TiO(2) is one of the most studied compounds in materials science. Owing to some outstanding properties it is used for instance in photocatalysis, dye-sensitized solar cells, and biomedical devices. In 1999, first reports showed the feasibility to grow highly ordered arrays of TiO(2) nanotubes by a simple but optimized electrochemical anodization of a titanium metal sheet. This finding stimulated intense research activities that focused on growth, modification, properties, and applications of these one-dimensional nanostructures. This review attempts to cover all these aspects, including underlying principles and key functional features of TiO(2), in a comprehensive way and also indicates potential future directions of the field.

TiO2 nanotubes: synthesis and applications.

Although known since the late 19th century, organic–inorganic perovskites have recently received extraordinary research community attention because of their unique physical properties, which make them promising candidates for application in photovoltaic (PV) and related optoelectronic devices. This review will explore beyond the current focus on three-dimensional (3-D) lead(II) halide perovskites, to highlight the great chemical flexibility and outstanding potential of the broader class of 3-D and lower dimensional organic-based perovskite family for electronic, optical, and energy-based applications as well as fundamental research. The concept of a multifunctional organic–inorganic hybrid, in which the organic and inorganic structural components provide intentional, unique, and hopefully synergistic features to the compound, represents an important contemporary target.

Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design

Solar driven catalysis on semiconductors to produce clean chemical fuels, such as hydrogen, is widely considered as a promising route to mitigate environmental issues caused by the combustion of fossil fuels and to meet increasing worldwide demands for energy. The major limiting factors affecting the efficiency of solar fuel synthesis include; (i) light absorption, (ii) charge separation and transport and (iii) surface chemical reaction; therefore substantial efforts have been put into solving these problems. In particular, the loading of co-catalysts or secondary semiconductors that can act as either electron or hole acceptors for improved charge separation is a promising strategy, leading to the adaptation of a junction architecture. Research related to semiconductor junction photocatalysts has developed very rapidly and there are a few comprehensive reviews in which the strategy is discussed (A. Kudo and Y. Miseki, Chemical Society Reviews, 2009, 38, 253–278, K. Li, D. Martin, and J. Tang, Chinese Journal of Catalysis, 2011, 32, 879–890, R. Marschall, Advanced Functional Materials, 2014, 24, 2421–2440). This critical review seeks to give an overview of the concept of heterojunction construction and more importantly, the current state-of-the art for the efficient, visible-light driven junction water splitting photo(electro)catalysts reported over the past ten years. For water splitting, these include BiVO4, Fe2O3, Cu2O and C3N4, which have attracted increasing attention. Experimental observations of the proposed charge transfer mechanism across the semiconductor/semiconductor/metal junctions and the resultant activity enhancement are discussed. In parallel, recent successes in the theoretical modelling of semiconductor electronic structures at interfaces and how these explain the functionality of the junction structures is highlighted.

/pdf/visible-light-driven-heterojunction-photocatalysts-for-water-33q4busijg.pdf

Visible-light driven heterojunction photocatalysts for water splitting – a critical review

This Review focuses on recent developments in the use of ZnO nanostructures for dye-sensitized solar cell (DSC) applications. It is shown that carefully designed and fabricated nanostructured ZnO films are advantageous for use as a DSC photoelectrode as they offer larger surface areas than bulk film material, direct electron pathways, or effective light-scattering centers, and, when combined with TiO2, produce a core–shell structure that reduces the combination rate. The limitations of ZnO-based DSCs are also discussed and several possible methods are proposed so as to expand the knowledge of ZnO to TiO2, motivating further improvement in the power-conversion efficiency of DSCs.

https://depts.washington.edu/solgel/documents/pub_docs/journal_docs/2009/advanced_material2009.pdf

ZnO Nanostructures for Dye-Sensitized Solar Cells

There is a growing interest in the conversion of water and solar energy into clean and renewable H2 fuels using earth-abundant materials due to the depletion of fossil fuel and its serious environmental impact. This critical review highlights some key factors influencing the efficiency of heterogeneous semiconductors for solar water splitting (i.e. improved charge separation and transfer, promoted optical absorption, optimized band gap position, lowered cost and toxicity, and enhanced stability and water splitting kinetics). Moreover, different engineering strategies, such as band structure engineering, micro/nano engineering, bionic engineering, co-catalyst engineering, surface/interface engineering of heterogeneous semiconductors are summarized and discussed thoroughly. The synergistic effects of the different engineering strategies, especially for the combination of co-catalyst loading and other strategies seem to be more promising for the development of highly efficient photocatalysts. A thorough understanding of electron and hole transfer thermodynamics and kinetics at the fundamental level is also important for elucidating the key efficiency-limiting step and designing highly efficient solar-to-fuel conversion systems. In this review, we provide not only a summary of the recent progress in the different engineering strategies of heterogeneous semiconductors for solar water splitting, but also some potential opportunities for designing and optimizing solar cells, photocatalysts for the reduction of CO2 and pollutant degradation, and electrocatalysts for water splitting.

Engineering heterogeneous semiconductors for solar water splitting

Novel CdS quantum dots (QDs) sensitized TiO2 nanotube-array photoelectrodes were investigated for their photoelectrochemical (PEC) performance. The highly ordered TiO2 nanotube arrays were synthesized by anodic oxidation and CdS QDs were deposited into the pores of the nanotube arrays by a sequential chemical bath deposition method. It is found that the CdS QDs deposited in the pores of the TiO2 nanotube arrays may significantly increase the liquid junction PEC short circuit photocurrent (from 0.22 to 7.82 mA/cm2) and cell efficiency (up to 4.15%). These results clearly demonstrate that the unique nanotube structure can facilitate the propagation and kinetic separation of photogenerated charges, suggesting potentially important applications of the inorganic QDs sensitized TiO2 nanotube-array films in solar cell applications.

CdS quantum dots sensitized TiO2 nanotube-array photoelectrodes.

Organohalide lead perovskite based photodetectors with much enhanced performance

A heterojunction CdS/TiO2 photoelectrode is prepared by filling CdS nanoparticles into one-dimensional TiO2 nanotube (NT) array films. The self-assembled TiO2 NTs are fabricated by an anodization method and sensitized with CdS nanoparticles by the close space sublimation technique. The photoactivity of the as-prepared photoelectrodes was measured in a photoelectrochemical solar cell. Under AM 1.5G illumination, a 5.6 mA/cm2 short-circuit current density is achieved using the CdS modified photoelectrode, which represents an enhancement by a factor of 36 in photoactivity compared with that of the plain TiO2 NT array film.

An Efficient Method To Form Heterojunction CdS/TiO2 Photoelectrodes Using Highly Ordered TiO2 Nanotube Array Films

Hydrothermal synthesis of organometal halide perovskites for Li-ion batteries

The photoresponse of TiO2 nanotube-array films in the visible region is shown to have been significantly improved by sensitizing them with CdS and CdSe semiconductor quantum dots using a sequential chemical bath deposition method. These quantum dots served as cosensitizers, and the performance of corresponding photoelectrode was measured in a photoelectrochemical solar cell. A 13.0 mA/cm2 short circuit current density is achieved with the TiO2/CdS/CdSe photoelectrode under AM 1.5G illuminations, which is higher than the direct sum of CdS and CdSe sensitized TiO2.

Wentao Sun

Papers

CdS quantum dots sensitized TiO2 nanotube-array photoelectrodes.

Organohalide lead perovskite based photodetectors with much enhanced performance

An Efficient Method To Form Heterojunction CdS/TiO2 Photoelectrodes Using Highly Ordered TiO2 Nanotube Array Films

Hydrothermal synthesis of organometal halide perovskites for Li-ion batteries

Photoelectric performance of TiO2 nanotube array photoelectrodes cosensitized with CdS/CdSe quantum dots