© 2020 The Author(s). We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resourceconsuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown.

Production and processing of graphene and related materials

2D Laminar Membranes for Selective Water and Ion Transport

A Review of MOFs and Their Composites-Based Photocatalysts: Synthesis and Applications

Bacterial infections represent nowadays the major reason of biomaterials implant failure, however, most of the available implantable materials do not hold antimicrobial properties, thus requiring antibiotic therapy once the infection occurs. The fast raising of antibiotic-resistant pathogens is making this approach as not more effective, leading to the only solution of device removal and causing devastating consequences for patients. Accordingly, there is a large research about alternative strategies based on the employment of materials holding intrinsic antibacterial properties in order to prevent infections. Between these new strategies, new technologies involving the use of carbon-based materials such as carbon nanotubes, fullerene, graphene and diamond-like carbon shown very promising results. In particular, graphene- and graphene-derived materials (GMs) demonstrated a broad range antibacterial activity toward bacteria, fungi and viruses. These antibacterial activities are attributed mainly to the direct physicochemical interaction between GMs and bacteria that cause a deadly deterioration of cellular components, principally proteins, lipids, and nucleic acids. In fact, GMs hold a high affinity to the membrane proteoglycans where they accumulate leading to membrane damages; similarly, after internalization they can interact with bacteria RNA/DNA hydrogen groups interrupting the replicative stage. Moreover, GMs can indirectly determine bacterial death by activating the inflammatory cascade due to active species generation after entering in the physiological environment. On the opposite, despite these bacteria-targeted activities, GMs have been successfully employed as pro-regenerative materials to favor tissue healing for different tissue engineering purposes. Taken into account these GMs biological properties, this review aims at explaining the antibacterial mechanisms underlying graphene as a promising material applicable in biomedical devices.

/pdf/antimicrobial-mechanisms-and-effectiveness-of-graphene-and-4curz7z7re.pdf

Antimicrobial Mechanisms and Effectiveness of Graphene and Graphene-Functionalized Biomaterials. A Scope Review.

Recent developments in forward osmosis membranes using carbon-based nanomaterials

Multilayered graphene oxide membranes for water treatment: A review

The invention discloses a composite separation membrane provided with non-directional nano-channels and a preparation method of the composite separation membrane. Core-shell structured nanoparticles containing the non-directional nano-channels are inlaid in a porous support layer of the composite separation membrane, the thickness of the porous support layer is 20-80 mu m, and the size of the nanoparticles is 10-50 mu m. The porous support layer is prepared firstly by adding the nanoparticles to a membrane casting solution through blending, and then the composite separation membrane is prepared through interfacial polymerization. The nanoparticles are inlaid in the 20-80-mu m-thick porous support layer instead of being inlaid in a dense layer with the thickness being about 100 nm, so thatstability of the nanoparticles is guaranteed, and irreversible influence of falling off of the nanoparticles on membrane performance is avoided; meanwhile, the nanoparticles bulging out of the surfaceof the porous support layer extend into the dense layer, inlets and outlets of the nano-channels are just exposed out of the membrane surface, and accordingly, water flux and salt rejection rate of the membrane material are increased more effectively.

Composite separation membrane provided with non-directional nano-channels and preparation method of composite separation membrane

The invention discloses an aspartic acid-lysine copolymer and a derivative thereof. Firstly, aspartic acid and lysine are synthesized through a solid-phase synthesis method under the action of a catalyst to obtain a reaction intermediate, and then the reaction intermediate is separated through an organic solvent. Finally, the intermediate is hydrolyzed under an alkaline condition to obtain the aspartic acid-lysine copolymer. The conditions are mild, and the use of a plenty of organic solvents is avoided, so that the method is environmentally friendly. Moreover, a phosphate group, a citrate group or an oxypropyl trimethyl ammonium chloride group are grafted onto free amino of a lysine monomer of the copolymer so as to prepare a copolymer derivative having various scale inhibition groups; the scale inhibition effect of the copolymer on calcium carbonate and calcium sulfate is enhanced, so that the low scale inhibition effect of the copolymer on the calcium phosphate is improved.

Aspartic acid-lysine copolymer and derivative thereof

: With the continuous development of social economy, the heat exchanger in refrigeration equipment is also changing with each passing day. However, the traditional heat exchanger has some problems, such as low utilization rate of heat exchange tubes, low work efficiency, and large energy waste. In view of the above problems, we have carried out a series of optimization designs: for the fluid in the tube side, we have used the U-shaped heat exchange tube to increase the distance of the fluid from the inlet to the outlet, and made full use of all the heat exchange tubes by using the baffle double compartment, which has reduced the phenomenon that the heat exchange tubes do not go through the fluid in the traditional heat exchanger; For the air fluid in the shell side, we have added two-thirds of baffle plates in the shell side. The baffle plates are sleeved on the heat exchange tubes and are located in the middle of the inlet and outlet (not more than the inlet and outlet). Six baffle plates are used to change the path of fluid flow in the shell side, slow down the fluid speed in the shell side, make their time from the flow inlet to the flow outlet increase significantly, thus making the heat exchange time longer, The heat exchange efficiency increases. After our analysis and design, compared with the traditional heat exchanger, my new shell and tube heat exchanger has higher work efficiency, greatly improved heat transfer efficiency, and significantly reduced energy waste.

/pdf/simulation-analysis-of-tube-shell-heat-exchanger-2trmlser.pdf

Wang Xiaojuan

Papers

Multilayered graphene oxide membranes for water treatment: A review

Composite separation membrane provided with non-directional nano-channels and preparation method of composite separation membrane

Aspartic acid-lysine copolymer and derivative thereof

Simulation analysis of tube-shell heat exchanger