Wenjian Zhang

Bio: Wenjian Zhang is an academic researcher from University of Southampton. The author has contributed to research in topics: Supercritical fluid & Denticity. The author has an hindex of 21, co-authored 64 publications receiving 1145 citations.

Electrodeposition of metals from supercritical fluids

Abstract: Electrodeposition is a widely used materials-deposition technology with a number of unique features, in particular, the efficient use of starting materials, conformal, and directed coating. The properties of the solvent medium for electrodeposition are critical to the technique's applicability. Supercritical fluids are unique solvents which give a wide range of advantages for chemistry in general, and materials processing in particular. However, a widely applicable approach to electrodeposition from supercritical fluids has not yet been developed. We present here a method that allows electrodeposition of a range of metals from supercritical carbon dioxide, using acetonitrile as a co-solvent and supercritical difluoromethane. This method is based on a careful selection of reagent and supporting electrolyte. There are no obvious barriers preventing this method being applied to deposit a range of materials from many different supercritical fluids. We present the deposition of 3-nm diameter nanowires in mesoporous silica templates using this methodology.

Germanium(II) dications stabilized by azamacrocycles and crown ethers.

Abstract: A crown for germanium: Neutral aza- and oxamacrocycles enable stabilization of halide-free germanium(II) dications (see structure, Ge teal, N blue, C gray). The resulting structures show a marked dependence upon the denticity, donor type, and ring size of the macrocycle.

The chemistry of the p-block elements with thioether, selenoether and telluroether ligands

Abstract: The synthesis and structures of acyclic and macrocyclic thio-, seleno- and telluro-ether complexes of the metallic and metalloid elements of Groups 13-16 reported since 2000 are described. The diverse structures range from discrete monomers through to infinite 1-, 2- or 3-D polymers. The coordination chemistry in this area is quite different to familiar d-block chemistry and the underlying factors are explored.

Synthesis and structural characterisation of germanium(II) halide complexes with neutral N-donor ligands

Abstract: The Ge(II) complexes [GeX2(L–L)] (L–L = 1,10-phen (X = Cl, Br); L–L = Me2N(CH2)2NMe2, 2,2′-bipy (X = Cl)), [GeX(L–L)][GeX3] (L–L = 2,2′-bipy (X = Br); L–L = pmdta (MeN(CH2CH2NMe2)2) (X = Cl, Br)) have been prepared and their crystal structures determined. The crystal structure of [GeCl2{Me2N(CH2)2NMe2}] shows a weakly associated centrosymmetric dimer based upon distorted square-pyramidal coordination at Ge(II) and containing asymmetrically chelating diamine ligands. The structure of [GeCl2(2,2′-bipy)] contains a chelating 2,2′-bipy ligand and forms a zig-zag chain polymer via long-range intermolecular Ge⋯Cl bridging interactions, leading to a very distorted six-coordinate environment at Ge. [GeCl2(1,10-phen)] adopts a weakly associated dimeric structure similar to that in [GeCl2{Me2N(CH2)2NMe2}], whereas [GeBr2(1,10-phen)] is again a zig-zag polymer similar to [GeCl2(2,2′-bipy)]. [GeBr(2,2′-bipy)][GeBr3] contains a pyramidal cation with a chelating 2,2′-bipy and a terminal Br ligand and with long-range contacts involving the three Br atoms in the anion. [GeX(pmdta)][GeX3] (X = Cl or Br) show discrete cations and anions, with no significant long-range interactions. The bonding in these systems can be described as covalent, with longer range interactions to other ligands involving the 4p orbitals of Ge. DFT calculations performed on [GeCl2(2,2′-bipy)] show that the geometry of the monomer unit in the experimental crystal structure does not correspond to the global minimum of the isolated molecule, but to a higher energy minimum. In contrast, the calculated structure of the tetramer shows some of the main structural characteristics observed in the crystal structure.

Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields

Abstract: : The unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio. Harmonic force fields are obtained using Density Functional Theory (DFT), MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set. DFT calculations use the Local Spin Density Approximation (LSDA), BLYP, and Becke3LYP (B3LYP) density functionals. Mid-IR spectra predicted using LSDA, BLYP, and B3LYP force fields are of significantly different quality, the B3LYP force field yielding spectra in clearly superior, and overall excellent, agreement with experiment. The MP2 force field yields spectra in slightly worse agreement with experiment than the B3LYP force field. The SCF force field yields spectra in poor agreement with experiment.The basis set dependence of B3LYP force fields is also explored: the 6-31G* and TZ2P basis sets give very similar results while the 3-21G basis set yields spectra in substantially worse agreements with experiment. jg

Halogen bonding: an electrostatically-driven highly directional noncovalent interaction

Abstract: A halogen bond is a highly directional, electrostatically-driven noncovalent interaction between a region of positive electrostatic potential on the outer side of the halogen X in a molecule R–X and a negative site B, such as a lone pair of a Lewis base or the π-electrons of an unsaturated system. The positive region on X corresponds to the electronically-depleted outer lobe of the half-filled p-type orbital of X that is involved in forming the covalent bond to R. This depletion is labeled a σ-hole. The resulting positive electrostatic potential is along the extension of the R–X bond, which accounts for the directionality of halogen bonding. Positive σ-holes can also be found on covalently-bonded Group IV–VI atoms, which can similarly interact electrostatically with negative sites. Since positive σ-holes often exist in conjunction with negative potentials on other portions of the atom's surface, such atoms can interact electrostatically with both nucleophiles and electrophiles, as has been observed in surveys of crystallographic structures. Experimental as well as computational studies indicate that halogen and other σ-hole interactions can be competitive with hydrogen bonding, which itself can be viewed as a subset of σ-hole bonding.

Damascene copper electroplating for chip interconnections

Abstract: Damascene copper electroplating for on-chip interconnections, a process that we conceived and developed in the early 1990s, makes it possible to fill submicron trenches and vias with copper without creating a void or a seam and has thus proven superior to other technologies of copper deposition. We discuss here the relationship of additives in the plating bath to superfilling, the phenomenon that results in superconformal coverage, and we present a numerical model which accounts for the experimentally observed profile evolution of the plated metal.

Nanoscaled metal borides and phosphides: recent developments and perspectives

Abstract: and Perspectives Sophie Carenco,†,‡,§,∥,⊥ David Portehault,*,†,‡,§ Ced́ric Boissier̀e,†,‡,§ Nicolas Meźailles, and Cleḿent Sanchez*,†,‡,§ †Chimie de la Matier̀e Condenseé de Paris, UPMC Univ Paris 06, UMR 7574, Colleg̀e de France, 11 Place Marcelin Berthelot, 75231 Paris Cedex 05, France ‡Chimie de la Matier̀e Condenseé de Paris, CNRS, UMR 77574, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Chimie de la Matier̀e Condenseé de Paris, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Laboratory Heteroelements and Coordination, Chemistry Department, Ecole Polytechnique, CNRS-UMR 7653, Palaiseau, France

Mesoporous materials and electrochemistry

Abstract: Ordered mesoporous materials prepared by the template route have attracted increasing interest from the electrochemists community due to their plenty of unique properties and functionalities that can be effectively exploited in electrochemical devices. This review will cover the whole field of the intersection between electrochemistry and ordered mesoporous materials. The latter are either electronically insulating (silica and some other metal oxides, as well as silica-based organic–inorganic hybrid materials), semi-conducting (metal oxides), or conducting (metals, carbons). The three main intersection areas are: (1) the development/use of electrochemical methods to characterize the properties of mesoporous materials (i.e., charge and mass transfer processes); (2) the generation of mesostructured solids by electro-assisted deposition using appropriate templates; and (3) the application of these novel materials for electrochemical purposes. The most common devices to date are based on a bulk composite or thin film configuration and the resulting electrodes modified with such mesoporous materials have been successfully applied in various fields, including mainly electrochemical sensing and biosensing as well as energy conversion and storage (620 references).