scispace - formally typeset
Search or ask a question
Author

V. Mahadevan

Bio: V. Mahadevan is an academic researcher from Indian Institute of Technology Madras. The author has contributed to research in topics: Polymerization & Acrylonitrile. The author has an hindex of 10, co-authored 41 publications receiving 278 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the synthesis of new copolymers containing amino and heterocyclic ligands and their use for anchoring Pd and Rh species is described, and the supported catalysts are effective for the hydrogenation of alkenes, dienes, alkynes, and nitrobenzene under very mild conditions.
Abstract: The synthesis of new copolymers containing amino and heterocyclic ligands and their use for anchoring Pd and Rh species is described. The supported catalysts are effective for the hydrogenation of alkenes, dienes, alkynes, and nitrobenzene under very mild conditions. The catalysts have been characterized by chemical analysis, particle size measurement, IR, and x-ray photoelectron spectroscopy. Relative reactivities and the effects of substrate structure, solvents, catalyst loading, anchoring ligands, metal species, and particle size on the rates of hydrogenation have been determined using a wide variety of substrates. The kinetics of hydrogenation have been analyzed using concepts suitable under slurry reaction conditions. Comparisons between different oxidation states of the same metal and between different metal species have also been made. The recycling efficiencies of the catalysts have been determined and found to be very good. © 1997 John Wiley & Sons, Inc.

32 citations

Journal ArticleDOI
TL;DR: In this paper, a mechanism involving the formation of a complex between Mn3 and malonic acid whose decomposition yields the initiating free radical with the polymerisation being terminated by mutual interaction of growing radicals has been suggested.
Abstract: Kinetics of vinyl polymerisation initiated by the redox system malonic acid/Mn3⊕ have been investigated in the temperature range of 5-15°C in sulphuric acid and perchloric acid media for acrylonitrile and methyl methacrylate. A mechanism involving the formation of a complex between Mn3⊕ and malonic acid whose decomposition yields the initiating free radical with the polymerisation being terminated by mutual interaction of growing radicals has been suggested. Es wurde die Reaktionskinetik der durch das Redoxsystem Malonsaure/Mn3⊕ initiierten Vinylpolymerisation von Acrylnitril und Methylmethacrylat im schwefelsauren und perchlorsauren Medium im Temperaturbereich von 5-15°C untersucht. Es wird ein Mechanismus vorgeschlagen, welcher die Bildung eines Komplexes zwischen Mn3⊕ und Malonsaure vorsieht. In dem vorgeschlagenen Mechanismus wird das Startradikal durch Zerfall des Komplexes gebildet, und die Abbruchreaktion erfolgt durch eine Radikalkettenabbruchsreaktion der wachsenden Polymerketten.

28 citations

Journal ArticleDOI
TL;DR: In this article, the synthesis of new hydrogel polymers based on 2-hydroxyethyl methacrylate and other functional monomers is described, which are useful for anchoring palladium and rhodium species.

12 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, the chemistry, types, and synthesis of polyurethanes (PUs) are discussed, with a specific emphasis on their recyclability and recoverability, and information is provided on the environmental friendliness of the PU.
Abstract: Polyurethanes (PUs) are a class of versatile materials with great potential for use in different applications, especially based on their structure–property relationships. Their specific mechanical, physical, biological, and chemical properties are attracting significant research attention to tailoring PUs for use in different applications. Enhancement of the properties and performance of PU-based materials may be achieved through changes to the production process or the raw materials used in their fabrication or via the use of advanced characterization techniques. Clearly, modification of the raw materials and production process through proper methods can produce PUs that are suitable for varied specific applications. The present study aims to shed light on the chemistry, types, and synthesis of different kinds of PUs. Some of the important research studies relating to PUs, including their synthesis method, characterization techniques, and research findings, are comprehensively discussed. Herein, recent advances in new types of PUs and their synthesis for various applications are also presented. Furthermore, information is provided on the environmental friendliness of the PUs, with a specific emphasis on their recyclability and recoverability.

861 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe the application of dendrimer-encapsulated Pd nanoparticles to fluorous biphasic catalysis, and demonstrate that the resulting nanocomposites are preferentially soluble in fluorinated hydrocarbons.
Abstract: Here we describe the application of dendrimer-encapsulated Pd nanoparticles to fluorous biphasic catalysis. 1 Complexation of Pd/dendrimer composites with perfluorinated carboxylic acids renders the resulting nanocomposites preferentially soluble in fluorinated hydrocarbons. These new catalysts show high activity and selectivity for biphasic hydrogenation of alkenes and conjugated dienes. Moreover, the catalysts can easily be recovered and used for multiple reactions. Reactions in biphasic fluorous/organic systems were suggested by Horvath and Rabai in 1994 2 to facilitate recovery and recycling of soluble catalysts. The general approach to biphasic catalysis is illustrated in Scheme 1. 3 The system consists of organic and fluorous layers. The catalyst is selectively soluble in the fluorous phase, while the reactants are preferentially soluble in the organic solvent. Stirring, sonicating, and/or heating of the mixture leads to formation of a fine emulsion and partial homogenization (with some solvents, complete homogenization is obtained at elevated temperatures), and the catalytic reaction proceeds at the interface between the two liquids. When the reaction is over, the liquid phases are separated, the product is isolated from the organic phase, and the catalyst-containing fluorous layer is recycled. Such easy separation and recycling are particularly attractive in terms of “green chemistry”, and a number of fluorous phase-soluble catalysts have been reported in the literature, including some based on metal complexes. 4,5 Preparation of fluorous phase-soluble metal nanoparticles, however, has not previously been reported. Catalytic properties of metal nanoparticles have been explored since the pioneering studies of Rampino and Nord in the early 1940s. 6 Over the past decade research in this area intensified, 7

229 citations

Journal ArticleDOI
TL;DR: The chiral stationary phase for high-performance liquid chromatography showed good chiral recognition ability towards various racemates, including Cu(acac)2, but not as well as in the phase for low-performance materials like Palladium.
Abstract: 2.6. Microencapsulated Cu(acac)2 [MC Cu(acac)2] 606 2.7. Microencapsulated Palladium [MC Pd] 607 2.8. Microencapsulated Methathesis Catalyst 609 3. Polymer Incarcerated Catalysts 611 3.1. Polymer Incarcerated Palladium [PI Pd] 611 3.2. Polymer-Micelle Incarcerated (PMI) Palladium 617 3.3. Polymer Incarcerated Ruthenium Catalyst 619 3.4. Polymer-Micelle Incarcerated Scandium Trifluoromethanesulfonate [PMI Sc(OTf)3] and Ruthenium Catalyst [PMI Ru] 621

205 citations

Book ChapterDOI
Richard M. Crooks1, Buford I. Lemon1, Li Sun1, Lee K. Yeung1, Mingqi Zhao1 
01 Jan 2001
TL;DR: This chapter describes composite materials composed of dendrimers and metals or semiconductors, which are useful for a range of catalytic applications including hydrogenations and Heck chemistry.
Abstract: This chapter describes composite materials composed of dendrimers and metals or semiconductors. Three types of dendrimer/metal-ion composites are discussed: dendrimers containing structural metal ions, nonstructural exterior metal ions, and nonstructural interior metal ions. Nonstructural interior metal ions can be reduced to yield dendrimer-encapsulated metal and semiconductor nanoparticles. These materials are the principal focus of this chapter. Poly(amidoamine) (PAMAM) and poly(propylene imine) dendrimers, which are the two commercially available families of dendrimers, are in many cases monodisperse in size. Accordingly, they have a generation-dependent number of interior tertiary amines. These are able to complex a range of metal ions including Cu2+, Pd2+, and Pt2+. The maximum number of metal ions that can be sorbed within the dendrimer interior depends on the metal ion, the dendrimer type, and the dendrimer generation. For example, a generation six PAMAM dendrimer can contain up to 64 Cu2+ ions. Nonstructural interior ions can be chemically reduced to yield dendrimer-encapsulated metal nanoparticles. Because each dendrimer contains a specific number of ions, the resulting metal nanoparticles are in many cases of nearly monodisperse size. Nanoparticles within dendrimers are stabilized by the dendrimer framework; that is, the dendrimer first acts as a molecular template to prepare the metal nanoparticles and then as a stabilizer to prevent agglomeration. These composites are useful for a range of catalytic applications including hydrogenations and Heck chemistry. The unique properties of the interior dendrimer microenvironment can result in formation of products not observed in the absence of the dendrimer. Moreover the exterior dendrimer branches act as a selective gate that controls access to the interior nanoparticle, which results in selective catalysis. In addition to single-metal nanoparticles, it is also possible to prepare bimetallic nanoclusters and dendrimer-encapsulated semiconductor nanoparticles, such as CdS, using this same general approach.

201 citations

Journal ArticleDOI
TL;DR: In this article, the second-order rate constant for the reaction of chlorauric acid with pyrrole in dilute solution was found to he 13 M -1 s -1.
Abstract: Composite colloids of gold and polypyrrole were prepared using two different methods: 1, using pyrrole colloid, created by the oxidation of pyrrole by ferric chloride, to subsequently reduce chlorauric acid and, 2, oxidizing pyrrole monomer with chlorauric acid in a sodium dodecylbenzene sulfonate solution. In each case, the polypyrrole colloid consisted of irregularly shaped particles approximately 500 nm in diameter. The gold produced in each case was in the form of irregular spheres, approximately 407 nm in diameter in method 1 and 13 nm in method 2. X-ray photoelectron spectroscopy was used to determine the oxidation state of the species present. Transmission electron microscopy and light scattering data were used to determine the particle sizes of both gold and polypyrrole colloids. Energy dispersed spectrum X-ray analysis and electron diffraction were used to confirm the presence of metallic gold in the composite colloids. The second-order rate constant for the reaction of chlorauric acid with pyrrole in dilute solution was found to he 13 M -1 s -1 . Aqueous solutions of palladium, platinum, rhodium, cobalt, tin, silver, zinc, nickel, titanium, cadmium, mercury, arsenic, and selenium were also examined for their potential to act as oxidants to produce composite polypyrrole colloids. Palladium, platinum, and rhodium salts were suitable oxidants, producing polypyrrole in less than 12 h.

195 citations