Wai Kin Chan

Bio: Wai Kin Chan is an academic researcher from University of Hong Kong. The author has contributed to research in topics: Nanorod & Rhenium. The author has an hindex of 45, co-authored 180 publications receiving 6884 citations.

Metallated conjugated polymers as a new avenue towards high-efficiency polymer solar cells

Abstract: Bulk heterojunction solar cells have been extensively studied owing to their great potential for cost-effective photovoltaic devices. Although recent advances resulted in the fabrication of poly(3-hexylthiophene) (P3HT)/fullerene derivative based solar cells with efficiencies in the range 4.4-5.0%, theoretical calculations predict that the development of novel donor materials with a lower bandgap is required to exceed the power-conversion efficiency of 10%. However, all of the lower bandgap polymers developed so far have failed to reach the efficiency of P3HT-based cells. To address this issue, we synthesized a soluble, intensely coloured platinum metallopolyyne with a low bandgap of 1.85 eV. The solar cells, containing metallopolyyne/fullerene derivative blends as the photoactive material, showed a power-conversion efficiency with an average of 4.1%, without annealing or the use of spacer layers needed to achieve comparable efficiency with P3HT. This clearly demonstrates the potential of metallated conjugated polymers for efficient photovoltaic devices.

Mechanisms of Antibacterial Activity of MgO: Non‐ROS Mediated Toxicity of MgO Nanoparticles Towards Escherichia coli

Abstract: The toxicity of metal oxide nanomaterials and their antimicrobial activity is attracting increasing attention Among these materials, MgO is particularly interesting as a low cost, environmentally-friendly material The toxicity of MgO, similar to other metal oxide nanomaterials, is commonly attributed to the production of reactive oxygen species (ROS) We investigated the toxicity of three different MgO nanoparticle samples, and clearly demonstrated robust toxicity towards Escherichia coli bacterial cells in the absence of ROS production for two MgO nanoparticle samples Proteomics data also clearly demonstrate the absence of oxidative stress and indicate that the primary mechanism of cell death is related to the cell membrane damage, which does not appear to be due to lipid peroxidation

Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance

Abstract: Unreacted lead iodide is commonly believed to be beneficial to the efficiency of methylammonium lead iodide perovskite based solar cells, since it has been proposed to passivate the defects in perovskite grain boundaries. However, it is shown here that the presence of unreacted PbI2 results in an intrinsic instability of the film under illumination, leading to the film degradation under inert atmosphere and faster degradation upon exposure to illumination and humidity. The perovskite films without lead iodide have improved stability, but lower efficiency due to inferior film morphology (smaller grain size, the presence of pinholes). Optimization of the deposition process resulted in PbI2-free perovskite films giving comparable efficiency to those with excess PbI2 (14.2 ± 1.3% compared to 15.1 ± 0.9%) Thus, optimization of the deposition process for PbI2-free films leads to dense, pinhole-free, large grain size perovskite films which result in cells with high efficiency without detrimental effects on the film photostability caused by excess PbI2. However, it should be noted that for encapsulated devices illuminated through the substrate (fluorine-doped tin oxide glass, TiO2 film), film photostability is not a key factor in the device degradation.

Recent advances in transition metal complexes and light-management engineering in organic optoelectronic devices.

Abstract: Two of the recent major research topics in optoelectronic devices are discussed: the development of new organic materials (both molecular and polymeric) for the active layer of organic optoelectronic devices (particularly organic light-emitting diodes (OLEDs)), and light management, including light extraction for OLEDs and light trapping for organic solar cells (OSCs). In the first section, recent developments of phosphorescent transition metal complexes for OLEDs in the past 3–4 years are reviewed. The discussion is focused on the development of metal complexes based on iridium, platinum, and a few other transition metals. In the second part, different light-management strategies in the design of OLEDs with improved light extraction, and of OSCs with improved light trapping is discussed.

Tuning the absorption, charge transport properties, and solar cell efficiency with the number of thienyl rings in platinum-containing poly(aryleneethynylene)s.

Abstract: The synthesis, characterization, and photophysics of a series of solution-processable and strongly visible-light absorbing platinum(II) polyynes containing bithiazole-oligo(thienyl) rings were presented. Tuning the polymer solar cell efficiency, as well as optical and charge transport properties, in soluble, low-band gap PtII-based conjugated poly(heteroaryleneethynylene)s using the number of oligothienyl rings is described. These materials are highly soluble in polar organic solvents due to the presence of solubilizing bithiazole moieties and show strong absorptions in the solar spectra, rendering them excellent candidates for bulk heterojunction polymer solar cells. Their photovoltaic responses and power conversion efficiencies (PCEs) depend to a large extent on the number of thienyl rings along the main chain, and some of them can be used to fabricate highly efficient solar cells with PCEs of up to 2.7% and a peak external quantum efficiency to 83% under AM1.5 simulated solar illumination, which is com...

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

Abstract: -phenylenevinylene)s L4. Fluorene-Based Conjugated Polymers L4.1. Fluorene-Based Copolymers ContainingElectron-Rich MoietiesM4.2. Fluorene-Based Copolymers ContainingElectron-Deficient MoietiesN4.3. Fluorene-Based Copolymers ContainingPhosphorescent ComplexesQ5. Carbazole-Based Conjugated Polymers R5.1. Poly(2,7-carbazole)-Based Polymers R5.2. Indolo[3,2-

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

Abstract: Solution-processed bulk-heterojunction solar cells have gained serious attention during the last few years and are becoming established as one of the future photovoltaic technologies for low-cost power production. This article reviews the highlights of the last few years, and summarizes today's state-of-the-art performance. An outlook is given on relevant future materials and technologies that have the potential to guide this young photovoltaic technology towards the magic 10% regime. A cost model supplements the technical discussions, with practical aspects any photovoltaic technology needs to fulfil, and answers to the question as to whether low module costs can compensate lower lifetimes and performances.

Review on Zinc Oxide Nanoparticles: Antibacterial Activity and Toxicity Mechanism.

Abstract: Antibacterial activity of zinc oxide nanoparticles (ZnO-NPs) has received significant interest worldwide particularly by the implementation of nanotechnology to synthesize particles in the nanometer region. Many microorganisms exist in the range from hundreds of nanometers to tens of micrometers. ZnO-NPs exhibit attractive antibacterial properties due to increased specific surface area as the reduced particle size leading to enhanced particle surface reactivity. ZnO is a bio-safe material that possesses photo-oxidizing and photocatalysis impacts on chemical and biological species. This review covered ZnO-NPs antibacterial activity including testing methods, impact of UV illumination, ZnO particle properties (size, concentration, morphology, and defects), particle surface modification, and minimum inhibitory concentration. Particular emphasize was given to bactericidal and bacteriostatic mechanisms with focus on generation of reactive oxygen species (ROS) including hydrogen peroxide (H2O2), OH− (hydroxyl radicals), and O2 −2 (peroxide). ROS has been a major factor for several mechanisms including cell wall damage due to ZnO-localized interaction, enhanced membrane permeability, internalization of NPs due to loss of proton motive force and uptake of toxic dissolved zinc ions. These have led to mitochondria weakness, intracellular outflow, and release in gene expression of oxidative stress which caused eventual cell growth inhibition and cell death. In some cases, enhanced antibacterial activity can be attributed to surface defects on ZnO abrasive surface texture. One functional application of the ZnO antibacterial bioactivity was discussed in food packaging industry where ZnO-NPs are used as an antibacterial agent toward foodborne diseases. Proper incorporation of ZnO-NPs into packaging materials can cause interaction with foodborne pathogens, thereby releasing NPs onto food surface where they come in contact with bad bacteria and cause the bacterial death and/or inhibition.

Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices

Abstract: A review was presented to demonstrate a historical description of the synthesis of light-emitting conjugated polymers for applications in electroluminescent devices. Electroluminescence (EL) was first reported in poly(para-phenylene vinylene) (PPV) in 1990 and researchers continued to make significant efforts to develop conjugated materials as the active units in light-emitting devices (LED) to be used in display applications. Conjugated oligomers were used as luminescent materials and as models for conjugated polymers in the review. Oligomers were used to demonstrate a structure and property relationship to determine a key polymer property or to demonstrate a technique that was to be applied to polymers. The review focused on demonstrating the way polymer structures were made and the way their properties were controlled by intelligent and rational and synthetic design.