The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

Ultracapacitors: Why, How, and Where is the Technology

Pyrolysis is one of the thermochemical technologies for converting biomass into energy and chemical products consisting of liquid bio-oil, solid biochar, and pyrolytic gas. Depending on the heating rate and residence time, biomass pyrolysis can be divided into three main categories slow (conventional), fast and flash pyrolysis mainly aiming at maximising either the bio-oil or biochar yields. Synthesis gas or hydrogen-rich gas can also be the target of biomass pyrolysis. Maximised gas rates can be achieved through the catalytic pyrolysis process, which is now increasingly being developed. Biomass pyrolysis generally follows a three-step mechanism comprising of dehydration, primary and secondary reactions. Dehydrogenation, depolymerisation, and fragmentation are the main competitive reactions during the primary decomposition of biomass. A number of parameters affect the biomass pyrolysis process, yields and properties of products. These include the biomass type, biomass pretreatment (physical, chemical, and biological), reaction atmosphere, temperature, heating rate and vapour residence time. This manuscript gives a general summary of the properties of the pyrolytic products and their analysis methods. Also provided are a review of the parameters that affect biomass pyrolysis and a summary of the state of industrial pyrolysis technologies.

Lignocellulosic biomass pyrolysis: A review of product properties and effects of pyrolysis parameters

Porous carbons have several advantageous properties with respect to their use in energy applications that require constrained space such as in electrode materials for supercapacitors and as solid state hydrogen stores. The attractive properties of porous carbons include, ready abundance, chemical and thermal stability, ease of processability and low framework density. Activated carbons, which are perhaps the most explored class of porous carbons, have been traditionally employed as catalyst supports or adsorbents, but lately they are increasingly being used or find potential applications in the fabrication of supercapacitors and as hydrogen storage materials. This manuscript presents the state-of-the-art with respect to the preparation of activated carbons, with emphasis on the more interesting recent developments that allow better control or maximization of porosity, the use of cheap and readily available precursors and tailoring of morphology. This review will show that the renewed interest in the synthesis of activated carbons is matched by intensive investigations into their use in supercapacitors, where they remain the electrode materials of choice. We will also show that activated carbons have been extensively studied as hydrogen storage materials and remain a strong candidate in the search for porous materials that may enable the so-called Hydrogen Economy, wherein hydrogen is used as an energy carrier. The use of activated carbons as energy materials has in the recent past and is currently experiencing rapid growth, and this review aims to present the more significant advances.

/pdf/energy-storage-applications-of-activated-carbons-2ct4qm4ni4.pdf

Energy storage applications of activated carbons: supercapacitors and hydrogen storage

Biomass can be utilized to produce bio-oil, a promising alternative energy source for the limited crude oil. There are mainly two processes involved in the conversion of biomass to bio-oil: flash pyrolysis and hydrothermal liquefaction. The cost of bio-oil production from biomass is relatively high based on current technologies, and the main challenges are the low yield and poor bio-oil quality. Considerable research efforts have been made to improve the bio-oil production from biomass. Scientific and technical developments towards improving bio-oil yield and quality to date are reviewed, with an emphasis on bio-oil upgrading research. Furthermore, the article covers some major issues that associated with bio-oil from biomass, which includes bio-oil basics (e.g., characteristics, chemistry), application, environmental and economic assessment. It also points out barriers to achieving improvements in the future.

Bio-oil production and upgrading research: A review

The rapid depletion of conventional fossil fuels and day-by-day growth of environmental pollution due to use of extensive use of fossil fuels have raised concerns over the use of the fossil fuels; and thus search for alternate renewable and sustainable sources for fuels has started in the last few decades. In this context biomass derived fuels seems to be the promising path; and various routes are available for the biomass processing such as pyrolysis, transesterification, hydrothermal liquefaction, steam reforming, etc.; and the hydrothermal liquefaction (HTL) of wet biomass seems to be the promising route. Therefore, this article briefly enlightened a few concepts of HTL such as the elemental composition of bio-crude obtained by HTL, different types of feedstock adopted for HTL, mechanism of HTL processes, possible process flow diagrams for HTL of both wet and dry biomass and energy efficiency of the process. In addition, this article also enlisted possible future research scope for concerned researchers and a few of them are setting up HTL plant suitable for both wet and dry biomass feedstock; analysing influence of parameters such as temperature, pressure, residence time, catalytic effects, etc.; deriving optimized pathways for better conversion; and development of theoretical models representing the process to the best possible accuracy depending on nature of feedstock.

A review on hydrothermal liquefaction of biomass

Biomass gasification converts into syngas, then into other chemicals via Fischer-Tropsch (F-T) synthesis is promising for renewable energy utilization. Although gasification is a sustainable and environmental-friendly technology for value-added utilization of biomass, tar formation is the major problem during the biomass gasification. Tar could condense on the reactor then block and foul equipment. An optimized gasifier and highly active catalyst were proved to be effective for biomass tar elimination. Furthermore, tar formation mechanism and the decomposition pathway were also important to advance the optimization of gasification reactors and catalyst design. This paper summarized the fundamentals, such as gasifier types, Ni-based catalyst, and reaction and deactivation mechanism. This review also sheds light on other excellent catalysts, effective gasifiers and mathematical models of biomass catalytic gasification, and catalyst reaction mechanisms and mathematical models are also discussed in detail. At last, the paper ends with a conclusion and prospective discussion to the latter lab and industrial-scale research.

Recent advances in syngas production from biomass catalytic gasification: A critical review on reactors, catalysts, catalytic mechanisms and mathematical models

Xiao-Yan Zhao

Papers

Recent advances in syngas production from biomass catalytic gasification: A critical review on reactors, catalysts, catalytic mechanisms and mathematical models

Nitrogen transformations during fast pyrolysis of sewage sludge

Pyrolysis kinetics of soybean straw using thermogravimetric analysis

Catalytic upgrading of pyrolysis vapors from lignite over mono/bimetal-loaded mesoporous HZSM-5

In situ upgrading of Shengli lignite pyrolysis vapors over metal-loaded HZSM-5 catalyst