Xinming Li

Bio: Xinming Li is an academic researcher from South China Normal University. The author has contributed to research in topics: Graphene & Schottky barrier. The author has an hindex of 55, co-authored 120 publications receiving 9299 citations. Previous affiliations of Xinming Li include The Chinese University of Hong Kong & Center for Excellence in Education.

Graphene‐On‐Silicon Schottky Junction Solar Cells

Abstract: www.MaterialsViews.com C O M Graphene-On-Silicon Schottky Junction Solar Cells M U N I By Xinming Li , Hongwei Zhu , * Kunlin Wang , * Anyuan Cao , Jinquan Wei , Chunyan Li , Yi Jia , Zhen Li , Xiao Li , and Dehai Wu C A IO N Graphene, a single atomic layer of carbon hexagons, has stimulated a lot of research interest owing to its unique structure and fascinating properties. [ 1 ] Graphene has been produced in the form of ultrathin sheets consisting of one or a few atomic layers by chemical vapor deposition (CVD) [ 2–4 ] or solution processing [ 5 , 6 ] and can be transferred to various substrates. The two-dimensionality and structural fl atness make graphene sheets ideal candidates for thin-fi lm devices and combination with other semiconductor materials such as silicon. These fi lms typically show sheet resistances on the order of several hundred ohm per square at about 80% optical transparency. [ 7 ] With modifi cation on the electronic properties and improvement of processing techniques, graphene fi lms show potential for use in conductive, fl exible electrodes, as an alternative for indium tin oxide (ITO). Graphene applications are just starting, and current investigations are on a number of areas such as fi llers for composites, nanoelectronics, and transparent electrodes. [ 8 ] For applications related to solar cells, graphene microsheets were dispersed into conjugated polymers to improve exciton dissociation and charge transport. [ 9–11 ] Also, solution-processed thin fi lms were used as conductive and transparent electrodes for organic [ 12 ] and dyesensitized [ 13 ] solar cells, although the cell effi ciency is still lower than those with ITO and fl uorine tin oxide (FTO) electrodes. Compared with carbon nanotube fi lms that have been extensively studied, graphene fi lms may have several advantages. A continuous single-layer graphene fi lm could retain high conductivity at very low (atomic) thickness, and avoid contact resistance that occurs in a carbon nanotube fi lm between interconnected nanotube bundles. In addition, graphene fi lms have minimum porosity and, in small areas, can provide an extremely fl at surface for molecule assembly and device integration. There are many opportunities in utilizing distinct properties of graphene and exploring novel applications. Bulk heterojunction structures based on carbon materials have attracted a great deal of interest for both scientifi c fundamentals and potential applications in various new optoelectronic devices,

Graphene and related two-dimensional materials: Structure-property relationships for electronics and optoelectronics

Abstract: The exfoliation and identification of the two-dimensional (2D) single atomic layer of carbon have opened the opportunity to explore graphene and related 2D materials due to their unique properties. 2D materials are regarded as one of the most exciting solutions for next generation electronics and optoelectronics in the technological evolution of semiconductor technology. In this review, we focus on the core concept of “structure-property relationships” to explain the state-of-the-art of 2D materials and summarize the unique electrical and light-matter interaction properties in 2D materials. Based on this, we discuss and analyze the structural properties of 2D materials, such as defects and dopants, the number of layers, composition, phase, strain, and other structural characteristics, which could significantly alter the properties of 2D materials and hence affect the performance of semiconductor devices. In particular, the building blocks principles and potential electronic and optoelectronic applications...

Large-area graphene-nanomesh/carbon-nanotube hybrid membranes for ionic and molecular nanofiltration.

Abstract: Nanoporous two-dimensional materials are attractive for ionic and molecular nanofiltration but limited by insufficient mechanical strength over large areas. We report a large-area graphene-nanomesh/single-walled carbon nanotube (GNM/SWNT) hybrid membrane with excellent mechanical strength while fully capturing the merit of atomically thin membranes. The monolayer GNM features high-density, subnanometer pores for efficient transport of water molecules while blocking solute ions or molecules to enable size-selective separation. The SWNT network physically separates the GNM into microsized islands and acts as the microscopic framework to support the GNM, thus ensuring the structural integrity of the atomically thin GNM. The resulting GNM/SWNT membranes show high water permeance and a high rejection ratio for salt ions or organic molecules, and they retain stable separation performance in tubular modules.

Flexible Piezoelectric-Induced Pressure Sensors for Static Measurements Based on Nanowires/Graphene Heterostructures

Abstract: The piezoelectric effect is widely applied in pressure sensors for the detection of dynamic signals. However, these piezoelectric-induced pressure sensors have challenges in measuring static signals that are based on the transient flow of electrons in an external load as driven by the piezopotential arisen from dynamic stress. Here, we present a pressure sensor with nanowires/graphene heterostructures for static measurements based on the synergistic mechanisms between strain-induced polarization charges in piezoelectric nanowires and the caused change of carrier scattering in graphene. Compared to the conventional piezoelectric nanowire or graphene pressure sensors, this sensor is capable of measuring static pressures with a sensitivity of up to 9.4 × 10–3 kPa–1 and a fast response time down to 5–7 ms. This demonstration of pressure sensors shows great potential in the applications of electronic skin and wearable devices.

High Detectivity Graphene-Silicon Heterojunction Photodetector

Abstract: A graphene/n-type silicon (n-Si) heterojunction has been demonstrated to exhibit strong rectifying behavior and high photoresponsivity, which can be utilized for the development of high-performance photodetectors. However, graphene/n-Si heterojunction photodetectors reported previously suffer from relatively low specific detectivity due to large dark current. Here, by introducing a thin interfacial oxide layer, the dark current of graphene/n-Si heterojunction has been reduced by two orders of magnitude at zero bias. At room temperature, the graphene/n-Si photodetector with interfacial oxide exhibits a specific detectivity up to 5.77 × 10(13) cm Hz(1/2) W(-1) at the peak wavelength of 890 nm in vacuum, which is highest reported detectivity at room temperature for planar graphene/Si heterojunction photodetectors. In addition, the improved graphene/n-Si heterojunction photodetectors possess high responsivity of 0.73 A W(-1) and high photo-to-dark current ratio of ≈10(7) . The current noise spectral density of the graphene/n-Si photodetector has been characterized under ambient and vacuum conditions, which shows that the dark current can be further suppressed in vacuum. These results demonstrate that graphene/Si heterojunction with interfacial oxide is promising for the development of high detectivity photodetectors.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

Graphene-based composites

Abstract: Graphene has attracted tremendous research interest in recent years, owing to its exceptional properties. The scaled-up and reliable production of graphene derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), offers a wide range of possibilities to synthesize graphene-based functional materials for various applications. This critical review presents and discusses the current development of graphene-based composites. After introduction of the synthesis methods for graphene and its derivatives as well as their properties, we focus on the description of various methods to synthesize graphene-based composites, especially those with functional polymers and inorganic nanostructures. Particular emphasis is placed on strategies for the optimization of composite properties. Lastly, the advantages of graphene-based composites in applications such as the Li-ion batteries, supercapacitors, fuel cells, photovoltaic devices, photocatalysis, as well as Raman enhancement are described (279 references).

Photodetectors based on graphene, other two-dimensional materials and hybrid systems

Abstract: Graphene and other two-dimensional materials, such as transition metal dichalcogenides, have rapidly established themselves as intriguing building blocks for optoelectronic applications, with a strong focus on various photodetection platforms The versatility of these material systems enables their application in areas including ultrafast and ultrasensitive detection of light in the ultraviolet, visible, infrared and terahertz frequency ranges These detectors can be integrated with other photonic components based on the same material, as well as with silicon photonic and electronic technologies Here, we provide an overview and evaluation of state-of-the-art photodetectors based on graphene, other two-dimensional materials, and hybrid systems based on the combination of different two-dimensional crystals or of two-dimensional crystals and other (nano)materials, such as plasmonic nanoparticles, semiconductors, quantum dots, or their integration with (silicon) waveguides

Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage

Abstract: Graphene and related two-dimensional crystals and hybrid systems showcase several key properties that can address emerging energy needs, in particular for the ever growing market of portable and wearable energy conversion and storage devices. Graphene's flexibility, large surface area, and chemical stability, combined with its excellent electrical and thermal conductivity, make it promising as a catalyst in fuel and dye-sensitized solar cells. Chemically functionalized graphene can also improve storage and diffusion of ionic species and electric charge in batteries and supercapacitors. Two-dimensional crystals provide optoelectronic and photocatalytic properties complementing those of graphene, enabling the realization of ultrathin-film photovoltaic devices or systems for hydrogen production. Here, we review the use of graphene and related materials for energy conversion and storage, outlining the roadmap for future applications.