Vahid Joekar-Niasar

Bio: Vahid Joekar-Niasar is an academic researcher from University of Manchester. The author has contributed to research in topics: Porous medium & Capillary pressure. The author has an hindex of 24, co-authored 47 publications receiving 2171 citations. Previous affiliations of Vahid Joekar-Niasar include Royal Dutch Shell & Utrecht University.

Analysis of Fundamentals of Two-Phase Flow in Porous Media Using Dynamic Pore-Network Models: A Review

Abstract: In this literature survey, different aspects of dynamics of two-phase flow in porous media are discussed. This review is based on the results of developed dynamic pore-network models and their applications. Thus, those concepts of dynamics of two-phase systems are addressed that have been already discussed in previous studies. Since it is not always possible to study different aspects of laboratory experiments, dynamic pore-network models were developed to gain new insights into the process. This characteristic is the major advantage of pore-network models, which give a better understanding of the physics of a process at pore scale as well as at the scale of representative elementary volume. Dynamic pore-network models are reviewed under different classifications; structure, computational algorithm, and local rules and applications.

Non-equilibrium effects in capillarity and interfacial area in two-phase flow: dynamic pore-network modelling

Abstract: Current macroscopic theories of two-phase flow in porous media are based on the extended Darcy's law and an algebraic relationship between capillary pressure and saturation. Both of these equations have been challenged in recent years, primarily based on theoretical works using a thermodynamic approach, which have led to new governing equations for two-phase flow in porous media. In these equations, new terms appear related to the fluid–fluid interfacial area and non-equilibrium capillarity effects. Although there has been a growing number of experimental works aimed at investigating the new equations, a full study of their significance has been difficult as some quantities are hard to measure and experiments are costly and time-consuming. In this regard, pore-scale computational tools can play a valuable role. In this paper, we develop a new dynamic pore-network simulator for two-phase flow in porous media, called DYPOSIT. Using this tool, we investigate macroscopic relationships among average capillary pressure, average phase pressures, saturation and specific interfacial area. We provide evidence that at macroscale, average capillary pressure–saturation–interfacial area points fall on a single surface regardless of flow conditions and fluid properties. We demonstrate that the traditional capillary pressure–saturation relationship is not valid under dynamic conditions, as predicted by the theory. Instead, one has to employ the non-equilibrium capillary theory, according to which the fluids pressure difference is a function of the time rate of saturation change. We study the behaviour of non-equilibrium capillarity coefficient, specific interfacial area, and its production rate versus saturation and viscosity ratio.A major feature of our pore-network model is a new computational algorithm, which considers capillary diffusion. Pressure field is calculated for each fluid separately, and saturation is computed in a semi-implicit way. This provides more numerical stability, compared with previous models, especially for unfavourable viscosity ratios and small capillary number values.

Insights into the Relationships Among Capillary Pressure, Saturation, Interfacial Area and Relative Permeability Using Pore-Network Modeling

Abstract: To gain insight in relationships among capillary pressure, interfacial area, saturation, and relative permeability in two-phase flow in porous media, we have developed two types of pore-network models. The first one, called tube model, has only one element type, namely pore throats. The second one is a sphere-and-tube model with both pore bodies and pore throats. We have shown that the two models produce distinctly different curves for capillary pressure and relative permeability. In particular, we find that the tube model cannot reproduce hysteresis. We have investigated some basic issues such as effect of network size, network dimension, and different trapping assumptions in the two networks. We have also obtained curves of fluid–fluid interfacial area versus saturation. We show that the trend of relationship between interfacial area and saturation is largely influenced by trapping assumptions. Through simulating primary and scanning drainage and imbibition cycles, we have generated two surfaces fitted to capillary pressure, saturation, and interfacial area (P c –S w –a nw ) points as well as to relative permeability, saturation, and interfacial area (k r –S w –a nw ) points. The two fitted three-dimensional surfaces show very good correlation with the data points. We have fitted two different surfaces to P c –S w –a nw points for drainage and imbibition separately. The two surfaces do not completely coincide. But, their mean absolute difference decreases with increasing overlap in the statistical distributions of pore bodies and pore throats. We have shown that interfacial area can be considered as an essential variable for diminishing or eliminating the hysteresis observed in capillary pressure–saturation (P c –S w ) and the relative permeability–saturation (k r –S w ) curves.

Kinetics of Low-Salinity-Flooding Effect

Abstract: Low-salinity waterflooding (LSF) is one of the least-understood enhanced-oil-recovery (EOR)/improved-oil-recovery (IOR) methods, and proper understanding of the mechanism(s) leading to oil recovery in this process is needed. However, the intrinsic complexity of the process makes fundamental understanding of the underlying mechanism(s) and the interpretation of laboratory experiments difficult. Therefore, we use a model system for sandstone rock of reduced complexity that consists of clay minerals (Na-montmorillonite) deposited on a glass substrate and covered with crude-oil droplets and in which different effects can be separated to increase our fundamental understanding. We focus particularly on the kinetics of oil detachment when exposed to lowsalinity (LS) brine. The system is equilibrated first under high-salinity (HS) brine and then exposed to brines of varying (lower) salinity while the shape of the oil droplets is continuously monitored at high resolution, allowing for a detailed analysis of the contact angle and the contact area as a function of time. It is observed that the contact angle and contact area of oil with the substrate reach a stable equilibrium at HS brine and show a clear response to the LS brine toward less-oil-wetting conditions and ultimately detachment from the clay substrate. This behavior is characterized by the motion of the three-phase (oil/water/solid) contact line that is initially pinned by clay particles at HS conditions, and pinning decreases upon exposure to LS brine. This leads to a decrease in contact area and contact angle that indicates wettability alteration toward a more-waterwet state. When the contact angle reaches a critical value at approximately 40 to 50 , oil starts to detach from the clay. During detachment, most of the oil is released, but in some cases a small amount of oil residue is left behind on the clay substrate. Our results for different salinity levels indicate that the kinetics of this wettability change correlates with a simple buoyancyover adhesion-force balance and has a time constant of hours to days (i.e., it takes longer than commonly assumed). The unexpectedly long time constant, longer than expected by diffusion alone, is compatible with an electrokinetic ion-transport model (Nernst-Planck equation) in the thin water film between oil and clay. Alternatively, one could explain the observations only by more-specific [nonDerjaguin–Landau–Verwey–Overbeek (DLVO) type] interactions between oil and clay such as cation-bridging, direct chemical bonds, or acid/base effects that tend to pin the contact line. The findings provide new insights into the (sub) pore-scale mechanism of LSF, and one can use them as the basis for upscaling to, for example, pore-network scale and higher scales (e.g., core scale) to assess the impact of the slow kinetics on the time scale of an LSF response on macroscopic scales.

Insights into the Impact of Temperature on the Wettability Alteration by Low Salinity in Carbonate Rocks

Abstract: It has been proposed that increased oil recovery in carbonates by modification of ionic composition or altering salinity occurs mainly at a temperature exceeding 70–80 °C. The argument was that elevated temperatures enhance adsorption of the potential determining ions which then modifies wettability to a less-oil-wetting state. According to this rationale, it becomes questionable if diluted brines or brines without these ions can be still applicable. Therefore, the aim of this paper is to investigate if the wettability alteration truly depends on temperature and if so how the trend with temperature can be explained. We followed a combined experimental and theoretical modeling approach. The effect of brine composition and temperature on carbonate wettability was probed by monitoring contact angle change of sessile oil droplets upon switching from high salinity to lower salinity brines. IFT measurements as a function of salinity and temperature along with extensive ζ-potential measurements as a function of ...

Effect of Temperature

Abstract: A positive temperature coefficient is the term which has been used to indicate that an increase in solubility occurs as the temperature is raised, whereas a negative coefficient indicates a decrease in solubility with rise in temperature.

Steric effects in the dynamics of electrolytes at large applied voltages: I. Double-layer charging

Abstract: The classical Poisson-Boltzmann (PB) theory of electrolytes assumes a dilute solution of point charges with mean-field electrostatic forces. Even for very dilute solutions, however, it predicts absurdly large ion concentrations (exceeding close packing) for surface potentials of only a few tenths of a volt, which are often exceeded, e.g. in microfluidic pumps and electrochemical sensors. Since the 1950s, several modifications of the PB equation have been proposed to account for the finite size of ions in equilibrium, but in this two-part series, we consider steric effects on diffuse charge dynamics (in the absence of electro-osmotic flow). In this first part, we review the literature and analyze two simple models for the charging of a thin double layer, which must form a condensed layer of close-packed ions near the surface at high voltage. A surprising prediction is that the differential capacitance typically varies non-monotonically with the applied voltage, and thus so does the response time of an electrolytic system. In PB theory, the capacitance blows up exponentially with voltage, but steric effects actually cause it to decrease above a threshold voltage where ions become crowded near the surface. Other nonlinear effects in PB theory are also strongly suppressed by steric effects: The net salt adsorption by the double layers in response to the applied voltage is greatly reduced, and so is the tangential "surface conduction" in the diffuse layer, to the point that it can often be neglected compared to bulk conduction (small Dukhin number).

Reactive transport codes for subsurface environmental simulation

Abstract: A general description of the mathematical and numerical formulations used in modern numerical reactive transport codes relevant for subsurface environmental simulations is presented. The formulations are followed by short descriptions of commonly used and available subsurface simulators that consider continuum representations of flow, transport, and reactions in porous media. These formulations are applicable to most of the subsurface environmental benchmark problems included in this special issue. The list of codes described briefly here includes PHREEQC, HPx, PHT3D, OpenGeoSys (OGS), HYTEC, ORCHESTRA, TOUGHREACT, eSTOMP, HYDROGEOCHEM, CrunchFlow, MIN3P, and PFLOTRAN. The descriptions include a high-level list of capabilities for each of the codes, along with a selective list of applications that highlight their capabilities and historical development.

Generalized Modeling of Spontaneous Imbibition Based on Hagen− Poiseuille Flow in Tortuous Capillaries with Variably Shaped Apertures

Abstract: Spontaneous imbibition of wetting liquids in porous media is a ubiquitous natural phenomenon which has received much attention in a wide variety of fields over several decades. Many traditional and recently presented capillary-driven flow models are derived based on Hagen–Poiseuille (H–P) flow in cylindrical capillaries. However, some limitations of these models have motivated modifications by taking into account different geometrical factors. In this work, a more generalized spontaneous imbibition model is developed by considering the different sizes and shapes of pores, the tortuosity of imbibition streamlines in random porous media, and the initial wetting-phase saturation. The interrelationships of accumulated imbibition weight, imbibition rate and gas recovery and the properties of the porous media, wetting liquids, and their interactions are derived analytically. A theoretical analysis and comparison denote that the presented equations can generalize several traditional and newly developed models fr...

Water management in Iran: what is causing the looming crisis?

Abstract: Despite having a more advanced water management system than most Middle Eastern countries, similar to the other countries in the region, Iran is experiencing a serious water crisis. The government blames the current crisis on the changing climate, frequent droughts, and international sanctions, believing that water shortages are periodic. However, the dramatic water security issues of Iran are rooted in decades of disintegrated planning and managerial myopia. Iran has suffered from a symptom-based management paradigm, which mainly focuses on curing the problem symptoms rather than addressing the main causes. This paper reviews the current status of water resources in Iran and recognizes three major causes for the current water crisis: (1) rapid population growth and inappropriate spatial population distribution; (2) inefficient agriculture sector; and (3) mismanagement and thirst for development. The country is faced with serious challenges in the water sector, including but not limited to rising water demand and shortage, declining groundwater levels, deteriorating water quality, and increasing ecosystem losses. If immediate actions are not taken to address these issues, the situation could become more tragic in the near future. The paper suggests some crisis exit strategies that need to be immediately adopted to secure sustainable water resources, if Iran does not want to lose its international reputation for significant success in water resources management over thousands of years in an arid area of the world.