Xingqin Lin

Bio: Xingqin Lin is an academic researcher from Ericsson. The author has contributed to research in topics: Cellular network & Wireless. The author has an hindex of 31, co-authored 197 publications receiving 6924 citations. Previous affiliations of Xingqin Lin include University of Texas at Austin & Nokia Networks.

An overview of 3GPP device-to-device proximity services

Abstract: Device-to-device communication is likely to be added to LTE in 3GPP Release 12. In principle, exploiting direct communication between nearby mobile devices will improve spectrum utilization, overall throughput, and energy consumption, while enabling new peer-to-peer and location-based applications and services. D2D-enabled LTE devices can also become competitive for fallback public safety networks, which must function when cellular networks are not available or fail. Introducing D2D poses many challenges and risks to the long-standing cellular architecture, which is centered around the base station. We provide an overview of D2D standardization activities in 3GPP, identify outstanding technical challenges, draw lessons from initial evaluation studies, and summarize "best practices" in the design of a D2D-enabled air interface for LTE-based cellular networks

A Primer on 3GPP Narrowband Internet of Things (NB-IoT)

Abstract: Narrowband Internet of Things (NB-IoT) is a new cellular technology introduced in 3GPP Release 13 for providing wide-area coverage for the Internet of Things (IoT). This article provides an overview of the air interface of NB-IoT. We describe how NB-IoT addresses key IoT requirements such as deployment flexibility, low device complexity, long battery life time, support of massive number of devices in a cell, and significant coverage extension beyond existing cellular technologies. We also share the various design rationales during the standardization of NB-IoT in Release 13 and point out several open areas for future evolution of NB-IoT.

The Sky Is Not the Limit: LTE for Unmanned Aerial Vehicles

Abstract: Many use cases of UAVs require beyond visual LOS communications. Mobile networks offer wide-area, high-speed, and secure wireless connectivity, which can enhance control and safety of UAV operations and enable beyond visual LOS use cases. In this article, we share some of our experience in LTE connectivity for low-altitude small UAVs. We first identify the typical airborne connectivity requirements and characteristics, highlight the different propagation conditions for UAVs and mobiles on the ground with measurement and ray tracing results, and present simulation results to shed light on the feasibility of providing LTE connectivity for UAVs. We also present several ideas on potential enhancements for improving LTE connectivity performance and identify fruitful avenues for future research.

A Primer on 3GPP Narrowband Internet of Things

Abstract: Narrowband Internet of Things (NB-IoT) is a new cellular technology introduced in 3GPP Release 13 for providing wide-area coverage for IoT. This article provides an overview of the air interface of NB-IoT. We describe how NB-IoT addresses key IoT requirements such as deployment flexibility, low device complexity, long battery lifetime, support of massive numbers of devices in a cell, and significant coverage extension beyond existing cellular technologies. We also share the various design rationales during the standardization of NB-IoT in Release 13 and point out several open areas for future evolution of NB-IoT.

An overview of load balancing in hetnets: old myths and open problems

Abstract: Matching the demand for resources (?load?) with the supply of resources (?capacity?) is a basic problem occurring across many fields of engineering, logistics, and economics, and has been considered extensively in both the Internet and wireless networks. The ongoing evolution of cellular communication networks into dense, organic, and irregular heterogeneous networks (HetNets) has elevated load awareness to a central problem, and introduces many new subtleties. This article explains how several long-standing assumptions about cellular networks need to be rethought in the context of a load-balanced HetNet: we highlight these as three deeply entrenched myths that we then dispel. We survey and compare the primary technical approaches to HetNet load balancing: (centralized) optimization, game theory, Markov decision processes, and the newly popular cell range expansion (a.k.a. biasing), and draw design lessons for OFDMA-based cellular systems. We also identify several open areas for future exploration.

What Will 5G Be

Abstract: What will 5G be? What it will not be is an incremental advance on 4G. The previous four generations of cellular technology have each been a major paradigm shift that has broken backward compatibility. Indeed, 5G will need to be a paradigm shift that includes very high carrier frequencies with massive bandwidths, extreme base station and device densities, and unprecedented numbers of antennas. However, unlike the previous four generations, it will also be highly integrative: tying any new 5G air interface and spectrum together with LTE and WiFi to provide universal high-rate coverage and a seamless user experience. To support this, the core network will also have to reach unprecedented levels of flexibility and intelligence, spectrum regulation will need to be rethought and improved, and energy and cost efficiencies will become even more critical considerations. This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.

A Survey on Device-to-Device Communication in Cellular Networks

Abstract: Device-to-device (D2D) communications was initially proposed in cellular networks as a new paradigm for enhancing network performance. The emergence of new applications such as content distribution and location-aware advertisement introduced new user cases for D2D communications in cellular networks. The initial studies showed that D2D communications has advantages such as increased spectral efficiency and reduced communication delay. However, this communication mode introduces complications in terms of interference control overhead and protocols that are still open research problems. The feasibility of D2D communications in Long-Term Evolution Advanced is being studied by academia, industry, and standardization bodies. To date, there are more than 100 papers available on D2D communications in cellular networks, but there is no survey on this field. In this paper, we provide a taxonomy based on the D2D communicating spectrum and review the available literature extensively under the proposed taxonomy. Moreover, we provide new insights into the over-explored and under-explored areas that lead us to identify open research problems of D2D communications in cellular networks.

A Survey on Device-to-Device Communication in Cellular Networks

Abstract: Device-to-Device (D2D) communication was initially proposed in cellular networks as a new paradigm to enhance network performance. The emergence of new applications such as content distribution and location-aware advertisement introduced new use-cases for D2D communications in cellular networks. The initial studies showed that D2D communication has advantages such as increased spectral efficiency and reduced communication delay. However, this communication mode introduces complications in terms of interference control overhead and protocols that are still open research problems. The feasibility of D2D communications in LTE-A is being studied by academia, industry, and the standardization bodies. To date, there are more than 100 papers available on D2D communications in cellular networks and, there is no survey on this field. In this article, we provide a taxonomy based on the D2D communicating spectrum and review the available literature extensively under the proposed taxonomy. Moreover, we provide new insights to the over-explored and under-explored areas which lead us to identify open research problems of D2D communication in cellular networks.

A Survey of Indoor Localization Systems and Technologies

Abstract: Indoor localization has recently witnessed an increase in interest, due to the potential wide range of services it can provide by leveraging Internet of Things (IoT), and ubiquitous connectivity. Different techniques, wireless technologies and mechanisms have been proposed in the literature to provide indoor localization services in order to improve the services provided to the users. However, there is a lack of an up-to-date survey paper that incorporates some of the recently proposed accurate and reliable localization systems. In this paper, we aim to provide a detailed survey of different indoor localization techniques, such as angle of arrival (AoA), time of flight (ToF), return time of flight (RTOF), and received signal strength (RSS); based on technologies, such as WiFi, radio frequency identification device (RFID), ultra wideband (UWB), Bluetooth, and systems that have been proposed in the literature. This paper primarily discusses localization and positioning of human users and their devices. We highlight the strengths of the existing systems proposed in the literature. In contrast with the existing surveys, we also evaluate different systems from the perspective of energy efficiency, availability, cost, reception range, latency, scalability, and tracking accuracy. Rather than comparing the technologies or techniques, we compare the localization systems and summarize their working principle. We also discuss remaining challenges to accurate indoor localization.

A Tutorial on UAVs for Wireless Networks: Applications, Challenges, and Open Problems

Abstract: The use of flying platforms such as unmanned aerial vehicles (UAVs), popularly known as drones, is rapidly growing. In particular, with their inherent attributes such as mobility, flexibility, and adaptive altitude, UAVs admit several key potential applications in wireless systems. On the one hand, UAVs can be used as aerial base stations to enhance coverage, capacity, reliability, and energy efficiency of wireless networks. On the other hand, UAVs can operate as flying mobile terminals within a cellular network. Such cellular-connected UAVs can enable several applications ranging from real-time video streaming to item delivery. In this paper, a comprehensive tutorial on the potential benefits and applications of UAVs in wireless communications is presented. Moreover, the important challenges and the fundamental tradeoffs in UAV-enabled wireless networks are thoroughly investigated. In particular, the key UAV challenges such as 3D deployment, performance analysis, channel modeling, and energy efficiency are explored along with representative results. Then, open problems and potential research directions pertaining to UAV communications are introduced. Finally, various analytical frameworks and mathematical tools, such as optimization theory, machine learning, stochastic geometry, transport theory, and game theory are described. The use of such tools for addressing unique UAV problems is also presented. In a nutshell, this tutorial provides key guidelines on how to analyze, optimize, and design UAV-based wireless communication systems.