Wilfried Vervisch

Bio: Wilfried Vervisch is an academic researcher from Aix-Marseille University. The author has contributed to research in topics: Photonic crystal & Neutron. The author has an hindex of 7, co-authored 26 publications receiving 220 citations. Previous affiliations of Wilfried Vervisch include Centre national de la recherche scientifique.

Slow Bloch modes for enhancing the absorption of light in thin films for photovoltaic cells

Abstract: This paper deals with the improvement of “light harvesting” in photovoltaic cells by using photonic nanostructures. We theoretically study a poly-3-hexylthiophene/[6,6]-phenyl-C61-butyric acid methyl ester (P3HT/PCBM) thin film periodically nanostructured in order to increase its absorption. The periodic nanostructuration allows “slow Bloch modes” (group velocity close to zero) to be coupled inside the material. The P3HT/PCBM photonic crystal parameters are adjusted to maximize the density of Bloch modes and obtain flat dispersion curves. The light-matter interaction is thus strongly enhanced, which results in a 35.6% increase of absorption in the 600–700nm spectral range.

Optical-electrical simulation of organic solar cells: Influence of light trapping by photonic crystal and ZnO spacer on electrical characteristics

Abstract: This paper deals with organic solar cells (OSC) simulation using finite element method. Optical modeling is performed via finite difference time domain method whilst the continuity and Poisson’s equations are solved to obtain electrical characteristics of the OSC. In this work, simulation results point out the OSC structure influence on its performances, either by the interface grating or by the ZnO optical spacer introduced between the active layer (P3HT:PCBM layer) and the metallic electrode. The comparison of modeling results and experimental measurement allows us to confirm and forecast the enhancement of the photovoltaic properties such as the power conversion efficiency.

Optical-electrical simulation of organic solar cells: excitonic modeling parameter influence on electrical characteristics

Abstract: This paper deals with Organic Solar Cells (OSCs) simulation using finite element method. Optical modeling is performed via Finite Difference Time Domain method whereas the continuity and Poisson’s equations are solved to obtain electrical characteristics of the OSC. In this work, simulation results point out the influence of physical parameters such as the exciton diffusion coefficient or the exciton lifetime on OSC performances. The comparison of modeling results and experimental measurement allows the exciton recombination, dissociation rate and lifetime to be determinated.

Bringing some photonic structures for solar cells to the fore.

Abstract: A review on the use of photonic structures enabling a better absorption of solar radiation within solar cells is proposed. Specific geometric configurations, such as folded solar cells or fiber-based architectures, are shown to be promising solutions to reach better light absorption. Electromagnetic optimization of thin-film solar cells and the use of angular thin-film filters, proposed by several research groups, also provide solutions to better concentrate solar radiation within the active layers of solar cells. Finally, results on "photonized" solar cells comprising gratings or more advanced photonic components, such as photonic crystals or plasmonic structures, and their effects on light-matter interaction in solar cells are highlighted.

Organic Optoelectronic Materials: Mechanisms and Applications

Abstract: Organic (opto)electronic materials have received considerable attention due to their applications in thin-film-transistors, light-emitting diodes, solar cells, sensors, photorefractive devices, and many others. The technological promises include low cost of these materials and the possibility of their room-temperature deposition from solution on large-area and/or flexible substrates. The article reviews the current understanding of the physical mechanisms that determine the (opto)electronic properties of high-performance organic materials. The focus of the review is on photoinduced processes and on electronic properties important for optoelectronic applications relying on charge carrier photogeneration. Additionally, it highlights the capabilities of various experimental techniques for characterization of these materials, summarizes top-of-the-line device performance, and outlines recent trends in the further development of the field. The properties of materials based both on small molecules and on conjug...

A Comprehensive Review of Semiconductor Ultraviolet Photodetectors: From Thin Film to One-Dimensional Nanostructures

Abstract: Ultraviolet (UV) photodetectors have drawn extensive attention owing to their applications in industrial, environmental and even biological fields. Compared to UV-enhanced Si photodetectors, a new generation of wide bandgap semiconductors, such as (Al, In) GaN, diamond, and SiC, have the advantages of high responsivity, high thermal stability, robust radiation hardness and high response speed. On the other hand, one-dimensional (1D) nanostructure semiconductors with a wide bandgap, such as β-Ga2O3, GaN, ZnO, or other metal-oxide nanostructures, also show their potential for high-efficiency UV photodetection. In some cases such as flame detection, high-temperature thermally stable detectors with high performance are required. This article provides a comprehensive review on the state-of-the-art research activities in the UV photodetection field, including not only semiconductor thin films, but also 1D nanostructured materials, which are attracting more and more attention in the detection field. A special focus is given on the thermal stability of the developed devices, which is one of the key characteristics for the real applications.

Optical absorption enhancement in silicon nanowire arrays with a large lattice constant for photovoltaic applications.

Abstract: In this paper, we use the transfer matrix method to calculate the optical absorptance of vertically-aligned silicon nanowire (SiNW) arrays. For fixed filling ratio, significant optical absorption enhancement occurs when the lattice constant is increased from 100 nm to 600 nm. The enhancement arises from an increase in field concentration within the nanowire as well as excitation of guided resonance modes. We quantify the absorption enhancement in terms of ultimate efficiency. Results show that an optimized SiNW array with lattice constant of 600 nm and wire diameter of 540 nm has a 72.4% higher ultimate efficiency than a Si thin film of equal thickness. The enhancement effect can be maintained over a large range of incidence angles.

Materials Science Forum

Abstract: Properties and Application of Geopolymers Vol. 841 (/MSF.841 /book) Development and Investigation of Materials Using Modern Techniques Vol. 840 (/MSF.840/book) Superplasticity in Advanced Materials ICSAM 2015 Vols. 838-839 (/MSF.838-839/book) 12th International Conference on High Speed Machining Vols. 836-837 (/MSF.836-837/book) Sintering Fundamentals II Vol. 835 (/MSF.835/book) Advanced Machining Technologies: Traditions and Innovations Vol. 834 (/MSF.834/book) Applied Materials and Technologies Vol. 833 (/MSF.833/book) Emerging Functional Materials: Book (/MSF.841/book) Papers (/MSF.841)