W.H. Azmi

Bio: W.H. Azmi is an academic researcher from Universiti Malaysia Pahang. The author has contributed to research in topics: Nanofluid & Heat transfer. The author has an hindex of 42, co-authored 142 publications receiving 4328 citations.

The Enhancement of Effective Thermal Conductivity and Effective Dynamic Viscosity of Nanofluids – A Review

Abstract: The determination of thermo-physical properties and especially thermal conductivity and viscosity were important for evaluating heat transfer coefficients either for single or two phase flow. The thermo-physical properties measurements and heat transfer observations were mostly obtained with nanoparticles above 10 nm. Various researchers measured and modelled for the determination of thermal conductivity and viscosity of nanofluids. Most of the investigators developed equations for the estimation of thermal conductivity and viscosity as a function of percentage volume concentration, temperature and sometimes with the consideration of particle size valid in their experimental range. Nanofluids are considered to have great potential for heat transfer enhancement and are applied in heat transfer processes. Many studies were carried out to investigate this phenomenon. The main aim of this study is to give a comprehensive review on the research progress on the enhancement of effective thermal conductivity and effective dynamic viscosity of nanofluids.

A Benchmark Study on the Thermal Conductivity of Nanofluids

Abstract: This article reports on the International Nanofluid Property Benchmark Exercise, or INPBE, in which the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or “nanofluids,” was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady-state methods, and optical methods. The nanofluids tested in the exercise were comprised of aqueous and nonaqueous basefluids, metal and metal oxide particles, near-spherical and elongated particles, at low and high particle concentrations. The data analysis reveals that the data from most organizations lie within a relatively narrow band (±10% or less) about the sample average with only few outliers. The thermal conductivity of the nanofluids was found to increase with particle concentration and aspect ratio, as expected from classical theory. There are (small) systematic differences in the absolute values of the nanofluid thermal conductivity among the various experimental approaches; however, such differences tend to disappear when the data are normalized to the measured thermal conductivity of the basefluid. The effective medium theory developed for dispersed particles by Maxwell in 1881 and recently generalized by Nan et al. [J. Appl. Phys. 81, 6692 (1997)], was found to be in good agreement with the experimental data, suggesting that no anomalous enhancement of thermal conductivity was achieved in the nanofluids tested in this exercise.

Principles Of Enhanced Heat Transfer

Abstract: Thank you very much for reading principles of enhanced heat transfer. As you may know, people have look numerous times for their chosen books like this principles of enhanced heat transfer, but end up in malicious downloads. Rather than reading a good book with a cup of coffee in the afternoon, instead they are facing with some infectious bugs inside their desktop computer. principles of enhanced heat transfer is available in our book collection an online access to it is set as public so you can get it instantly. Our books collection spans in multiple locations, allowing you to get the most less latency time to download any of our books like this one. Merely said, the principles of enhanced heat transfer is universally compatible with any devices to read.

Potential of solar energy in developing countries for reducing energy-related emissions

Abstract: The growing global demand for energy from fossil fuels plays a key role in the upward trend in greenhouse gas (GHG) emissions and air pollutants. Rapid population growth and increasing energy demand in the developing countries have brought many concerns such as poverty, pollution, health and environmental problems. While for these countries, particularly the poorest ones, modern energy is necessary to stimulate production, income generation and social development plus reduce the serious health issues that are caused by the use of fuelwood, charcoal, animal dung and agricultural waste. Solar energy is the best answer to energy poverty and it can provide excellent opportunities for reduction of GHG emissions and indoor air pollution through substituting kerosene for lighting and firewood for cooking. Solar photovoltaic (PV) can be an appropriate technology for a source of renewable electricity in developing nations especially in remote rural areas where grid extensions are financially or technically not viable. PV can also be used to reduce demand for fossil fuels and associated emissions, including carbon dioxide (CO2), nitrogen oxides (NOx) and sulfur dioxide (SO2). The use of PV systems can reduce 69–100 million tons of CO2, 126,000–184,000 t of SO2 and 68,000–99,000 t of NOx by 2030. In case countries use concentrating solar power (CSP) systems, each square meter of concentrator surface is enough to save about 200–300 kg (kg) of CO2 emissions annually. Although there are excellent renewable opportunities in many developing countries, several key barriers have prevented large-scale deployment of solar energy technologies in these countries. This study reviews the sources of energy-related emissions, risks of climate change, global solar energy potential, sustainability indicators of renewable energies, environmental impacts of fossil fuels and renewable energies, benefits of solar energy utilization. It also discusses barriers to widespread use of solar energy.