Author
Wenwen Zhang
Other affiliations: Xi'an Jiaotong University
Bio: Wenwen Zhang is an academic researcher from Shanghai Jiao Tong University. The author has contributed to research in topics: Waste heat & Thermal power station. The author has an hindex of 1, co-authored 1 publications receiving 4 citations. Previous affiliations of Wenwen Zhang include Xi'an Jiaotong University.
Topics: Waste heat, Thermal power station, Heat pipe, Brayton cycle
Papers
More filters
TL;DR: In this paper, a new conceptual design of a megawatt power level heat pipe cooled space Reactor (HPCR) power system adopted the integrated heatpipe-fuel modules is developed.
28 citations
Cited by
More filters
TL;DR: In this article , a 65.5 MWth heat pipe cooled traveling wave (HPTWR) design is proposed, which uses neutron traveling wave to improve the continuous operation time and reduce the enrichment of loaded fuel comparing to the currently existing heat pipe reactor designs.
10 citations
TL;DR: In this paper, the authors proposed a thermodynamic modeling of a recuperated closed Brayton cycle (CBC) and a thermal model is carried out to predict the overall properties of the cold side of the system (i.e., heat pipes and radiator) for different CBC conditions.
9 citations
TL;DR: In this paper, the concept of Unattended Uranium-fueled Portable Reactor (UPR) for the NUClear Silence ThermoElectric Reactor(NUSTER) power system is introduced and the reactor core with a thermal power of 1MW is neutronics designed.
8 citations
TL;DR: In this article , a two-dimensional heat pipe model and an open-air Brayton cycle model coupled to the Heat Pipe Reactor TRANsient analysis code, HPRTRAN, were used to analyze a megawatt heat pipe reactor.
Abstract: Heat pipe cooled reactors experience temperature rises of up to 800 K during startup. The in-core heat pipes and the energy conversion system are initially frozen, which leads to a highly coupled heat transfer system that has significant safety challenges. This work modeled the system startup using a two-dimensional heat pipe model and an open-air Brayton cycle model coupled to the Heat Pipe Reactor TRANsient analysis code, HPRTRAN. The heat pipe model was validated with startup experiments showing that the predicted heat pipe wall temperature was within 30 K of the measured temperatures. The Brayton cycle model was validated against experimental data in the literature. The analysis code was then used to analyze a megawatt heat pipe reactor connected to an open-air Brayton cycle, which was used to study the influence of the external reactivity and the inherent feedback on the startup process. The simulations show that the reactor startup process is sensitive to the heat pipe operating state. The startup process can be divided into the subcritical stage, heat pipe startup stage, and increasing power stage. The power peak amplitudes are significantly reduced by slowing the angular speed of the control drum. Reducing the control drum angular speed from 0.1°/min to 0.05°/min reduced the first power peak from 2000 kW to 1000 kW. A modified reactor startup control strategy was then developed that ensures the core safety with the reactivity introduced in steps. Smaller reactivity insertions reduce the power peaks during the initial startup but lead to much longer startup times. A reasonable balance was obtained by repeated insertions of either 30 pcm or 60 pcm for safe startups of the heat pipe cooled reactor.
5 citations