Oxygen vacancy (O-vacancy) is essential in catalytic oxidation but little is known about its insight. Herein, a series of MnOx-CeO2 catalysts with various Mn/(Mn + Ce) molar ratios were synthesized with citric acid complex method for O-vacancy study in soot catalytic combustion. The samples were characterized by X-ray powder diffraction (XRD), N2 adsorption/desorption, O2-temperature programmed desorption (O2-TPD), H2-temperature programmed reduction (H2-TPR), X-ray photoelectron spectroscopy (XPS) and in situ Raman spectroscopy. It has been shown that MnOx(0.4)-CeO2 catalyst presented more O-vacancies, thus exhibiting the highest catalytic activities and redox properties. With the utilization of in situ Raman, two types of O-vacancies, including Frenkel-type oxygen vacancy (F OV) and intrinsic oxygen vacancy (I OV), were clarified. Furthermore, the transform relation between F OV and I OV was found. Those two types of O-vacancies favored to the migration and transformation of active species, enhancing further the oxidation-reduction cycle and the catalytic activity for soot oxidation. In addition, Mn4+/Mn3+(Mn2+), Olatt, Osur and Ce4+/Ce3+ were believed to play important roles in soot oxidation. Finally, evolution of O-vacancies was proposed, which is of significance for soot catalytic oxidation.

Evolution of oxygen vacancies in MnOx-CeO2 mixed oxides for soot oxidation

Two different techniques (precipitation with ammonia and hydrothermal synthesis with ethylene glycol, both followed by autoclave aging) were employed for the synthesis of CeO2–ZrO2 mixed oxides on a 80–20 wt.% basis. Aging parameters, such as time and temperature, were systematically investigated in order to determine the optimal conditions to maintain high surface area and oxygen mobility of the prepared solids. Different loadings of nickel and cobalt (3, 6, 12 and 18 wt.%) were subsequently deposited via homogeneous deposition precipitation method. Calcined bimetallic catalysts were characterized by N2 adsorption–desorption, XRD, H2-TPR, TPO-TGA and FE-SEM methods, and tested for activity, selectivity and stability in the reforming of equimolar CH4–CO2 gas streams. During temperature programmed methane reforming tests, syngas with a H2/CO ratio between 0.3 and 0.79 was produced. Growth of carbon nanofilaments over the catalyst does not lead to deactivation, but can cause reactor plugging. Two conditions are vital and must be fulfilled simultaneously to avoid excessive carbon deposition: strong interaction between the NiCo bimetallic particles and CeZr support, which exists only at NiCo loadings up to 6 wt.%, as well as high oxygen mobility within the highly defective CeO2–ZrO2 crystalline lattice for timely carbon oxidation.

Influence of active metal loading and oxygen mobility on coke-free dry reforming of Ni–Co bimetallic catalysts

A review on oxygen storage capacity of CeO2-based materials: Influence factors, measurement techniques, and applications in reactions related to catalytic automotive emissions control

Ceria-based catalysts for soot oxidation: a review

Surface species and oxygen vacancies were studied in MnO x (0.4)-CeO 2 toward repeated soot oxidation. MnO x (0.4)-CeO 2 catalysts prepared by the citric acid complex method were repeatedly used in a 10% O 2 /Ar gas flow and showed favorable activity and satisfactory durability toward soot oxidation. X-ray diffraction (XRD), N 2 adsorption/desorption, Electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS) and in situ visible/UV Raman characterization methods were utilized to investigate the structural features of fresh and reused catalysts. The irreversible conversion of high valence manganese species as well as the reduction of Frenkel-type oxygen vacancies and lattice oxygen could be clearly observed in the reused samples, which were associated with the slight deactivation. Spectators and participators were two existing forms of Frenkel-type oxygen vacancies. It was noteworthy that the participators almost fully regenerated after each reaction cycle, which ensured the ability to activate O latt in repeated soot oxidation process. Therefore, the catalysts maintained favorable activity and satisfactory durability, which was mainly because the relatively stable level of participators.

Xianghui Yue

Papers

Soot oxidation via CuO doped CeO2 catalysts prepared using coprecipitation and citrate acid complex-combustion synthesis