Xi Shen

Bio: Xi Shen is an academic researcher from Hong Kong University of Science and Technology. The author has contributed to research in topics: Graphene & Graphene foam. The author has an hindex of 33, co-authored 62 publications receiving 4608 citations. Previous affiliations of Xi Shen include Tongji University & Hong Kong Polytechnic University.

Highly aligned graphene/polymer nanocomposites with excellent dielectric properties for high-performance electromagnetic interference shielding.

Abstract: Nanocomposites that contain reinforcements with preferred orientation have attracted significant attention because of their promising applications in a wide range of multifunctional fields. Many efforts have recently been focused on developing facile methods for preparing aligned graphene sheets in solvents and polymers because of their fascinating properties including liquid crystallinity and highly anisotropic characteristics. Self-aligned in situ reduced graphene oxide (rGO)/polymer nanocomposites are prepared using an all aqueous casting method. A remarkably low percolation threshold of 0.12 vol% is achieved in the rGO/epoxy system owing to the uniformly dispersed, monolayer graphene sheets with extremely high aspect ratios (>30000). The self-alignment into a layered structure at above a critical filler content induces a unique anisotropy in electrical and mechanical properties due to the preferential formation of conductive and reinforcing networks along the alignment direction. Accompanied by the anisotropic electrical conductivities are exceptionally high dielectric constants of over 14000 with 3 wt% of rGO at 1 kHz due to the charge accumulation at the highly-aligned conductive filler/insulating polymer interface according to the Maxwell-Wagner-Sillars polarization principle. The highly dielectric rGO/epoxy nanocomposites with the engineered structure and properties present high performance electromagnetic interference shielding with a remarkable shilding efficiency of 38 dB.

Ultralight Graphene Foam/Conductive Polymer Composites for Exceptional Electromagnetic Interference Shielding

Abstract: Ultralight, high-performance electromagnetic interference (EMI) shielding graphene foam (GF)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composites are developed by drop coating of PEDOT:PSS on cellular-structured, freestanding GFs. To enhance the wettability and the interfacial bonds with PEDOT:PSS, GFs are functionalized with 4-dodecylbenzenesulfonic acid. The GF/PEDOT:PSS composites possess an ultralow density of 18.2 × 10–3 g/cm3 and a high porosity of 98.8%, as well as an enhanced electrical conductivity by almost 4 folds from 11.8 to 43.2 S/cm after the incorporation of the conductive PEDOT:PSS. Benefiting from the excellent electrical conductivity, ultralight porous structure, and effective charge delocalization, the composites deliver remarkable EMI shielding performance with a shielding effectiveness (SE) of 91.9 dB and a specific SE (SSE) of 3124 dB·cm3/g, both of which are the highest among those reported in the literature for carbon-based polymer composites. The excelle...

Fabrication of Highly-aligned, Conductive, and Strong Graphene Papers Using Ultralarge Graphene Oxide Sheets

Abstract: This study demonstrates that large-size graphene oxide (GO) sheets can impart a tremendous positive impact on self-alignment, electrical conductivity, and mechanical properties of graphene papers. There is a remarkable, more than 3-fold improvement in electrical conductivity of the papers made from ultralarge GO sheets (with an average area of 272.2 μm2) compared to that of the small GO counterpart (with an average area of 1.1 μm2). The corresponding improvements in Young’s modulus and tensile strength are equally notable, namely 320% and 280%, respectively. These improvements of bulk properties due to the large GO sheets are correlated to multiscale elemental and structural characteristics of GO sheets, such as the content of carboxyl groups on the GO edge, C/O ratio and Raman D/G-band intensity ratio of GO on the molecular-scale, and the degree of dispersion and stacking behavior of GO sheets on the microscale. The graphene papers made from larger GO sheets exhibit a closer-stacked structure and better ...

Exceptional Electrical Conductivity and Fracture Resistance of 3D Interconnected Graphene Foam/Epoxy Composites

Abstract: Cellular-structured graphene foam (GF)/epoxy composites are prepared based on a three-step fabrication process involving infiltration of epoxy into the porous GF. The three-dimensional (3D) GF is grown on a Ni foam template via chemical vapor deposition. The 3D interconnected graphene network serves as fast channels for charge carriers, giving rise to a remarkable electrical conductivity of the composite, 3 S/cm, with only 0.2 wt % GF. The corresponding flexural modulus and strength increase by 53 and 38%, respectively, whereas the glass transition temperature increases by a notable 31 °C, compared to the solid neat epoxy. The GF/epoxy composites with 0.1 wt % GF also deliver an excellent fracture toughness of 1.78 MPa·m1/2, 34 and 70% enhancements against their “porous” epoxy and solid epoxy counterparts, respectively. These observations signify the unrivalled effectiveness of 3D GF relative to 1D carbon nanotubes or 2D functionalized graphene sheets as reinforcement for polymer composites without issues...

Multilayer Graphene Enables Higher Efficiency in Improving Thermal Conductivities of Graphene/Epoxy Composites

Abstract: The effects of number of graphene layers (n) and size of multilayer graphene sheets on thermal conductivities (TCs) of their epoxy composites are investigated. Molecular dynamics simulations show that the in-plane TCs of graphene sheets and the TCs across the graphene/epoxy interface simultaneously increase with increasing n. However, such higher TCs of multilayer graphene sheets will not translate into higher TCs of bulk composites unless they have large lateral sizes to maintain their aspect ratios comparable to the monolayer counterparts. The benefits of using large, multilayer graphene sheets are confirmed by experiments, showing that the composites made from graphite nanoplatelets (n > 10) with over 30 μm in diameter deliver a TC of ∼1.5 W m–1 K–1 at only 2.8 vol %, consistently higher than those containing monolayer or few-layer graphene at the same graphene loading. Our findings offer a guideline to use cost-effective multilayer graphene as conductive fillers for various thermal management applicat...

Electromagnetic interference shielding with 2D transition metal carbides (MXenes)

Abstract: Materials with good flexibility and high conductivity that can provide electromagnetic interference (EMI) shielding with minimal thickness are highly desirable, especially if they can be easily processed into films. Two-dimensional metal carbides and nitrides, known as MXenes, combine metallic conductivity and hydrophilic surfaces. Here, we demonstrate the potential of several MXenes and their polymer composites for EMI shielding. A 45-micrometer-thick Ti3C2Tx film exhibited EMI shielding effectiveness of 92 decibels (>50 decibels for a 2.5-micrometer film), which is the highest among synthetic materials of comparable thickness produced to date. This performance originates from the excellent electrical conductivity of Ti3C2Tx films (4600 Siemens per centimeter) and multiple internal reflections from Ti3C2Tx flakes in free-standing films. The mechanical flexibility and easy coating capability offered by MXenes and their composites enable them to shield surfaces of any shape while providing high EMI shielding efficiency.

Broadband and Tunable High‐Performance Microwave Absorption of an Ultralight and Highly Compressible Graphene Foam

Abstract: The broadband and tunable high-performance microwave absorption properties of an ultralight and highly compressible graphene foam (GF) are investigated. Simply via physical compression, the microwave absorption performance can be tuned. The qualified bandwidth coverage of 93.8% (60.5 GHz/64.5 GHz) is achieved for the GF under 90% compressive strain (1.0 mm thickness). This mainly because of the 3D conductive network.

Intrinsic ripples in graphene

Abstract: The stability of two-dimensional (2D) layers and membranes is subject of a long standing theoretical debate. According to the so called Mermin-Wagner theorem, long wavelength fluctuations destroy the long-range order for 2D crystals. Similarly, 2D membranes embedded in a 3D space have a tendency to be crumpled. These dangerous fluctuations can, however, be suppressed by anharmonic coupling between bending and stretching modes making that a two-dimensional membrane can exist but should present strong height fluctuations. The discovery of graphene, the first truly 2D crystal and the recent experimental observation of ripples in freely hanging graphene makes these issues especially important. Beside the academic interest, understanding the mechanisms of stability of graphene is crucial for understanding electronic transport in this material that is attracting so much interest for its unusual Dirac spectrum and electronic properties. Here we address the nature of these height fluctuations by means of straightforward atomistic Monte Carlo simulations based on a very accurate many-body interatomic potential for carbon. We find that ripples spontaneously appear due to thermal fluctuations with a size distribution peaked around 70 \AA which is compatible with experimental findings (50-100 \AA) but not with the current understanding of stability of flexible membranes. This unexpected result seems to be due to the multiplicity of chemical bonding in carbon.

Hydrophobic, Flexible, and Lightweight MXene Foams for High-Performance Electromagnetic-Interference Shielding

Abstract: Ultrathin, lightweight, and flexible electromagnetic-interference (EMI) shielding materials are urgently required to manage increasingly serious radiation pollution. 2D transition-metal carbides (MXenes) are considered promising alternatives to graphene for providing excellent EMI-shielding performance due to their outstanding metallic electrical conductivity. However, the hydrophilicity of MXene films may affect their stability and reliability when applied in moist or wet environments. Herein, for the first time, an efficient and facile approach is reported to fabricate freestanding, flexible, and hydrophobic MXene foam with reasonable strength by assembling MXene sheets into films followed by a hydrazine-induced foaming process. In striking contrast to well-known hydrophilic MXene materials, the MXene foams surprisingly exhibit hydrophobic surfaces and outstanding water resistance and durability. More interestingly, a much enhanced EMI-shielding effectiveness of ≈70 dB is achieved for the lightweight MXene foam as compared to its unfoamed film counterpart (53 dB) due to the highly efficient wave attenuation in the favorable porous structure. Therefore, the hydrophobic, flexible, and lightweight MXene foam with an excellent EMI-shielding performance is highly promising for applications in aerospace and portable and wearable smart electronics.