclear Copper Cluster Site in Laccase: Correlation with the Peroxy-Level Intermediate and Relevance to Catalysis

Abstract: Laccase is a multicopper oxidase which contains four coppers, one type 1, one type 2, and a coupled binuclear type 3 pair, the type 2 and type 3 copper centers together forming a trinuclear copper cluster. The type 1 mercury derivative of laccase (T1Hg Lc) has the type 1 center substituted with a redox-inactive Hg2+ ion and an intact trinuclear copper cluster. Reaction of H2O2 with fully oxidized T1Hg Lc produces a peroxide adduct which has now been studied in detail. Peroxide is shown to bind to the trinuclear cluster with low affinity, producing spectral and geometric features similar to the intermediate formed in the reduction of O2 to H2O which had been shown to have the type 2 copper reduced, the type 3 pair oxidized and antiferromagnetically coupled, and two coppers bridged at a distance of 3.4 A. The peroxide adduct and the intermediate have similar geometric and electronic features with the type 2 oxidized in the adduct. This center is paramagnetic and has been studied in detail. Peroxide binds to...

Multicopper Oxidases and Oxygenases

Abstract: Copper is an essential trace element in living systems, present in the parts per million concentration range. It is a key cofactor in a diverse array of biological oxidation-reduction reactions. These involve either outer-sphere electron transfer, as in the blue copper proteins and the Cu{sub A} site of cytochrome oxidase and nitrous oxide redutase, or inner-sphere electron transfer in the binding, activation, and reduction of dioxygen, superoxide, nitrite, and nitrous oxide. Copper sites have historically been divided into three classes based on their spectroscopic features, which reflect the geometric and electronic structure of the active site: type 1 (T1) or blue copper, type 2 (T2) or normal copper, and type 3 (T3) or coupled binuclear copper centers. 428 refs.

Fungal laccases - occurrence and properties.

Abstract: Laccases of fungi attract considerable attention due to their possible involvement in the transformation of a wide variety of phenolic compounds including the polymeric lignin and humic substances. So far, more than a 100 enzymes have been purified from fungal cultures and characterized in terms of their biochemical and catalytic properties. Most ligninolytic fungal species produce constitutively at least one laccase isoenzyme and laccases are also dominant among ligninolytic enzymes in the soil environment. The fact that they only require molecular oxygen for catalysis makes them suitable for biotechnological applications for the transformation or immobilization of xenobiotic compounds.

Geometric and Electronic Structure/Function Correlations in Non-Heme Iron Enzymes

Abstract: ion step follows the decarboxylation, which is consistent with the deuterium isotopic effects observed for thymine 7-hydroxylase which indicate that an irreversible step (or steps) occurs prior to the C-H bond breaking.395 It has also been shown for prolyl 4-hydroxylase that a substrate-derived radical is generated in the reaction, which is consistent with a rebound mechanism.437 It is important to point out that no oxygen intermediate (i.e., bridged superoxo or oxo-ferryl) has been observed for any R-KGdependent enzyme. This warrants future theoretical and experimental study. A detailed molecular mechanism has been proposed for IPNS based on spectroscopic and crystallographic studies.422 Resting IPNS/FeII is also 6C and thus relatively stable toward dioxygen. Substrate ACV binds directly to FeII IPNS through its thiolate group, providing an open coordination position at the FeII. O2 can then react to form an FeIII-superoxo intermediate. This intermediate is suggested422 to perform the first hydrogen-atom abstraction step and close the â-lactam ring, resulting in the formation of the first water molecule and generating an FeIVdO-II intermediate, which completes the second ringclosure process by hydrogen-atom abstraction forming a thiazolidine ring. Previously proposed mechanisms of ACCO involved direct binding of cosubstrate ascorbate to the iron before O2 as part of the oxygen activation process.438,439 The EPR and ESEEM studies of the NO complex of ACCO suggested a quite different molecular mechanism for ACCO.435 An FeIII-superoxo intermediate is proposed. Whether it is preceded by a 6C f 5C process with substrate binding is presently under study.440 This intermediate is thought to initiate a radical process by single hydrogen-atom abstraction or electron-coupled proton transfer (PT)ion or electron-coupled proton transfer (PT) from the bound amino group. The resulting substrate radical may undergo spontaneous conversion into products. The role of cosubstrate ascorbate is proposed to reduce the toxic peroxo byproduct to water. Alternatively, the two-electron reduction of FeIIIsuperoxo by the cosubstrate ascorbate could result in an FeIVdO-II intermediate which initiates the radical reaction.435 4. Rieske-Type Dioxygenases Biochemical Characterization. The Rieske ironsulfur center is a two iron-two sulfur cluster ([2Fe2S]) which has a 2His (on one iron), 2Cys (on the other iron) coordination environment, instead of the 4Cys present in plant ferredoxins. It plays a key role in the electron transport pathway in membranebound cytochrome complexes as well as in some dioxygenases.441 The latter are mainly comprised of two protein components: a reductase containing flavin and a ferredoxin [2Fe-2S], and a terminal oxygenase containing a Rieske [2Fe-2S] cluster and a non-heme iron active site.442 Except for the recently reported alkene monooxygenase that has a binuclear iron site in its terminal oxygenase,10 most of the Rieske-type oxygenases have a mononuclear iron site, which is believed to be the site of dioxygen activation and substrate oxygenation.442,443 The majority of the Rieske-type mononuclear non-heme oxygenases form a family of enzymes which are aromatic-ring-hydroxylating dioxygenases. These catalyze the regioand stereospecific cis-dihydroxylation of an aromatic ring using dioxygen and NAD(P)H (Table 1). Examples include benzene dioxygenase (BDO, EC 1.14.12.3),444 phthalate dioxygenase (PDO, EC 1.14.12.7),445 toluene dioxygenase (EC 1.14.12.11),446 and naphthalene 1,2-dioxygenase (NDO, EC 1.14.12.12),447 which initiate the aerobic degradation of aromatic compounds in the soil bacteria and are targets for bioengineering in bioremediation. This step is the first step in the pathway that ultimately leads to ring cleavage by the intraand extradiol dioxygenases (sections II.B.2 and II.C.1).443 Besides these bacterial dioxygenases, other Rieske-type mononuclear non-heme oxygenases include anthranilate 1,2-dioxygenase (EC 1.14.12.1),448 which deaminates and decarboxylates the substrate to produce catechol; chlorophenylacetate 3,4-dioxygenase (EC 1.14.2.13),449 which converts substrate to catechol with chloride elimination; and 4-methoxybenzoate O-demethylase (putidamonooxin),450 which catalyzes the conversion of 4-methoxybenzoic acid to 4-hydroxybenzoic acid and formaldehyde. The reductase component is usually a monomer (MW ) 12-15 kDa) and utilizes flavin to mediate ET from the two-electron donor NAD(P)H to the oneelectron acceptor [2Fe-2S] cluster and is specific to each terminal oxygenase; other electron donors do not support efficient oxygenation.442 The crystal structure of phthalate dioxygenase reductase is available.451 The terminal oxygenases are large protein aggregates (MW ) 150-200 kDa) containing either multiples of R subunits (BDO R2, PDO R4) or an equimolar combination of R and â subunits (toluene dioxygenase R2â2, NDO R3â3). The R subunits contain a Rieske [2Fe-2S] cluster and a catalytic non-heme FeII center. â subunits do not seem to be involved in the catalytic function (vide infra). Kinetics. Steady-state kinetic studies coupled with various rapid reaction studies of the partial reactions of PDO allowed Ballou et al. to propose a kinetic scheme (Scheme 15).443 On the basis of steady state 278 Chemical Reviews, 2000, Vol. 100, No. 1 Solomon et al.

3d Transition Metals for C-H Activation.

Abstract: C–H activation has surfaced as an increasingly powerful tool for molecular sciences, with notable applications to material sciences, crop protection, drug discovery, and pharmaceutical industries, among others. Despite major advances, the vast majority of these C–H functionalizations required precious 4d or 5d transition metal catalysts. Given the cost-effective and sustainable nature of earth-abundant first row transition metals, the development of less toxic, inexpensive 3d metal catalysts for C–H activation has gained considerable recent momentum as a significantly more environmentally-benign and economically-attractive alternative. Herein, we provide a comprehensive overview on first row transition metal catalysts for C–H activation until summer 2018.

Aerobic Copper-Catalyzed Organic Reactions

Abstract: The chemistry of copper is extremely rich because it can easily access Cu0, CuI, CuII, and CuIII oxidation states allowing it to act through one-electron or two-electron processes. As a result, both radical pathways and powerful two-electron bond forming pathways via organmetallic intermediates, similar to those of palladium, can occur. In addition, the different oxidation states of copper associate well with a large number of different functional groups via Lewis acid interactions or π-coordination. In total, these feature confer a remarkably broad range of activities allowing copper to catalyze the oxidation and oxidative union of many substrates. Oxygen is a highly atom economical, environmentally benign, and abundant oxidant, which makes it ideal in many ways.1 The high activation energies in the reactions of oxygen require that catalysts be employed.2 In combination with molecular oxygen, the chemistry of copper catalysis increases exponentially since oxygen can act as either a sink for electrons (oxidase activity) and/or as a source of oxygen atoms that are incorporated into the product (oxygenase activity). The oxidation of copper with oxygen is a facile process allowing catalytic turnover in net oxidative processes and ready access to the higher CuIII oxidation state, which enables a range of powerful transformations including two-electron reductive elimination to CuI. Molecular oxygen is also not hampered by toxic byproducts, being either reduced to water, occasionally via H2O2 (oxidase activity) or incorporated into the target structure with high atom economy (oxygenase activity). Such oxidations using oxygen or air (21% oxygen) have been employed safely in numerous commodity chemical continuous and batch processes.3 However, batch reactors employing volatile hydrocarbon solvents require that oxygen concentrations be kept low in the head space (typically <5–11%) to avoid flammable mixtures, which can limit the oxygen concentration in the reaction mixture.4,5,6 A number of alternate approaches have been developed allowing oxidation chemistry to be used safely across a broader array of conditions. For example, use of carbon dioxide instead of nitrogen as a diluent leads to reduced flammability.5 Alternately, water can be added to moderate the flammability allowing even pure oxygen to be employed.6 New reactor designs also allow pure oxygen to be used instead of diluted oxygen by maintaining gas bubbles in the solvent, which greatly improves reaction rates and prevents the build up of higher concentrations of oxygen in the head space.4a,7 Supercritical carbon dioxide has been found to be advantageous as a solvent due its chemical inertness towards oxidizing agents and its complete miscibility with oxygen or air over a wide range of temperatures.8 An number of flow technologies9 including flow reactors,10 capillary flow reactors,11 microchannel/microstructure structure reactors,12 and membrane reactors13 limit the amount of or afford separation of hydrocarbon/oxygen vapor phase thereby reducing the potential for explosions. Enzymatic oxidizing systems based upon copper that exploit the many advantages and unique aspects of copper as a catalyst and oxygen as an oxidant as described in the preceding paragraphs are well known. They represent a powerful set of catalysts able to direct beautiful redox chemistry in a highly site-selective and stereoselective manner on simple as well as highly functionalized molecules. This ability has inspired organic chemists to discover small molecule catalysts that can emulate such processes. In addition, copper has been recognized as a powerful catalyst in several industrial processes (e.g. phenol polymerization, Glaser-Hay alkyne coupling) stimulating the study of the fundamental reaction steps and the organometallic copper intermediates. These studies have inspiried the development of nonenzymatic copper catalysts. For these reasons, the study of copper catalysis using molecular oxygen has undergone explosive growth, from 30 citations per year in the 1980s to over 300 citations per year in the 2000s. A number of elegant reviews on the subject of catalytic copper oxidation chemistry have appeared. Most recently, reviews provide selected coverage of copper catalysts14 or a discussion of their use in the aerobic functionalization of C–H bonds.15 Other recent reviews cover copper and other metal catalysts with a range of oxidants, including oxygen, but several reaction types are not covered.16 Several other works provide a valuable overview of earlier efforts in the field.17 This review comprehensively covers copper catalyzed oxidation chemistry using oxygen as the oxidant up through 2011. Stoichiometric reactions with copper are discussed, as necessary, to put the development of the catalytic processes in context. Mixed metal systems utilizing copper, such as palladium catalyzed Wacker processes, are not included here. Decomposition reactions involving copper/oxygen and model systems of copper enzymes are not discussed exhaustively. To facilitate analysis of the reactions under discussion, the current mechanistic hypothesis is provided for each reaction. As our understanding of the basic chemical steps involving copper improve, it is expected that many of these mechanisms will evolve accordingly.