Author
Xijiang Han
Bio: Xijiang Han is an academic researcher from Harbin Institute of Technology. The author has contributed to research in topics: Reflection loss & Polyaniline. The author has an hindex of 51, co-authored 135 publications receiving 9541 citations.
Topics: Reflection loss, Polyaniline, Nanoparticle, Catalysis, Materials science
Papers published on a yearly basis
Papers
More filters
TL;DR: By considering good chemical homogeneity and microwave absorption, it is believed the as-fabricated Fe3O4@C composites can be promising candidates as highly effective microwave absorbers.
Abstract: Core–shell composites, Fe3O4@C, with 500 nm Fe3O4 microspheres as cores have been successfully prepared through in situ polymerization of phenolic resin on the Fe3O4 surface and subsequent high-temperature carbonization. The thickness of carbon shell, from 20 to 70 nm, can be well controlled by modulating the weight ratio of resorcinol and Fe3O4 microspheres. Carbothermic reduction has not been triggered at present conditions, thus the crystalline phase and magnetic property of Fe3O4 micropsheres can be well preserved during the carbonization process. Although carbon shells display amorphous nature, Raman spectra reveal that the presence of Fe3O4 micropsheres can promote their graphitization degree to a certain extent. Coating Fe3O4 microspheres with carbon shells will not only increase the complex permittivity but also improve characteristic impedance, leading to multiple relaxation processes in these composites, thus the microwave absorption properties of these composites are greatly enhanced. Very inte...
817 citations
TL;DR: The residual defects and groups in chemically reduced graphene oxide cannot not only improve the impedance match characteristic and prompt energy transition from contiguous states to Fermi level, but also introduce defect polarization relaxation and groups' electronic dipole relaxation, which are all in favor of electromagnetic wave penetration and absorption as mentioned in this paper.
Abstract: The residual defects and groups in chemically reduced graphene oxide cannot only improve the impedance match characteristic and prompt energy transition from contiguous states to Fermi level, but also introduce defect polarization relaxation and groups’ electronic dipole relaxation, which are all in favor of electromagnetic wave penetration and absorption The chemically reduced graphene oxide shows enhanced microwave absorption compared with graphite and carbon nanotubes, and can be expected to display better absorption than high quality graphene, exhibiting a promising prospect as microwave absorbing material
728 citations
TL;DR: In this paper, a uniform core-shell Co@C microspheres are innovatively fabricated through an in situ transformation from Co 3 O 4 @phenolic resin precursor, which can restrain the agglomeration of Co particles during high-temperature treatment, which accounts for the survival of uniform coreshell microstructure.
604 citations
TL;DR: In this article, a cubic framework of amorphous carbon and uniformly dispersed core-shell Fe@graphitic carbon nanoparticles is used to construct a high-performance microwave absorber.
Abstract: Composites of magnetic metal nanoparticles and carbon materials are highly desirable for high-performance microwave absorbers due to their compatible dielectric loss and magnetic loss abilities. In this article, novel nanocomposites, Fe/C nanocubes, have been successfully prepared through an in situ route from a metal–organic framework, Prussian blue, by controlled high-temperature pyrolysis. The resultant nanocubes are actually composed of a cubic framework of amorphous carbon and uniformly dispersed core–shell Fe@graphitic carbon nanoparticles. Within the studied pyrolysis temperature range (600–700 °C), the porous structure, iron content, magnetic properties, and graphitization degree of the Fe/C nanocubes can be well modulated. Particularly, the improved carbon graphitization degree, both in amorphous frameworks and graphitic shells, results in enhanced complex permittivity and dielectric loss properties. The homogeneous chemical composition and microstructure stimulate the formation of multiple dielectric resonances by regularizing various polarizations. The synergistic effect of dielectric loss, magnetic loss, matched impedance, and dielectric resonances accounts for the improved microwave absorption properties of the Fe/C nanocubes. The absorption bands of the optimum one obtained at 650 °C are superior to most composites ever reported. By considering the good chemical homogeneity and microwave absorption, we believe that the as-fabricated Fe/C nanocubes will be promising candidates as highly effective microwave absorbers.
545 citations
TL;DR: Although PPy@PANI composites herein consume the incident electromagnetic wave by absolute dielectric loss, their performances are still superior or comparable to most PANI-based composites ever reported, indicating that they can be taken as a new kind of promising lightweight microwave absorbers.
Abstract: Highly uniform core–shell composites, polypyrrole@polyaniline (PPy@PANI), have been successfully constructed by directing the polymerization of aniline on the surface of PPy microspheres. The thickness of PANI shells, from 30 to 120 nm, can be well controlled by modulating the weight ratio of aniline and PPy microspheres. PPy microspheres with abundant carbonyl groups have very strong affinity to the conjugated chains of PANI, which is responsible for the spontaneous formation of uniform core–shell microstructures. However, the strong affinity between PPy microspheres and PANI shells does not promote the diffusion or reassembly of two kinds of conjugated chains. Coating PPy microspheres with PANI shells increases the complex permittivity and creates the mechanism of interfacial polarization, where the latter plays an important role in increasing the dielectric loss of PPy@PANI composites. With a proper thickness of PANI shells, the moderate dielectric loss will produce well matched characteristic impedanc...
419 citations
Cited by
More filters
TL;DR: It is anticipated that this review can stimulate a new research doorway to facilitate the next generation of g-C3N4-based photocatalysts with ameliorated performances by harnessing the outstanding structural, electronic, and optical properties for the development of a sustainable future without environmental detriment.
Abstract: As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...
5,054 citations
TL;DR: The mechanical flexibility and easy coating capability offered by MXenes and their composites enable them to shield surfaces of any shape while providing high EMI shielding efficiency.
Abstract: Materials with good flexibility and high conductivity that can provide electromagnetic interference (EMI) shielding with minimal thickness are highly desirable, especially if they can be easily processed into films. Two-dimensional metal carbides and nitrides, known as MXenes, combine metallic conductivity and hydrophilic surfaces. Here, we demonstrate the potential of several MXenes and their polymer composites for EMI shielding. A 45-micrometer-thick Ti3C2Tx film exhibited EMI shielding effectiveness of 92 decibels (>50 decibels for a 2.5-micrometer film), which is the highest among synthetic materials of comparable thickness produced to date. This performance originates from the excellent electrical conductivity of Ti3C2Tx films (4600 Siemens per centimeter) and multiple internal reflections from Ti3C2Tx flakes in free-standing films. The mechanical flexibility and easy coating capability offered by MXenes and their composites enable them to shield surfaces of any shape while providing high EMI shielding efficiency.
3,251 citations
TL;DR: The photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal coc atalysts, and Z-scheme heterojunctions.
Abstract: Semiconductor-based photocatalysis is considered to be an attractive way for solving the worldwide energy shortage and environmental pollution issues. Since the pioneering work in 2009 on graphitic carbon nitride (g-C3N4) for visible-light photocatalytic water splitting, g-C3N4 -based photocatalysis has become a very hot research topic. This review summarizes the recent progress regarding the design and preparation of g-C3N4 -based photocatalysts, including the fabrication and nanostructure design of pristine g-C3N4 , bandgap engineering through atomic-level doping and molecular-level modification, and the preparation of g-C3N4 -based semiconductor composites. Also, the photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal cocatalysts, and Z-scheme heterojunctions. Finally, the concluding remarks are presented and some perspectives regarding the future development of g-C3N4 -based photocatalysts are highlighted.
2,868 citations
01 Sep 1955
TL;DR: In this paper, the authors restrict their attention to the ferrites and a few other closely related materials, which are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present.
Abstract: In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.
2,659 citations