scispace - formally typeset
Search or ask a question
Author

V. Damodara Das

Bio: V. Damodara Das is an academic researcher from Indian Institute of Technology Madras. The author has contributed to research in topics: Thin film & Electrical resistivity and conductivity. The author has an hindex of 20, co-authored 89 publications receiving 1145 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: The electrical resistivity and the Seebeck coefficient of thermally evaporated thin bismuth films of thicknesses from 300 to 1900 A\r{} have been measured and the latter is negative and its magnitude is found to increase initially with increasing temperature, reach a maximum, and then decrease with a further rise in temperature.
Abstract: The electrical resistivity and the Seebeck coefficient of thermally evaporated thin bismuth films of thicknesses from 300 to 1900 A\r{} have been measured in the temperature range 300--470 K. The latter is negative and its magnitude is found to increase initially with increasing temperature, reach a maximum, and then decrease with a further rise in temperature. The temperature at which the Seebeck coefficient is maximum is found to be thickness dependent, decreasing with increasing thickness. The observed dependence is explained by considering that the Fermi energy is temperature dependent. Bismuth films show a negative temperature coefficient of resistivity. The thickness dependence of the electrical resistivity and the Seebeck coefficient of simultaneously prepared films are analyzed using the newer effective mean-free-path model. From the analysis, important material constants like the mean free path, the electron concentration, and the effective mass of electrons have been evaluated.

69 citations

Journal ArticleDOI
TL;DR: In this paper, optical absorption data, optical band gap and the nature of the forbidden energy gap in the indium oxide thin films have been determined by measuring their optical absorbance as a function of wavelength.
Abstract: Indium oxide thin films have been prepared by thermal oxidation of vacuum‐deposited indium thin films in air in an open furnace at about 600 K. These indium oxide thin films prepared by thermal oxidation have been examined for optical transparency by measuring their optical absorbance as a function of wavelength. From the optical absorption data, optical band gap and the nature of the forbidden energy gap in the indium oxide thin films have been determined. Electrical conductivity measurements have also been carried out on the above oxide films as a function of temperature during heating and cooling cycles in vacuum. It is found that after the first heating, electrical conductivity increases to a significant extent due to removal of point defect clusters due to annealing which contribute to both carrier generation and scattering. From the thermoelectric power measurements carried out, it has been concluded that electrons are the majority carriers in these indium oxide thin films.

64 citations

Journal ArticleDOI
TL;DR: In this paper, the results of electrical conductivity and thermoelectric studies on antimony telluride in the thin film state were reported, where vacuum-deposited on to clean glass substrates with thickness between 50 and 200 nm and studied in the temperature interval 300 to 470 K. This is attributed to an amorphous to crystalline transition, which is confirmed by X-ray diffractogram and electron diffraction patterns.
Abstract: The results of electrical conductivity and thermoelectric studies on antimony telluride, a promising thermoelectric material, in the thin film state are reported. Films were vacuum-deposited on to clean glass substrates with thickness between 50 and 200 nm and studied in the temperature interval 300 to 470 K. On heating the as-grown films, there is a sharp fall both in the Seebeck coefficient and the electrical resistivity at around 340 to 370 K for all the films. This is attributed to an amorphous to crystalline transition, which is confirmed by X-ray diffractogram and electron diffraction patterns.[/p]

45 citations

Journal ArticleDOI
TL;DR: In this article, the size dependence of thermoelectric power and electrical resistivity have been analyzed by the effective mean free path model of size effect, and it is found that both the thermoeellectric powers and the electrical resistivities are linear functions of the reciprocal of thickness of the films.
Abstract: Crystalline Sb2Te3 thin films of different thicknesses have been prepared by subsequent annealing (at 500 K) of vacuum deposited, as‐grown, amorphous thin films of Sb2Te3 prepared on glass substrates at room temperature. Thermoelectric power and electrical resistivity of these annealed (crystalline) films have been determined as a function of temperature. The size dependence of thermoelectric power and electrical resistivity have been analyzed by the effective mean free path model of size effect. It is found that both the thermoelectric power and the electrical resistivity are linear functions of the reciprocal of thickness of the films. The data from the analyses of thermoelectric power and electrical resistivity have been combined to evaluate important material parameters such as carrier concentration, their mean free path, Fermi energy, and effective mass. The values of some of these are compared with the previous available values from literature.

42 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, basic knowledge of thermoelectric materials and an overview of parameters that affect the figure of merit ZT are provided, as well as the prospects for the optimization and their applications are also discussed.
Abstract: Developing thermoelectric materials with superior performance means tailoring interrelated thermoelectric physical parameters – electrical conductivities, Seebeck coefficients, and thermal conductivities – for a crystalline system. High electrical conductivity, low thermal conductivity, and a high Seebeck coefficient are desirable for thermoelectric materials. Therefore, knowledge of the relation between electrical conductivity and thermal conductivity is essential to improve thermoelectric properties. In general, research in recent years has focused on developing thermoelectric structures and materials of high efficiency. The importance of this parameter is universally recognized; it is an established, ubiquitous, routinely used tool for material, device, equipment and process characterization both in the thermoelectric industry and in research. In this paper, basic knowledge of thermoelectric materials and an overview of parameters that affect the figure of merit ZT are provided. The prospects for the optimization of thermoelectric materials and their applications are also discussed.

663 citations

Journal ArticleDOI
25 Jul 1996-Nature
TL;DR: In this article, the primordial fireball was simulated using a neutron-induced nuclear reaction to heat small regions of liquid 3He above the superfluid transition temperature, leading to the formation of a random network of vortices (the superfluid analogue of cosmic strings).
Abstract: TOPOLOGICAL defects formed during a rapid symmetry-breaking phase transition in the early Universe1,2 could be responsible for seeding large-scale structure, for the anisotropy of the microwave background radiation, and for the predominance of matter over antimatter3,4. The theory describing this cosmological phase transition is formally analogous to that describing the transition to the superfluid state in liquid 3He, so that in principle the process of cosmological defect formation can be modelled in the laboratory. Here we report the results of an experiment in which the 'primordial fireball' is mimicked using a neutron-induced nuclear reaction (n + 3He → p + 3He + 0.76 MeV) to heat small regions of superfluid 3He above the superfluid transition temperature. These bubbles of normal liquid cool extremely rapidly, and we find that their transition back to the superfluid state is accompanied by the formation of a random network of vortices (the superfluid analogue of cosmic strings). We monitor the evolution of this defect state by rotating the superfluid sample, allowing vortices to escape from the network and thus be probed individually. Our results provide clear confirmation of the idea that topological defects form at a rapid second-order phase transition, and give quantitative support to the Kibble–Zurek mechanism5,6 of cosmological defect formation.

411 citations

Journal ArticleDOI
TL;DR: In this article, the authors characterized the optical absorption properties of Ge2Sb2Te5 in its amorphous, face-centered-cubic, and hexagonal phases, and explained the origins of inconsistent or unphysical results in previous reports.
Abstract: Ge–Sb–Te alloys are widely used for data recording based on the rapid and reversible amorphous-to-crystalline phase transformation that is accompanied by increases in the optical reflectivity and the electrical conductivity. However, uncertainties about the optical band gaps and electronic transport properties of these phases have persisted because of inappropriate interpretation of reported data and the lack of definitive analytical studies. In this paper we characterize the most widely used composition, Ge2Sb2Te5, in its amorphous, face-centered-cubic, and hexagonal phases, and explain the origins of inconsistent or unphysical results in previous reports. The optical absorption in all of these phases follows the relationship αhν∝(hν−Egopt)2, which corresponds to the optical transitions in most amorphous semiconductors as proposed by Tauc, Grigorovici, and Vancu [Tauc et al., Phys. Status Solidi 15, 627 (1966)], and to those in indirect-gap crystalline semiconductors. The optical band gaps of the amorpho...

387 citations

Journal ArticleDOI
TL;DR: In this review, the current progress on ink formulation of two-dimensional materials and the printable applications enabled by them are summarized and perspectives on their research and technological future prospects are presented.
Abstract: Graphene and related two-dimensional materials provide an ideal platform for next generation disruptive technologies and applications. Exploiting these solution-processed two-dimensional materials in printing can accelerate this development by allowing additive patterning on both rigid and conformable substrates for flexible device design and large-scale, high-speed, cost-effective manufacturing. In this review, we summarise the current progress on ink formulation of two-dimensional materials and the printable applications enabled by them. We also present our perspectives on their research and technological future prospects.

371 citations

Journal ArticleDOI
TL;DR: Analysis of ferromagnetic resonance data shows that high particle concentrations correlate with increasing chain length producing decreasing SLP, and a theoretical model describing dipole interactions valid for the linear response regime is proposed, predicting optimum particle sizes for hyperthermia to about 30% smaller than those previously predicted, depending on the nanoparticle parameters and chain size.
Abstract: Nanostructured magnetic systems have many applications, including potential use in cancer therapy deriving from their ability to heat in alternating magnetic fields. In this work we explore the influence of particle chain formation on the normalized heating properties, or specific loss power (SLP) of both low- (spherical) and high- (parallelepiped) anisotropy ferrite-based magnetic fluids. Analysis of ferromagnetic resonance (FMR) data shows that high particle concentrations correlate with increasing chain length producing decreasing SLP. Monte Carlo simulations corroborate the FMR results. We propose a theoretical model describing dipole interactions valid for the linear response regime to explain the observed trends. This model predicts optimum particle sizes for hyperthermia to about 30% smaller than those previously predicted, depending on the nanoparticle parameters and chain size. Also, optimum chain lengths depended on nanoparticle surface-to-surface distance. Our results might have important implications to cancer treatment and could motivate new strategies to optimize magnetic hyperthermia.

323 citations