William A. Nack

Bio: William A. Nack is an academic researcher from Pennsylvania State University. The author has contributed to research in topics: Amination & Alkyl. The author has an hindex of 18, co-authored 39 publications receiving 2323 citations.

Syntheses and Transformations of α-Amino Acids via Palladium-Catalyzed Auxiliary-Directed sp3 C–H Functionalization

Abstract: α-Amino acids (αAA) are one of the most useful chiral building blocks for synthesis. There are numerous general strategies that have commonly been used for αAA synthesis, many of which employ de novo synthesis focused on enantioselective bond construction around the Cα center and others that consider conversion of existing αAA precursors carrying suitable functional groups on side chains (e.g., serine and aspartic acid). Despite significant advances in synthetic methodology, the efficient synthesis of enantiopure αAAs carrying complex side chains, as seen in numerous peptide natural products, remains challenging. Complementary to these "conventional" strategies, a strategy based on the selective functionalization of side chain C-H bonds, particularly sp(3) hybridized C-H bonds, of various readily available αAA precursors may provide a more straightforward and broadly applicable means for the synthesis and transformation of αAAs. However, many hurdles related to the low reactivity of C(sp(3))-H bonds and the difficulty of controlling selectivity must be overcome to realize the potential of C-H functionalization chemistry in this synthetic application. Over the past few years, we have carried out a systematic investigation of palladium-catalyzed bidentate auxiliary-directed C-H functionalization reactions for αAA substrates. Our strategies utilize two different types of amide-linked auxiliary groups, attached at the N or C terminus of αAA substrates, to exert complementary regio- and stereocontrol on C-H functionalization reactions through palladacycle intermediates. A variety of αAA precursors can undergo multiple modes of C(sp(3))-H functionalization, including arylation, alkenylation, alkynylation, alkylation, alkoxylation, and intramolecular aminations, at the β, γ, and even δ positions to form new αAA products with diverse structures. In addition to transforming αAAs at previously unreachable positions, these palladium-catalyzed C-H functionalization strategies enable new retrosynthetic logic for the synthesis of many basic αAAs from a common alanine precursor. This approach reduces the synthetic difficulty for many αAAs by bypassing the requirement for stereocontrol at Cα and relies on straightforward and convergent single-bond coupling transformations at the β-methyl position of alanine to access a wide range of β-monosubstituted αAAs. Moreover, these β-monosubstituted αAAs can undergo further C-H functionalization at the β-methylene position to generate various β-branched αAAs in a stereoselective and programmable fashion. These new strategies offer readily applicable methods for synthesis of challenging αAAs and may facilitate the efficient total synthesis of complex peptide natural products.

Palladium-Catalyzed Picolinamide-Directed Alkylation of Unactivated C(sp3)–H Bonds with Alkyl Iodides

Abstract: We report an efficient method for the alkylation of γ-C(sp3)–H bonds of picolinamide-protected aliphatic amine substrates with primary alkyl iodides via palladium catalysis. Ag2CO3 and dibenzyl phosphate, (BnO)2PO2H, are critical promoters of this reaction. These reactions provide a convenient and straightforward method for the preparation of high-value N-containing products from readily available amine and alkyl iodide precursors.

Efficient Alkyl Ether Synthesis via Palladium-Catalyzed, Picolinamide-Directed Alkoxylation of Unactivated C(sp3)–H and C(sp2)–H Bonds at Remote Positions

Abstract: We report the efficient synthesis of alkyl ethers by the functionalization of unactivated sp3- and sp2-hybridized C–H bonds. In the Pd(OAc)2-catalyzed, PhI(OAc)2-mediated reaction system, picolinamide-protected amine substrates undergo facile alkoxylation at the γ or δ positions with a range of alcohols, including t-BuOH, to give alkoxylated products. This method features a relatively broad substrate scope for amines and alcohols, inexpensive reagents, and convenient operating conditions. This method highlights the emerging value of unactivated C–H bonds, particularly the C(sp3)–H bond of methyl groups, as functional groups in organic synthesis.

Stereoselective Synthesis of β-Alkylated α-Amino Acids via Palladium-Catalyzed Alkylation of Unactivated Methylene C(sp3)–H Bonds with Primary Alkyl Halides

Abstract: We report a new set of reactions based on the Pd-catalyzed alkylation of methylene C(sp3)–H bonds of aliphatic quinolyl carboxamides with α-haloacetate and methyl iodide and applications in the stereoselective synthesis of various β-alkylated α-amino acids. These reactions represent the first generally applicable method for the catalytic alkylation of unconstrained and unactivated methylene C–H bonds with high synthetic relevance. When applied with simple isotope-enriched reagents, they also provide a convenient and powerful means to site-selectively incorporate isotopes into the carbon scaffolds of amino acid compounds.

Use of a Readily Removable Auxiliary Group for the Synthesis of Pyrrolidones by the Palladium‐Catalyzed Intramolecular Amination of Unactivated γ C(sp3) ? H Bonds

Abstract: Easy on, easy off: Directing groups found to promote the palladium-catalyzed amination of γ C(sp(3) )H and C(sp(2) )H bonds of secondary amides included 5-methoxy-8-aminoquinoline, which can be removed under mild conditions (see scheme; CAN=ceric ammonium nitrate). In conjunction with a β-CH methylation or γ-CH arylation step, the γ-C(sp(3) )H amination provided access to complex pyrrolidones from readily available precursors.

Catalytic Functionalization of C(sp2) ? H and C(sp3) ? H Bonds by Using Bidentate Directing Groups

Abstract: C-H bonds are ubiquitous in organic compounds. It would, therefore, appear that direct functionalization of substrates by activation of C-H bonds would eliminate the multiple steps and limitations associated with the preparation of functionalized starting materials. Regioselectivity is an important issue because organic molecules can contain a wide variety of C-H bonds. The use of a directing group can largely overcome the issue of regiocontrol by allowing the catalyst to come into proximity with the targeted C-H bonds. A wide variety of functional groups have been evaluated for use as directing groups in the transformation of C-H bonds. In 2005, Daugulis reported the arylation of unactivated C(sp(3))-H bonds by using 8-aminoquinoline and picolinamide as bidentate directing groups, with Pd(OAc)2 as the catalyst. Encouraged by these promising results, a number of transformations of C-H bonds have since been developed by using systems based on bidentate directing groups. In this Review, recent advances in this area are discussed.

Transition Metal-Catalyzed C–H Amination: Scope, Mechanism, and Applications

Abstract: Catalytic transformation of ubiquitous C–H bonds into valuable C–N bonds offers an efficient synthetic approach to construct N-functionalized molecules. Over the last few decades, transition metal catalysis has been repeatedly proven to be a powerful tool for the direct conversion of cheap hydrocarbons to synthetically versatile amino-containing compounds. This Review comprehensively highlights recent advances in intra- and intermolecular C–H amination reactions utilizing late transition metal-based catalysts. Initial discovery, mechanistic study, and additional applications were categorized on the basis of the mechanistic scaffolds and types of reactions. Reactivity and selectivity of novel systems are discussed in three sections, with each being defined by a proposed working mode.

3d Transition Metals for C-H Activation.

Abstract: C–H activation has surfaced as an increasingly powerful tool for molecular sciences, with notable applications to material sciences, crop protection, drug discovery, and pharmaceutical industries, among others. Despite major advances, the vast majority of these C–H functionalizations required precious 4d or 5d transition metal catalysts. Given the cost-effective and sustainable nature of earth-abundant first row transition metals, the development of less toxic, inexpensive 3d metal catalysts for C–H activation has gained considerable recent momentum as a significantly more environmentally-benign and economically-attractive alternative. Herein, we provide a comprehensive overview on first row transition metal catalysts for C–H activation until summer 2018.

Palladium-Catalyzed Transformations of Alkyl C-H Bonds.

Abstract: This Review summarizes the advancements in Pd-catalyzed C(sp3)–H activation via various redox manifolds, including Pd(0)/Pd(II), Pd(II)/Pd(IV), and Pd(II)/Pd(0). While few examples have been reported in the activation of alkane C–H bonds, many C(sp3)–H activation/C–C and C–heteroatom bond forming reactions have been developed by the use of directing group strategies to control regioselectivity and build structural patterns for synthetic chemistry. A number of mono- and bidentate ligands have also proven to be effective for accelerating C(sp3)–H activation directed by weakly coordinating auxiliaries, which provides great opportunities to control reactivity and selectivity (including enantioselectivity) in Pd-catalyzed C–H functionalization reactions.

Transition metal-catalyzed C–H bond functionalizations by the use of diverse directing groups

Abstract: Transition metal-catalyzed direct functionalization of C–H bonds is one of the key emerging strategies that is currently attracting tremendous attention with the aim to provide alternative environmentally friendly and efficient ways for the construction of C–C and C–hetero bonds. In particular, the strategy involving regioselective C–H activation assisted by various functional groups shows high potential, and significant achievements have been made in both the development of novel reactions and the mechanistic study. In this review, we attempt to give an overview of the development of utilizing the functionalities as directing groups. The discussion is directed towards the use of different functional groups as directing groups for the construction of C–C and C–hetero bonds via C–H activation using various transition metal catalysts. The synthetic applications and mechanistic features of these transformations will be discussed, and the review is organized on the basis of the type of directing groups and the type of bond being formed or the catalyst.