Wounjhang Park

Bio: Wounjhang Park is an academic researcher from University of Colorado Boulder. The author has contributed to research in topics: Photonic crystal & Plasmon. The author has an hindex of 33, co-authored 189 publications receiving 4419 citations. Previous affiliations of Wounjhang Park include Georgia Tech Research Institute & Georgia Institute of Technology.

Flexible thin-film black gold membranes with ultrabroadband plasmonic nanofocusing for efficient solar vapour generation

Abstract: Efficient steam generation under solar irradiation is of interest for energy harvesting applications. Here, Bae et al. develop a plasmonic nanofocusing film consisting of metal coated alumina nanowires to efficiently generate solar vapour with an efficiency up to 57% at 20 kWm−2.

Plasmon enhancement of luminescence upconversion

Abstract: Frequency conversion has always been an important topic in optics. Nonlinear optics has traditionally focused on frequency conversion based on nonlinear susceptibility but with the recent development of upconversion nanomaterials, luminescence upconversion has begun to receive renewed attention. While upconversion nanomaterials open doors to a wide range of new opportunities, they remain too inefficient for most applications. Incorporating plasmonic nanostructures provides a promising pathway to highly efficient upconversion. Naturally, a plethora of theoretical and experimental studies have been published in recent years, reporting enhancements up to several hundred. It is however difficult to make meaningful comparisons since the plasmonic fields are highly sensitive to the local geometry and excitation condition. Also, many luminescence upconversion processes involve multiple steps via different physical mechanisms and the overall output is often determined by a delicate interplay among them. This review is aimed at offering a comprehensive framework for plasmon enhanced luminescence upconversion. We first present quantum electrodynamics descriptions for all the processes involved in luminescence upconversion, which include absorption, emission, energy transfer and nonradiative transitions. We then present a bird's eye view of published works on plasmon enhanced upconversion, followed by more detailed discussion on comparable classes of nanostructures, the effects of spacer layers and local heating, and the dynamics of the plasmon enhanced upconversion process. Plasmon enhanced upconversion is a challenging and exciting field from the fundamental scientific perspective and also from technological standpoints. It offers an excellent system to study how optical processes are affected by the local photonic environment. This type of research is particularly timely as the plasmonics is placing heavier emphasis on nonlinearity. At the same time, efficient upconversion could make a significant impact on many applications including solar energy conversion and biomedical imaging. The marriage of luminescent materials research with nanophotonics currently being initiated with plasmon enhanced upconversion research explores a new frontier in photonics that could potentially spawn many exciting new fields.

Photoluminescence properties of ZnS epilayers

Abstract: A comprehensive study is reported of the photoluminescence properties of ZnS thin films between 1.6 and 320 K grown by metalorganic molecular beam epitaxy and chemical beam epitaxy on GaAs substrates. Both heavy- and light-hole free excitons were observed at low temperatures with linewidths of 7.0 and 5.3 meV, respectively, as well as donor- and acceptor-bound excitons and free-to-bound recombination along with their longitudinal optical (LO) phonon replicas. The free exciton emission was observed up to 320 K, and enabled the room temperature band gap of ZnS to be unambiguously determined as 3.723 eV. The temperature dependence of the peak position, intensity, and linewidth was well described by the conventional empirical relations and by Toyozawa’s exciton line shape theory. The bound exciton peak positions were found to follow the temperature dependence of the band gap whereas the free-to-bound recombination feature was displaced by (1/2)kT above the band gap energy. Thermal quenching of the donor-bound...

Plasmon Enhancement Mechanism for the Upconversion Processes in NaYF4:Yb3+,Er3+ Nanoparticles: Maxwell versus Förster

Abstract: Rare-earth activated upconversion materials are receiving renewed attention for their potential applications in bioimaging and solar energy conversion. To enhance the upconversion efficiency, surface plasmon has been employed but the reported enhancements vary widely and the exact enhancement mechanisms are not clearly understood. In this study, we synthesized upconversion nanoparticles (UCNPs) coated with amphiphilic polymer which makes UCNPs water soluble and negatively charged. We then designed and fabricated a silver nanograting on which three monolayers of UCNPs were deposited by polyelectrolyte-mediated layer-by-layer deposition technique. The final structures exhibited surface plasmon resonance at the absorption wavelength of UCNP. The green and red photoluminescence intensity of UCNPs on nanograting was up to 16 and 39 times higher than the reference sample deposited on flat silver film, respectively. A thorough analysis of rate equations showed that the enhancement was due entirely to absorption ...

Mechanically tunable photonic crystal structure

Abstract: We report a tunable nanophotonic device concept based on flexible photonic crystal, which is comprised of a periodic array of high-index dielectric material and a low-index flexible polymer. Tunability is achieved by applying mechanical force with nano-/microelectromechanical system actuators. The mechanical stress induces changes in the periodicity of the photonic crystal and consequently modifies the photonic band structure. To demonstrate the concept, we theoretically investigated the effect of mechanical stress on the anomalous refraction behavior and observed a very wide tunability in the beam propagation direction. This concept provides a means to achieve real-time, dynamic control of photonic band structure and will thus expand the utility of photonic crystal structures in advanced nanophotonic systems.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process

Abstract: Atomic layer deposition(ALD), a chemical vapor deposition technique based on sequential self-terminating gas–solid reactions, has for about four decades been applied for manufacturing conformal inorganic material layers with thickness down to the nanometer range. Despite the numerous successful applications of material growth by ALD, many physicochemical processes that control ALD growth are not yet sufficiently understood. To increase understanding of ALD processes, overviews are needed not only of the existing ALD processes and their applications, but also of the knowledge of the surface chemistry of specific ALD processes. This work aims to start the overviews on specific ALD processes by reviewing the experimental information available on the surface chemistry of the trimethylaluminum/water process. This process is generally known as a rather ideal ALD process, and plenty of information is available on its surface chemistry. This in-depth summary of the surface chemistry of one representative ALD process aims also to provide a view on the current status of understanding the surface chemistry of ALD, in general. The review starts by describing the basic characteristics of ALD, discussing the history of ALD—including the question who made the first ALD experiments—and giving an overview of the two-reactant ALD processes investigated to date. Second, the basic concepts related to the surface chemistry of ALD are described from a generic viewpoint applicable to all ALD processes based on compound reactants. This description includes physicochemical requirements for self-terminating reactions,reaction kinetics, typical chemisorption mechanisms, factors causing saturation, reasons for growth of less than a monolayer per cycle, effect of the temperature and number of cycles on the growth per cycle (GPC), and the growth mode. A comparison is made of three models available for estimating the sterically allowed value of GPC in ALD. Third, the experimental information on the surface chemistry in the trimethylaluminum/water ALD process are reviewed using the concepts developed in the second part of this review. The results are reviewed critically, with an aim to combine the information obtained in different types of investigations, such as growth experiments on flat substrates and reaction chemistry investigation on high-surface-area materials. Although the surface chemistry of the trimethylaluminum/water ALD process is rather well understood, systematic investigations of the reaction kinetics and the growth mode on different substrates are still missing. The last part of the review is devoted to discussing issues which may hamper surface chemistry investigations of ALD, such as problematic historical assumptions, nonstandard terminology, and the effect of experimental conditions on the surface chemistry of ALD. I hope that this review can help the newcomer get acquainted with the exciting and challenging field of surface chemistry of ALD and can serve as a useful guide for the specialist towards the fifth decade of ALD research.