Xiao Zheng Zhao

Bio: Xiao Zheng Zhao is an academic researcher from The Chinese University of Hong Kong. The author has contributed to research in topics: Nanofluid & Particle. The author has an hindex of 3, co-authored 3 publications receiving 943 citations.

A benchmark study on the thermal conductivity of nanofluids

Abstract: This article reports on the International Nanofluid Property Benchmark Exercise, or INPBE, in which the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or “nanofluids,” was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady-state methods, and optical methods. The nanofluids tested in the exercise were comprised of aqueous and nonaqueous basefluids, metal and metal oxide particles, near-spherical and elongated particles, at low and high particle concentrations. The data analysis reveals that the data from most organizations lie within a relatively narrow band (±10% or less) about the sample average with only few outliers. The thermal conductivity of the nanofluids was found to increase with particle concentration and aspect ratio, as expected from classical theory. There are (small) systematic differences in the absolute values of the nanofluid thermal conductivity among the various experimental approaches; however, such differences tend to disappear when the data are normalized to the measured thermal conductivity of the basefluid. The effective medium theory developed for dispersed particles by Maxwell in 1881 and recently generalized by Nan et al. [J. Appl. Phys. 81, 6692 (1997)], was found to be in good agreement with the experimental data, suggesting that no anomalous enhancement of thermal conductivity was achieved in the nanofluids tested in this exercise.

Heat transport properties of plates with smooth and rough surfaces in turbulent thermal convection

Abstract: We present an experimental study of turbulent thermal convection with smooth and rough surface plates in various combinations. A total of five cells were used in the experiments. Both the global Nu and the Nu for each plate (or the associated boundary layer) are measured. The results reveal that the smooth plates are insensitive to the surface (rough or smooth) and boundary conditions (i.e. nominally constant temperature or constant flux) of the other plate of the same cell. The heat transport properties of the rough plates, on the other hand, depend not only on the nature of the plate at the opposite side of the cell, but also on the boundary condition of that plate. It thus appears that, at the present level of experimental resolution, the smooth plate can influence the rough plate, but cannot be influenced by either the rough or the smooth plates. It is further found that the scaling of Nu with Ra for all of the smooth plates is consistent with the classical 1=3 exponent. But the scaling exponent for the global Nu for the cell with both plates being smooth is definitely less than 1=3 (this result itself is consistent with all previous studies at comparable parameter range). The discrepancy between the Nu behaviour at the whole-cell and individual-plate levels is not understood and deserves further investigation.

Viscosity measurements on colloidal dispersions (nanofluids) for heat transfer applications

Abstract: This article reports viscosity data on a series of colloidal dispersions collected as part of the International Nanofluid Property Benchmark Exercise (INPBE). Data are reported for seven different fluids that include dispersions of metal-oxide nanoparticles in water, and in synthetic oil. These fluids, which are also referred to as 'nanofluids,' are currently being researched for their potential to function as heat transfer fluids. In a recently published paper from the INPBE study, thermal conductivity data from more than 30 laboratories around the world were reported and analyzed. Here, we examine the influence of particle shape and concentration on the viscosity of these same nanofluids and compare data to predictions from classical theories on suspension rheology. © Appl. Rheol.

Small particles, big impacts: A review of the diverse applications of nanofluids

Abstract: Nanofluids—a simple product of the emerging world of nanotechnology—are suspensions of nanoparticles (nominally 1–100 nm in size) in conventional base fluids such as water, oils, or glycols. Nanofluids have seen enormous growth in popularity since they were proposed by Choi in 1995. In the year 2011 alone, there were nearly 700 research articles where the term nanofluid was used in the title, showing rapid growth from 2006 (175) and 2001 (10). The first decade of nanofluid research was primarily focused on measuring and modeling fundamental thermophysical properties of nanofluids (thermal conductivity, density, viscosity, heat transfer coefficient). Recent research, however, explores the performance of nanofluids in a wide variety of other applications. Analyzing the available body of research to date, this article presents recent trends and future possibilities for nanofluids research and suggests which applications will see the most significant improvement from employing nanofluids.

Experimental and theoretical studies of nanofluid thermal conductivity enhancement: a review

Abstract: Nanofluids, i.e., well-dispersed (metallic) nanoparticles at low- volume fractions in liquids, may enhance the mixture’s thermal conductivity, knf, over the base-fluid values. Thus, they are potentially useful for advanced cooling of micro-systems. Focusing mainly on dilute suspensions of well-dispersed spherical nanoparticles in water or ethylene glycol, recent experimental observations, associated measurement techniques, and new theories as well as useful correlations have been reviewed. It is evident that key questions still linger concerning the best nanoparticle-and-liquid pairing and conditioning, reliable measurements of achievable knf values, and easy-to-use, physically sound computer models which fully describe the particle dynamics and heat transfer of nanofluids. At present, experimental data and measurement methods are lacking consistency. In fact, debates on whether the anomalous enhancement is real or not endure, as well as discussions on what are repeatable correlations between knf and temperature, nanoparticle size/shape, and aggregation state. Clearly, benchmark experiments are needed, using the same nanofluids subject to different measurement methods. Such outcomes would validate new, minimally intrusive techniques and verify the reproducibility of experimental results. Dynamic knf models, assuming non-interacting metallic nano-spheres, postulate an enhancement above the classical Maxwell theory and thereby provide potentially additional physical insight. Clearly, it will be necessary to consider not only one possible mechanism but combine several mechanisms and compare predictive results to new benchmark experimental data sets.

A review on thermophysical properties of nanofluids and heat transfer applications

Abstract: This paper summarizes the important results regarding the improvement in the thermophysical properties of nanofluids. The influence of important parameters like particle's (loading, material, size, and shape), base fluid type, temperature, additives and pH value has been considered. There are many conflicting reports on the influence of parameters on thermophysical properties and the literature in this field is widespread, so this article would be beneficial for investigators to have a precise screening of a broad range of studies in this field. Further literature review of the applications of nanofluids with a particular focus on the advantages of using nanofluids in solar collectors and as coolants in automotive heat exchangers. The authors hope that this review can help in the translation of nanofluid technology from the lab scale research to industrial applications in solar collectors and automotive sector. At last, the paper identifies the opportunities for future research.

Investigation of thermal conductivity and rheological properties of nanofluids containing graphene nanoplatelets

Abstract: In the present study, stable homogeneous graphene nanoplatelet (GNP) nanofluids were prepared without any surfactant by high-power ultrasonic (probe) dispersion of GNPs in distilled water. The concentrations of nanofluids were maintained at 0.025, 0.05, 0.075, and 0.1 wt.% for three different specific surface areas of 300, 500, and 750 m2/g. Transmission electron microscopy image shows that the suspensions are homogeneous and most of the materials have been well dispersed. The stability of nanofluid was investigated using a UV-visible spectrophotometer in a time span of 600 h, and zeta potential after dispersion had been investigated to elucidate its role on dispersion characteristics. The rheological properties of GNP nanofluids approach Newtonian and non-Newtonian behaviors where viscosity decreases linearly with the rise of temperature. The thermal conductivity results show that the dispersed nanoparticles can always enhance the thermal conductivity of the base fluid, and the highest enhancement was obtained to be 27.64% in the concentration of 0.1 wt.% of GNPs with a specific surface area of 750 m2/g. Electrical conductivity of the GNP nanofluids shows a significant enhancement by dispersion of GNPs in distilled water. This novel type of nanofluids shows outstanding potential for replacements as advanced heat transfer fluids in medium temperature applications including solar collectors and heat exchanger systems.