Xiao-Hua Qin

Bio: Xiao-Hua Qin is an academic researcher from ETH Zurich. The author has contributed to research in topics: Self-healing hydrogels & Photopolymer. The author has an hindex of 17, co-authored 34 publications receiving 1178 citations. Previous affiliations of Xiao-Hua Qin include Swiss Federal Laboratories for Materials Science and Technology & Peking University.

Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix

Abstract: The natural extracellular matrix (ECM) represents a complex and dynamic environment. It provides numerous spatio-temporal signals mediating many cellular functions including morphogenesis, adhesion, proliferation and differentiation. The cell–ECM interaction is bidirectional. Cells dynamically receive and process information from the ECM and remodel it at the same time. Theses complex interactions are still not fully understood. For better understanding, it is indispensable to deconstruct the ECM up to the point of investigating isolated characteristics and cell responses to physical, chemical and topographical cues. Two-photon polymerization (2PP) allows the exact reconstruction of cell specifi c sites in 3D at micro- and nanometer precision. Processing biocompatible synthetic and naturally-derived hydrogels, the microenvironment of cells can be designed to specifi cally investigate their behavior in respect to key chemical, mechanical and topographical attributes. Moreover, 3D manipulation can be performed in the presence of cells, guiding biological tissue formation in all stages of its development. Here, advances in 2PP microfabrication of synthetic and naturally based hydrogels are reviewed. Key components of photopolymerizable hydrogel precursors, their structure–property relationships and their polymerization mechanisms are presented. Furthermore, it is shown how biocompatible 2PP fabricated constructs can act as biologically relevant matrices to study cell functions and tissue development.

Laser Photofabrication of Cell-Containing Hydrogel Constructs

Abstract: The two-photon polymerization (2PP) of photosensitive gelatin in the presence of living cells is reported. The 2PP technique is based on the localized cross-linking of photopolymers induced by femtosecond laser pulses. The availability of water-soluble photoinitiators (PI) suitable for 2PP is crucial for applying this method to cell-containing materials. Novel PIs developed by our group allow 2PP of formulations with up to 80% cell culture medium. The cytocompatibility of these PIs was evaluated by an MTT assay. The results of cell encapsulation by 2PP show the occurrence of cell damage within the laser-exposed regions. However, some cells located in the immediate vicinity and even within the 2PP-produced structures remain viable and can further proliferate. The control experiments demonstrate that the laser radiation itself does not damage the cells at the parameters used for 2PP. On the basis of these findings and the reports by other groups, we conclude that such localized cell damage is of a chemical origin and can be attributed to reactive species generated during 2PP. The viable cells trapped within the 2PP structures but not exposed to laser radiation continued to proliferate. The live/dead staining after 3 weeks revealed viable cells occupying most of the space available within the 3D hydrogel constructs. While some of the questions raised by this study remain open, the presented results indicate the general practicability of 2PP for 3D processing of cell-containing materials. The potential applications of this highly versatile approach span from precise engineering of 3D tissue models to the fabrication of cellular microarrays.

Photo-sensitive hydrogels for three-dimensional laser microfabrication in the presence of whole organisms.

Abstract: Hydrogels are polymeric materials with water contents similar to that of soft tissues. Due to their biomimetic properties, they have been extensively used in various biomedical applications including cell encapsulation for tissue engineering. The utilization of photopolymers provides a possibility for the temporal and spatial controlling of hydrogel cross-links. We produced three-dimensional (3-D) hydrogel scaffolds by means of the two-photon polymerization (2PP) technique. Using a highly efficient water-soluble initiator, photopolymers with up to 80 wt.% water were processed with high precision and reproducibility at a writing speed of 10 mm/s . The biocompatibility of the applied materials was verified using Caenorhabditis elegans as living test organisms. Furthermore, these living organisms were successfully embedded within a 200×200×35 μm 3 hydrogel scaffold. As most biologic tissues exhibit a window of transparency at the wavelength of the applied femtosecond laser, it is suggested that 2PP is promising for an in situ approach. Our results demonstrate the feasibility of and potential for bio-fabricating 3-D tissue constructs in the micrometre-range via near-infrared lasers in direct contact with a living organism.

Polymers for 3D Printing and Customized Additive Manufacturing

Abstract: Additive manufacturing (AM) alias 3D printing translates computer-aided design (CAD) virtual 3D models into physical objects. By digital slicing of CAD, 3D scan, or tomography data, AM builds objects layer by layer without the need for molds or machining. AM enables decentralized fabrication of customized objects on demand by exploiting digital information storage and retrieval via the Internet. The ongoing transition from rapid prototyping to rapid manufacturing prompts new challenges for mechanical engineers and materials scientists alike. Because polymers are by far the most utilized class of materials for AM, this Review focuses on polymer processing and the development of polymers and advanced polymer systems specifically for AM. AM techniques covered include vat photopolymerization (stereolithography), powder bed fusion (SLS), material and binder jetting (inkjet and aerosol 3D printing), sheet lamination (LOM), extrusion (FDM, 3D dispensing, 3D fiber deposition, and 3D plotting), and 3D bioprinting....

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Abstract: Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.

Molecular mechanism mediating proliferation, defferentiation interralationships during progressie development of the osteoblast phenotype

Abstract: I. Introduction A FUNCTIONAL relationship between cell growth and the initiation and progression of events associated with differentiation has been a fundamental question challenging developmental biologists for more than a century. In the case of bone, as observed with other cells and tissue, the relationship of growth and differentiation must be maintained and stringently regulated, both during development and throughout the life of the organism, to support tissue remodeling. For many years, bone was defined anatomically and examined largely in a descriptive manner by ultrastructural analysis and by biochemical and histochemical methods. These studies provided the basis for our understanding of bone tissue organization and orchestration of the progressive recruitment, proliferation, and differentiation of the various cellular components of bone tissue. Now, complemented by an increased knowledge of molecular mechanisms that are associated with and regulate expression of genes encoding phenotypic compone...