Wei Fang

Bio: Wei Fang is an academic researcher from Zhejiang University. The author has contributed to research in topics: Lithium niobate & Lasing threshold. The author has an hindex of 34, co-authored 141 publications receiving 5012 citations. Previous affiliations of Wei Fang include National Institute of Standards and Technology & Peking University.

Ultraviolet-emitting ZnO nanowires synthesized by a physical vapor deposition approach

Abstract: ZnO nanowires were mass produced using a physical vapor deposition approach. The ZnO nanowire monocrystallites have an average diameter around 60 nm and length up to a few micrometers. The unidirectional growth of the ZnO nanowires was controlled by the conventional vapor-liquid-solid mechanism. Intensive UV light emission peaked around 3.27 eV was observed at room temperature, which was assigned to emission from free exciton under low excitation intensity. The observed room temperature UV emission was ascribed to the decrease in structure defects as compared to bulk ZnO materials, and in particularly to the size effect in the ZnO wires.

Ultrafast All-Optical Graphene Modulator

Abstract: Graphene is an optical material of unusual characteristics because of its linearly dispersive conduction and valence bands and the strong interband transitions. It allows broadband light-matter interactions with ultrafast responses and can be readily pasted to surfaces of functional structures for photonic and optoelectronic applications. Recently, graphene-based optical modulators have been demonstrated with electrical tuning of the Fermi level of graphene. Their operation bandwidth, however, was limited to about 1 GHz by the response of the driving electrical circuit. Clearly, this can be improved by an all-optical approach. Here, we show that a graphene-clad microfiber all-optical modulator can achieve a modulation depth of 38% and a response time of ∼2.2 ps, limited only by the intrinsic carrier relaxation time of graphene. This modulator is compatible with current high-speed fiber-optic communication networks and may open the door to meet future demand of ultrafast optical signal processing.

Fabrication of high-Q lithium niobate microresonators using femtosecond laser micromachining

Abstract: We report on fabrication of high-Q lithium niobate (LN) whispering-gallery-mode (WGM) microresonators suspended on silica pedestals by femtosecond laser direct writing followed by focused ion beam (FIB) milling. The micrometer-scale (diameter ~82 μm) LN resonator possesses a Q factor of ~2.5 × 105 around 1550 nm wavelength. The combination of femtosecond laser direct writing with FIB enables high-efficiency, high-precision nanofabrication of high-Q crystalline microresonators.

Creating polarization-entangled photon pairs from a semiconductor quantum dot using the optical Stark effect.

Abstract: In typical epitaxial quantum dots (QDs) the ideally degenerate optical excitons are energy split, preventing the formation of two-photon entanglement in a biexciton decay. We use an external field, here a continuous-wave laser tuned to the QD in the ac Stark limit, to cancel the splitting and create two-photon entanglement. Quantum-state tomography is used to construct the two-photon density matrix. When the splitting is removed it satisfies well-known entanglement tests. Our approach shows that polarization-entangled photons can be routinely produced in semiconductor nanostructures.

Random lasing in weakly scattering systems

Abstract: We present detailed experimental and numerical studies of random lasing in weakly scattering systems. The interference of scattered light, which is weak in the passive systems, is greatly enhanced in the presence of high gain, providing coherent and resonant feedback for lasing. The lasing modes are confined in the vicinity of the pumped volume due to absorption of emitted light outside it. In the ballistic regime where the size of the gain volume is less than the scattering mean free path, lasing oscillation occurs along the direction in which the gain volume is most extended, producing directional laser output. The feedback for lasing originates mainly from backscattering of particles near the boundaries of the pumped region. It results in nearly constant frequency spacing of lasing modes, which scales inversely with the maximum dimension of the gain volume.

Chemistry and properties of nanocrystals of different shapes.

Abstract: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties * To whom correspondence should be addressed. Phone, 404-8940292; fax, 404-894-0294; e-mail, mostafa.el-sayed@ chemistry.gatech.edu. † Case Western Reserve UniversitysMillis 2258. ‡ Phone, 216-368-5918; fax, 216-368-3006; e-mail, burda@case.edu. § Georgia Institute of Technology. 1025 Chem. Rev. 2005, 105, 1025−1102

Principles Of Fluorescence Spectroscopy

Abstract: Thank you very much for downloading principles of fluorescence spectroscopy. As you may know, people have look hundreds times for their favorite novels like this principles of fluorescence spectroscopy, but end up in malicious downloads. Rather than reading a good book with a cup of tea in the afternoon, instead they cope with some harmful bugs inside their desktop computer. principles of fluorescence spectroscopy is available in our digital library an online access to it is set as public so you can download it instantly. Our digital library spans in multiple locations, allowing you to get the most less latency time to download any of our books like this one. Kindly say, the principles of fluorescence spectroscopy is universally compatible with any devices to read.

Solution-processed, high-performance light-emitting diodes based on quantum dots

Abstract: Solution-processed optoelectronic and electronic devices are attractive owing to the potential for low-cost fabrication of large-area devices and the compatibility with lightweight, flexible plastic substrates. Solution-processed light-emitting diodes (LEDs) using conjugated polymers or quantum dots as emitters have attracted great interest over the past two decades. However, the overall performance of solution-processed LEDs--including their efficiency, efficiency roll-off at high current densities, turn-on voltage and lifetime under operational conditions-remains inferior to that of the best vacuum-deposited organic LEDs. Here we report a solution-processed, multilayer quantum-dot-based LED with excellent performance and reproducibility. It exhibits colour-saturated deep-red emission, sub-bandgap turn-on at 1.7 volts, high external quantum efficiencies of up to 20.5 per cent, low efficiency roll-off (up to 15.1 per cent of the external quantum efficiency at 100 mA cm(-2)), and a long operational lifetime of more than 100,000 hours at 100 cd m(-2), making this device the best-performing solution-processed red LED so far, comparable to state-of-the-art vacuum-deposited organic LEDs. This optoelectronic performance is achieved by inserting an insulating layer between the quantum dot layer and the oxide electron-transport layer to optimize charge balance in the device and preserve the superior emissive properties of the quantum dots. We anticipate that our results will be a starting point for further research, leading to high-performance, all-solution-processed quantum-dot-based LEDs ideal for next-generation display and solid-state lighting technologies.

CsPbX3 Quantum Dots for Lighting and Displays: Room-Temperature Synthesis, Photoluminescence Superiorities, Underlying Origins and White Light-Emitting Diodes

Abstract: Recently, Kovalenko and co-workers and Li and co-workers developed CsPbX3 (X = Cl, Br, I) inorganic perovskite quantum dots (IPQDs), which exhibited ultrahigh photoluminescence (PL) quantum yields (QYs), low-threshold lasing, and multicolor electroluminescence. However, the usual synthesis needs high temperature, inert gas protection, and localized injection operation, which are severely against applications. Moreover, the so unexpectedly high QYs are very confusing. Here, for the first time, the IPQDs' room-temperature (RT) synthesis, superior PL, underlying origins and potentials in lighting and displays are reported. The synthesis is designed according to supersaturated recrystallization (SR), which is operated at RT, within few seconds, free from inert gas and injection operation. Although formed at RT, IPQDs' PLs have QYs of 80%, 95%, 70%, and FWHMs of 35, 20, and 18 nm for red, green, and blue emissions. As to the origins, the observed 40 meV exciton binding energy, halogen self-passivation effect, and CsPbX3@X quantum-well band alignment are proposed to guarantee the excitons generation and high-rate radiative recombination at RT. Moreover, such superior optical merits endow them with promising potentials in lighting and displays, which are primarily demonstrated by the white light-emitting diodes with tunable color temperature and wide color gamut.