Wayne Burleson

Bio: Wayne Burleson is an academic researcher from University of Massachusetts Amherst. The author has contributed to research in topics: Very-large-scale integration & CMOS. The author has an hindex of 42, co-authored 263 publications receiving 8421 citations. Previous affiliations of Wayne Burleson include Nanyang Technological University & University of Colorado Boulder.

Bus-invert coding for low-power I/O

Abstract: Technology trends and especially portable applications drive the quest for low-power VLSI design. Solutions that involve algorithmic, structural or physical transformations are sought. The focus is on developing low-power circuits without affecting too much the performance (area, latency, period). For CMOS circuits most power is dissipated as dynamic power for charging and discharging node capacitances. This is why many promising results in low-power design are obtained by minimizing the number of transitions inside the CMOS circuit. While it is generally accepted that because of the large capacitances involved much of the power dissipated by an IC is at the I/O little has been specifically done for decreasing the I/O power dissipation. We propose the bus-invert method of coding the I/O which lowers the bus activity and thus decreases the I/O peak power dissipation by 50% and the I/O average power dissipation by up to 25%. The method is general but applies best for dealing with buses. This is fortunate because buses are indeed most likely to have very large capacitances associated with them and consequently dissipate a lot of power. >

Power-Up SRAM State as an Identifying Fingerprint and Source of True Random Numbers

Abstract: Intermittently powered applications create a need for low-cost security and privacy in potentially hostile environments, supported by primitives including identification and random number generation. Our measurements show that power-up of SRAM produces a physical fingerprint. We propose a system of fingerprint extraction and random numbers in SRAM (FERNS) that harvests static identity and randomness from existing volatile CMOS memory without requiring any dedicated circuitry. The identity results from manufacture-time physically random device threshold voltage mismatch, and the random numbers result from runtime physically random noise. We use experimental data from high-performance SRAM chips and the embedded SRAM of the WISP UHF RFID tag to validate the principles behind FERNS. For the SRAM chip, we demonstrate that 8-byte fingerprints can uniquely identify circuits among a population of 5,120 instances and extrapolate that 24-byte fingerprints would uniquely identify all instances ever produced. Using a smaller population, we demonstrate similar identifying ability from the embedded SRAM. In addition to identification, we show that SRAM fingerprints capture noise, enabling true random number generation. We demonstrate that a 512-byte SRAM fingerprint contains sufficient entropy to generate 128-bit true random numbers and that the generated numbers pass the NIST tests for runs, approximate entropy, and block frequency.

PUF Modeling Attacks on Simulated and Silicon Data

Abstract: We discuss numerical modeling attacks on several proposed strong physical unclonable functions (PUFs). Given a set of challenge-response pairs (CRPs) of a Strong PUF, the goal of our attacks is to construct a computer algorithm which behaves indistinguishably from the original PUF on almost all CRPs. If successful, this algorithm can subsequently impersonate the Strong PUF, and can be cloned and distributed arbitrarily. It breaks the security of any applications that rest on the Strong PUF's unpredictability and physical unclonability. Our method is less relevant for other PUF types such as Weak PUFs. The Strong PUFs that we could attack successfully include standard Arbiter PUFs of essentially arbitrary sizes, and XOR Arbiter PUFs, Lightweight Secure PUFs, and Feed-Forward Arbiter PUFs up to certain sizes and complexities. We also investigate the hardness of certain Ring Oscillator PUF architectures in typical Strong PUF applications. Our attacks are based upon various machine learning techniques, including a specially tailored variant of logistic regression and evolution strategies. Our results are mostly obtained on CRPs from numerical simulations that use established digital models of the respective PUFs. For a subset of the considered PUFs-namely standard Arbiter PUFs and XOR Arbiter PUFs-we also lead proofs of concept on silicon data from both FPGAs and ASICs. Over four million silicon CRPs are used in this process. The performance on silicon CRPs is very close to simulated CRPs, confirming a conjecture from earlier versions of this work. Our findings lead to new design requirements for secure electrical Strong PUFs, and will be useful to PUF designers and attackers alike.

Reconfigurable Computing for Digital Signal Processing: A Survey

Abstract: Steady advances in VLSI technology and design tools have extensively expanded the application domain of digital signal processing over the past decade. While application-specific integrated circuits (ASICs) and programmable digital signal processors (PDSPs) remain the implementation mechanisms of choice for many DSP applications, increasingly new system implementations based on reconfigurable computing are being considered. These flexible platforms, which offer the functional efficiency of hardware and the programmability of software, are quickly maturing as the logic capacity of programmable devices follows Moore's Law and advanced automated design techniques become available. As initial reconfigurable technologies have emerged, new academic and commercial efforts have been initiated to support power optimization, cost reduction, and enhanced run-time performance. This paper presents a survey of academic research and commercial development in reconfigurable computing for DSP systems over the past fifteen years. This work is placed in the context of other available DSP implementation media including ASICs and PDSPs to fully document the range of design choices available to system engineers. It is shown that while contemporary reconfigurable computing can be applied to a variety of DSP applications including video, audio, speech, and control, much work remains to realize its full potential. While individual implementations of PDSP, ASIC, and reconfigurable resources each offer distinct advantages, it is likely that integrated combinations of these technologies will provide more complete solutions.

PUF Modeling Attacks on Simulated and Silicon Data.

Abstract: We discuss numerical modeling attacks on several proposed Strong Physical Unclonable Functions (PUFs). Given a set of challenge-response pairs (CRPs) of a Strong PUF, the goal of our attacks is to construct a computer algorithm which behaves indistinguishably from the original PUF on almost all CRPs. If successful, this algorithm can subsequently impersonate the Strong PUF, and can be cloned and distributed arbitrarily. It breaks the security of any applications that rest on the Strong PUF’s unpredictability and physical unclonability. Our method is less relevant for other PUF types such as Weak PUFs; see Section I-B for a detailed discussion of this topic. The Strong PUFs that we could attack successfully include standard Arbiter PUFs of essentially arbitrary sizes, and XOR Arbiter PUFs, Lightweight Secure PUFs, and Feed-Forward Arbiter PUFs up to certain sizes and complexities. We also investigate the hardness of certain Ring Oscillator PUF architectures in typical Strong PUF applications. Our attacks are based upon various machine learning techniques, including a specially tailored variant of Logistic Regression and Evolution Strategies. Our results are mostly obtained on CRPs from numerical simulations that use established digital models of the respective PUFs. For a subset of the considered PUFs — namely standard Arbiter PUFs and XOR Arbiter PUFs — we also lead proofs of concept on silicon data from both FPGAs and ASICs. Over four million silicon CRPs are used in this process. The performance on silicon CRPs is very close to simulated CRPs, confirming a conjecture from earlier versions of this work. Our findings lead to new design requirements for secure electrical Strong PUFs, and will be useful to PUF designers and attackers alike.

The Design and Analysis of Experiments

Abstract: THE DESIGN AND ANALYSIS OF EXPERIMENTS. By Oscar Kempthorne. New York, John Wiley and Sons, Inc., 1952. 631 pp. $8.50. This book by a teacher of statistics (as well as a consultant for \"experimenters\") is a comprehensive study of the philosophical background for the statistical design of experiment. It is necessary to have some facility with algebraic notation and manipulation to be able to use the volume intelligently. The problems are presented from the theoretical point of view, without such practical examples as would be helpful for those not acquainted with mathematics. The mathematical justification for the techniques is given. As a somewhat advanced treatment of the design and analysis of experiments, this volume will be interesting and helpful for many who approach statistics theoretically as well as practically. With emphasis on the \"why,\" and with description given broadly, the author relates the subject matter to the general theory of statistics and to the general problem of experimental inference. MARGARET J. ROBERTSON

Architecting phase change memory as a scalable dram alternative

Abstract: Memory scaling is in jeopardy as charge storage and sensing mechanisms become less reliable for prevalent memory technologies, such as DRAM. In contrast, phase change memory (PCM) storage relies on scalable current and thermal mechanisms. To exploit PCM's scalability as a DRAM alternative, PCM must be architected to address relatively long latencies, high energy writes, and finite endurance.We propose, crafted from a fundamental understanding of PCM technology parameters, area-neutral architectural enhancements that address these limitations and make PCM competitive with DRAM. A baseline PCM system is 1.6x slower and requires 2.2x more energy than a DRAM system. Buffer reorganizations reduce this delay and energy gap to 1.2x and 1.0x, using narrow rows to mitigate write energy and multiple rows to improve locality and write coalescing. Partial writes enhance memory endurance, providing 5.6 years of lifetime. Process scaling will further reduce PCM energy costs and improve endurance.

Design Of Analog Cmos Integrated Circuits

Abstract: Thank you for downloading design of analog cmos integrated circuits. Maybe you have knowledge that, people have look hundreds times for their chosen books like this design of analog cmos integrated circuits, but end up in malicious downloads. Rather than enjoying a good book with a cup of coffee in the afternoon, instead they juggled with some harmful virus inside their computer. design of analog cmos integrated circuits is available in our book collection an online access to it is set as public so you can download it instantly. Our digital library spans in multiple countries, allowing you to get the most less latency time to download any of our books like this one. Kindly say, the design of analog cmos integrated circuits is universally compatible with any devices to read.

Physical Unclonable Functions and Applications: A Tutorial

Abstract: This paper describes the use of physical unclonable functions (PUFs) in low-cost authentication and key generation applications. First, it motivates the use of PUFs versus conventional secure nonvolatile memories and defines the two primary PUF types: “strong PUFs” and “weak PUFs.” It describes strong PUF implementations and their use for low-cost authentication. After this description, the paper covers both attacks and protocols to address errors. Next, the paper covers weak PUF implementations and their use in key generation applications. It covers error-correction schemes such as pattern matching and index-based coding. Finally, this paper reviews several emerging concepts in PUF technologies such as public model PUFs and new PUF implementation technologies.