Utz Roedig

Bio: Utz Roedig is an academic researcher from University College Cork. The author has contributed to research in topics: Wireless sensor network & Key distribution in wireless sensor networks. The author has an hindex of 30, co-authored 166 publications receiving 4072 citations. Previous affiliations of Utz Roedig include Technische Universität Darmstadt & Lancaster University.

Do LoRa Low-Power Wide-Area Networks Scale?

Abstract: New Internet of Things (IoT) technologies such as Long Range (LoRa) are emerging which enable power efficient wireless communication over very long distances. Devices typically communicate directly to a sink node which removes the need of constructing and maintaining a complex multi-hop network. Given the fact that a wide area is covered and that all devices communicate directly to a few sink nodes a large number of nodes have to share the communication medium. LoRa provides for this reason a range of communication options (centre frequency, spreading factor, bandwidth, coding rates) from which a transmitter can choose. Many combination settings are orthogonal and provide simultaneous collision free communications. Nevertheless, there is a limit regarding the number of transmitters a LoRa system can support. In this paper we investigate the capacity limits of LoRa networks. Using experiments we develop models describing LoRa communication behaviour. We use these models to parameterise a LoRa simulation to study scalability. Our experiments show that a typical smart city deployment can support 120 nodes per 3.8 ha, which is not sufficient for future IoT deployments. LoRa networks can scale quite well, however, if they use dynamic communication parameter selection and/or multiple sinks.

LoRa for the Internet of Things

Abstract: New transceiver technologies have emerged which enable power efficient communication over very long distances. Examples of such Low-Power Wide-Area Network (LPWAN) technologies are LoRa, Sigfox and Weightless. A typical application scenario for these technologies is city wide meter reading collection where devices send readings at very low frequency over a long distance to a data concentrator (one-hop networks). We argue that these transceivers are potentially very useful to construct more generic Internet of Things (IoT) networks incorporating multi-hop bidirectional communication enabling sensing and actuation. Furthermore, these transceivers have interesting features not available with more traditional transceivers used for IoT networks which enable construction of novel protocol elements. In this paper we present a performance and capability analysis of a currently available LoRa transceiver. We describe its features and then demonstrate how such transceiver can be put to use efficiently in a wide-area application scenario. In particular we demonstrate how unique features such as concurrent non-destructive transmissions and carrier detection can be employed. Our deployment experiment demonstrates that 6 LoRa nodes can form a network covering 1.5 ha in a built up environment, achieving a potential lifetime of 2 year on 2 AA batteries and delivering data within 5 s and reliability of 80%.

A Survey of MAC Protocols for Mission-Critical Applications in Wireless Sensor Networks

Abstract: Wireless Sensor Networks (WSNs) are generally designed to support applications in long-term deployments, and thus WSN protocols are primarily designed to be energy efficient. However, the research community has recently explored new WSN applications such as industrial process automation. These mission-critical applications demand not only energy efficient operation but also strict data transport performance. In particular, data must be transported to a sink in a timely and reliable fashion. Both WSN's data transport performance and energy consumption pattern are mainly defined by the employed medium access control (MAC) protocol. Therefore, this survey paper explores to what extent existing MAC protocols for WSNs can serve mission-critical applications. The reviewed protocols are classified according to data transport performance and suitability for mission-critical applications. The survey reveals that the existing solutions have a number of limitations and only a few recently developed MAC protocols are suitable for this application domain.

Securing communication in 6LoWPAN with compressed IPsec

Abstract: Real-world deployments of wireless sensor networks (WSNs) require secure communication. It is important that a receiver is able to verify that sensor data was generated by trusted nodes. It may also be necessary to encrypt sensor data in transit. Recently, WSNs and traditional IP networks are more tightly integrated using IPv6 and 6LoWPAN. Available IPv6 protocol stacks can use IPsec to secure data exchange. Thus, it is desirable to extend 6LoWPAN such that IPsec communication with IPv6 nodes is possible. It is beneficial to use IPsec because the existing end-points on the Internet do not need to be modified to communicate securely with the WSN. Moreover, using IPsec, true end-to-end security is implemented and the need for a trustworthy gateway is removed. In this paper we provide End-to-End (E2E) secure communication between IP enabled sensor networks and the traditional Internet. This is the first compressed lightweight design, implementation, and evaluation of 6LoWPAN extension for IPsec. Our extension supports both IPsec's Authentication Header (AH) and Encapsulation Security Payload (ESP). Thus, communication endpoints are able to authenticate, encrypt and check the integrity of messages using standardized and established IPv6 mechanisms.

LoRa Transmission Parameter Selection

Abstract: Low-Power Wide-Area Network (LPWAN) technologies such as Long Range (LoRa) are emerging that enable power efficient wireless communication over very long distances. LPWAN devices typically communicate directly to a sink node which removes the need of constructing and maintaining a complex multi-hop network. However, to ensure efficient and reliable communication LPWAN devices often provide a large number of transmission parameters. For example, a LoRa device can be configured to use different spreading factors, bandwidth settings, coding rates and transmission powers, resulting in over 6720 possible settings. It is a challenge to determine the setting that minimises transmission energy cost while meeting the required communication performance. This paper is the first to present a thorough analysis of the impact of LoRa transmission parameter selection on communication performance. We study in detail the impact of parameter settings on energy consumption and communication reliability. Using this study we develop a link probing regime which enables us to quickly determine transmission settings that satisfy performance requirements. The presented work is a first step towards an automated mechanism for LoRa transmission parameter selection that a deployed LoRa network requires, but is not yet specified within the Long Range Wide Area Network (LoRaWAN) framework.

Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications

Abstract: This paper provides an overview of the Internet of Things (IoT) with emphasis on enabling technologies, protocols, and application issues. The IoT is enabled by the latest developments in RFID, smart sensors, communication technologies, and Internet protocols. The basic premise is to have smart sensors collaborate directly without human involvement to deliver a new class of applications. The current revolution in Internet, mobile, and machine-to-machine (M2M) technologies can be seen as the first phase of the IoT. In the coming years, the IoT is expected to bridge diverse technologies to enable new applications by connecting physical objects together in support of intelligent decision making. This paper starts by providing a horizontal overview of the IoT. Then, we give an overview of some technical details that pertain to the IoT enabling technologies, protocols, and applications. Compared to other survey papers in the field, our objective is to provide a more thorough summary of the most relevant protocols and application issues to enable researchers and application developers to get up to speed quickly on how the different protocols fit together to deliver desired functionalities without having to go through RFCs and the standards specifications. We also provide an overview of some of the key IoT challenges presented in the recent literature and provide a summary of related research work. Moreover, we explore the relation between the IoT and other emerging technologies including big data analytics and cloud and fog computing. We also present the need for better horizontal integration among IoT services. Finally, we present detailed service use-cases to illustrate how the different protocols presented in the paper fit together to deliver desired IoT services.

[서평]「Applied Cryptography」

Abstract: The objective of this paper is to give a comprehensive introduction to applied cryptography with an engineer or computer scientist in mind. The emphasis is on the knowledge needed to create practical systems which supports integrity, confidentiality, or authenticity. Topics covered includes an introduction to the concepts in cryptography, attacks against cryptographic systems, key use and handling, random bit generation, encryption modes, and message authentication codes. Recommendations on algorithms and further reading is given in the end of the paper. This paper should make the reader able to build, understand and evaluate system descriptions and designs based on the cryptographic components described in the paper.

Low Power Wide Area Networks: An Overview

Abstract: Low power wide area (LPWA) networks are attracting a lot of attention primarily because of their ability to offer affordable connectivity to the low-power devices distributed over very large geographical areas. In realizing the vision of the Internet of Things, LPWA technologies complement and sometimes supersede the conventional cellular and short range wireless technologies in performance for various emerging smart city and machine-to-machine applications. This review paper presents the design goals and the techniques, which different LPWA technologies exploit to offer wide-area coverage to low-power devices at the expense of low data rates. We survey several emerging LPWA technologies and the standardization activities carried out by different standards development organizations (e.g., IEEE, IETF, 3GPP, ETSI) as well as the industrial consortia built around individual LPWA technologies (e.g., LoRa Alliance, Weightless-SIG, and Dash7 alliance). We further note that LPWA technologies adopt similar approaches, thus sharing similar limitations and challenges. This paper expands on these research challenges and identifies potential directions to address them. While the proprietary LPWA technologies are already hitting the market with large nationwide roll-outs, this paper encourages an active engagement of the research community in solving problems that will shape the connectivity of tens of billions of devices in the next decade.