White

Bio: White is an academic researcher from University of Cambridge. The author has contributed to research in topics: Silicate minerals & Mineral. The author has an hindex of 1, co-authored 1 publications receiving 794 citations.

The effect of TiO2 and Fe2O3 on metapelitic assemblages at greenschist and amphibolite facies conditions: mineral equilibria calculations in the system K2O-FeO-MgO-Al2O3-SiO2-H2O-TiO2-Fe2O3

Abstract: Mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (KFMASHTO) using thermocalc and its internally consistent thermodynamic dataset constrain the effect of TiO2 and Fe2O3 on greenschist and amphibolite facies mineral equilibria in metapelites. The end-member data and activity–composition relationships for biotite and chloritoid, calibrated with natural rock data, and activity–composition data for garnet, calibrated using experimental data, provide new constraints on the effects of TiO2 and Fe2O3 on the stability of these minerals. Thermodynamic models for ilmenite–hematite and magnetite–ulvospinel solid solutions accounting for order–disorder in these phases allow the distribution of TiO2 and Fe2O3 between oxide minerals and silicate minerals to be calculated. The calculations indicate that small to moderate amounts of TiO2 and Fe2O3 in typical metapelitic bulk compositions have little effect on silicate mineral equilibria in metapelites at greenschist to amphibolite facies, compared with those calculated in KFMASH. The addition of large amounts of TiO2 to typical pelitic bulk compositions has little effect on the stability of silicate assemblages; in contrast, rocks rich in Fe2O3 develop a markedly different metamorphic succession from that of common Barrovian sequences. In particular, Fe2O3-rich metapelites show a marked reduction in the stability fields of staurolite and garnet to higher pressures, in comparison to those predicted by KFMASH grids.

Progress relating to calculation of partial melting equilibria for metapelites

Abstract: mproved activity–composition relationships for biotite, garnet and silicate liquid are used to construct updated P–T grids and pseudosections for high-grade metapelites. The biotite model involves Ti charge-balanced by hydrogen deprotonation on the hydroxyl site, following the substitution , where HD represents the hydroxyl site. Relative to equivalent biotite-breakdown melting reactions in P–T grids in K2O–FeO–MgO–Al2O3–SiO2–H2O (KFMASH), those in K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (KFMASHTO) occur at temperatures close to 50 °C higher. A further consequence of the updated activity models is that spinel-bearing equilibria occur to higher temperature and higher pressure. In contrast, the addition of Na2O and CaO to KFMASH to make the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O (NCKFMASH) system lowers key biotite-breakdown melting reactions in P–T space relative to KFMASH. Combination of the KFMASHTO and NCKFMASH systems to make Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (NCKFMASHTO) results in key biotite-breakdown melting reactions occurring at temperatures intermediate between those in KFMASHTO and those in NCKFMASH. Given such differences, the choice of model system will be critical to inferred P–T conditions in the application of mineral equilibria modelling to rocks. Further, pseudosections constructed in KFMASH, NCKFMASH and NCKFMASHTO for several representative rock compositions show substantial differences not only in the P–T conditions of key metamorphic assemblages but also overall topology, with the calculations in NCKFMASHTO more reliably reflecting equilibria in rocks. Application of mineral equilibria modelling to rocks should be undertaken in the most comprehensive system possible, if reliable quantitative P–T information is to be derived.

New mineral activity-composition relations for thermodynamic calculations in metapelitic systems

Abstract: New activity–composition (a–x) relations for minerals commonly occurring in metapelites are presented for use with the internally consistent thermodynamic dataset of Holland & Powell (2011, Journal of Metamorphic Geology, 29, 333–383). The a–x relations include a broader consideration of Fe2O3 in minerals, changes to the formalism of several phases and order–disorder in all ferromagnesian minerals where Fe–Mg mixing occurs on multiple sites. The a–x relations for chlorite, biotite, garnet, chloritoid, staurolite, cordierite, orthopyroxene, muscovite, paragonite and margarite have been substantially reparameterized using the approach outlined in the companion paper in this issue. For the first time, the entire set of a–x relations for the common ferromagnesian minerals in metapelitic rocks is parameterized simultaneously, with attention paid to ensuring that they can be used together to calculate phase diagrams of geologically appropriate topology. The a–x relations developed are for use in the Na2O–CaO–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O2 (NCKFMASHTO) system for both subsolidus and suprasolidus conditions. Petrogenetic grids in KFMASH and KFMASHTO are similar in topology to those produced with earlier end-member datasets and a–x relations, but with some notable differences. In particular, in subsolidus equilibria, the FeO/(FeO + MgO) of garnet is now greater than in coexisting staurolite, bringing a number of key staurolite-bearing equilibria into better agreement with inferences from field and petrographic observations. Furthermore, the addition of Fe3+ and Ti to a number of silicate phases allows more plausible equilibria to be calculated in relevant systems. Pseudosections calculated with the new a–x relations are also topologically similar to equivalent diagrams using earlier a–x relations, although with many low variance fields shifting in P–T space to somewhat lower pressure conditions.

The interpretation of reaction textures in Fe-rich metapelitic granulites of the Musgrave Block, central Australia: constraints from mineral equilibria calculations in the system K2O-FeO-MgO-Al2O3-SiO2-H2O-TiO2-Fe2O3

Abstract: Fe-rich metapelitic granulites of the Musgrave Block, central Australia, contain several symplectic and coronal reaction textures that post-date a peak S2 metamorphic assemblage involving garnet, sillimanite, spinel, ilmenite, K-feldspar and quartz. The earliest reaction textures involve spinel- and quartz-bearing symplectites that enclose garnet and to a lesser extent sillimanite. The symplectic spinel and quartz are in places separated by later garnet and/or sillimanite coronas. The metamorphic effects of a later, D3, event are restricted to zones of moderate to high strain where a metamorphic assemblage of garnet, sillimanite, K-feldspar, magnetite, ilmenite, quartz and biotite is preserved. Quantitative mineral equilibria calculations in the system K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–Fe2O3 (KFMASHTO) using Thermocalc 3.0 and the accompanying internally consistent dataset provide important constraints on the influence of TiO2 and Fe2O3 on biotite-bearing and spinel-bearing equilibria, respectively. Biotite-bearing equilibria are shifted to higher temperatures and spinel-bearing equilibria to higher pressures and lower temperatures in comparison to the equivalent equilibria in K2O–FeO–MgO–Al2O3–SiO2–H2O (KFMASH). The sequence of reaction textures involving spinel is consistent with a D2 P–T path that involved a small amount of decompression followed predominantly by cooling within a single mineral assemblage stability field. Thus, the reaction textures reflect changes in modal proportions within an equilibrium assemblage rather than the crossing of a univariant reaction. The D3 metamorphic assemblage is consistent with lower temperatures than those inferred for D2.

Petrology of subducted slabs

Abstract: ▪ Abstract The subducted lithosphere is composed of a complex pattern of chemical systems that undergo continuous and discontinuous phase transformation, through pressure and temperature variations. Volatile recycling plays a major geodynamic role in triggering mass transfer, melting, and volcanism. Although buoyancy forces are controlled by modal amounts of the most abundant phases, usually volatile-free, petrogenesis and chemical differentiation are controlled by the occurrence of minor phases, most of them volatile-bearing. Devolatilization of the subducted lithosphere is a continuous process distributed over more than 300 km of the slab-mantle interface. Melting of the subducted crust, if any, along sufficiently hot P-T paths, is governed by fluid-absent reactions, even though the difference between fluid and melt vanishes at pressures above the second critical end point. The density distribution at a depth of 660 km suggests episodic penetration in space and time of subducted slabs into the lower man...

Activity–composition relations for the calculation of partial melting equilibria in metabasic rocks

Abstract: A set of thermodynamic models is presented that, for the first time, allows partial melting equilibria to be calculated for metabasic rocks. The models consist of new activity–composition relations combined with end-member thermodynamic properties from the Holland & Powell dataset, version 6. They allow for forward modelling in the system Na (Formula presented.) O–CaO–K (Formula presented.) O–FeO–MgO–Al (Formula presented.) O (Formula presented.) –SiO (Formula presented.) –H (Formula presented.) O–TiO (Formula presented.) –Fe (Formula presented.) O (Formula presented.). In particular, new activity–composition relations are presented for silicate melt of broadly trondhjemitic–tonalitic composition, and for augitic clinopyroxene with Si–Al mixing on the tetrahedral sites, while existing activity–composition relations for hornblende are extended to include K (Formula presented.) O and TiO (Formula presented.). Calibration of the activity–composition relations was carried out with the aim of reproducing major experimental phase-in/phase-out boundaries that define the amphibolite–granulite transition, across a range of bulk compositions, at ≤13 kbar.