Xinli Liu

Bio: Xinli Liu is an academic researcher from Chinese Academy of Sciences. The author has contributed to research in topics: Polymerization & Ring-opening polymerization. The author has an hindex of 18, co-authored 34 publications receiving 1185 citations.

Facile Synthesis of Hydroxyl-Ended, Highly Stereoregular, Star-Shaped Poly(lactide) from Immortal ROP of rac-Lactide and Kinetics Study

Abstract: Triethanolamine (TEA) reacted with 3 equiv of yttrium alkyl complex 1 bearing O,N,N,O-tetradentate Salan ligand to give a trinuclear yttrium alkoxide counterpart 2 via metathesis reaction Complex 2 initiated the ring-opening polymerization of rac-lactide in a livingness mode under mild conditions Remarkably, 2 was so tolerant of the protic TEA that under various TEA-to-yttrium molar ratios ranging from 1:3 up to 81:1, the polymerization performed smoothly, suggesting an immortal characteristic The resultant polylactides had variable molecular weights (Mn = 136 × 104to 3254 × 104) but narrow molecular weight distributions (PDI = 102−109), and, especially, pure heterotactic (Pr = 099), hydroxyl-functionalized and star-shaped architecture, which were fully characterized by NMR spectroscopy and MALDI−TOF mass spectrum analyses and confirmed further by calculating the contraction factor value g′ (g′ = 096) via Mark−Houwink equations Detailed investigation of the “immortal” polymerization gave a uniqu

Yttrium bis(alkyl) and bis(amido) complexes bearing N,O multidentate ligands. Synthesis and catalytic activity towards ring-opening polymerization of L-lactide

Abstract: Methoxy-modified beta-diimines HL1 and HL2 reacted with Y(CH2SiMe3)(3)(THF)(2) to afford the corresponding bis(alkyl)s [(LY)-Y-1(CH2SiMe3)(2)] (1) and [(LY)-Y-2(CH2SiMe3)(2)] (2), respectively. Amination of 1 with 2,6-diisopropyl aniline gave the bis(amido) counterpart [(LY)-Y-1{N(H)(2,6-iPr(2)-C6H3)}(2)] (3), selectively. Treatment of Y(CH2SiMe3)(3)(THF)(2) with methoxy-modified anilido imine HL3 yielded bis(alkyl) complex [(LY)-Y-3(CH2SiMe3)(2)(THF)] (4) that sequentially reacted with 2,6-diisopropyl aniline to give the bis(amido) analogue [(LY)-Y-3{N(H)(2,6-iPr(2)-C6H3)}(2)] (5). Complex 2 was "base-free" monomer, in which the tetradentate beta-diiminato ligand was meridional with the two alkyl species locating above and below it, generating tetragonal bipyramidal core about the metal center. Complex 3 was asymmetric monomer containing trigonal bipyramidal core with trans-arrangement of the amido ligands. In contrast, the two cis-located alkyl species in complex 4 were endo and exo towards the 0,N,N tridentate anilido-imido moiety. The bis(amido) complex 5 was confirmed to be structural analogue to 4 albeit without THF coordination. All these yttrium complexes are highly active initiators for the ring-opening polymerization Of L-LA at room temperature.

Ligand-Free Magnesium Catalyst System: Immortal Polymerization of l-Lactide with High Catalyst Efficiency and Structure of Active Intermediates

Abstract: A simple, inexpensive, and convenient catalyst system consisting of supporting ligand-free MgnBu2 in combination with an alcohol, isopropanol (iPrOH), benzyl methanol (PhCH2OH), diphenylmethanol (Ph2CHOH), or triphenylmethanol (Ph3COH), generates a convenient catalyst system to promote the polymerization of l-LA. In particular, the binary system MgnBu2/Ph2CHOH demonstrates an unprecedentedly high activity in the presence of a large excess amount of Ph2CHOH with the [OH]0/[Mg]0 ratio varying from 2 to 500, producing up to 500 polylactide (PLA) chains per Mg center and thus showing a typical nature of immortal polymerization. The molecular weights of the obtained PLAs with a broad range of monomer-to-metal ratios ([l-LA]0/[Mg]0 = 200–5000) are rather accurately controlled by the Ph2CHOH loading, relative to [Mg]0, while the molecular weight distributions remain nearly constant with polydispersity index (PDI) = 1.08–1.18. Moreover, the active polymerization intermediate has been isolated from the stoichiomet...

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China

An overview of CO2 capture technologies

Abstract: In this paper, three of the leading options for large scale CO2 capture are reviewed from a technical perspective. We consider solvent-based chemisorption techniques, carbonate looping technology, and the so-called oxyfuel process. For each technology option, we give an overview of the technology, listing advantages and disadvantages. Subsequently, a discussion of the level of technological maturity is presented, and we conclude by identifying current gaps in knowledge and suggest areas with significant scope for future work. We then discuss the suitability of using ionic liquids as novel, environmentally benign solvents with which to capture CO2. In addition, we consider alternatives to simply sequestering CO2—we present a discussion on the possibility of recycling captured CO2 and exploiting it as a C1 building block for the sustainable manufacture of polymers, fine chemicals, and liquid fuels. Finally, we present a discussion of relevant systems engineering methodologies in carbon capture system design.

Stereocontrolled ring-opening polymerization of cyclic esters: synthesis of new polyester microstructures.

Abstract: Synthesis of aliphatic polyesters has been studied intensively due to their biocompatible and biodegradable properties and their potential applications in medical and agricultural fields. There has been particular emphasis over the past decade on the synthesis of discrete, well-characterized complexes that are active polymerization initiators for the ring-opening polymerization (ROP) of lactide (LA) and β-butyrolactone (BBL) to give, respectively, poly(lactide) (PLA) and poly(3-hydroxybutyrate) (PHB). These recent advances in catalyst design have led to a variety of polyester microstructures. This tutorial review focuses on the use of metal-based complexes for the stereoselective ROP of rac-LA and rac-BBL.

Stereocontrolled ring-opening polymerisation of lactide

Abstract: The important advances and current trends in the stereocontrolled ring-opening polymerisation of lactide are discussed in this tutorial review. Microstructures, structural characterisation methods and the properties of stereoregular poly(lactide)s are examined. The application of metal-based catalysts dominates this area although simple anionic polymerisation and organocatalytic routes that demonstrate control of the polymer tacticity are discussed.