Xungai Wang

Bio: Xungai Wang is an academic researcher from Deakin University. The author has contributed to research in topics: Electrospinning & Fiber. The author has an hindex of 68, co-authored 675 publications receiving 19654 citations. Previous affiliations of Xungai Wang include Nanyang Technological University & Commonwealth Scientific and Industrial Research Organisation.

Scalable Manufacturing of Free‐Standing, Strong Ti 3 C 2 T x MXene Films with Outstanding Conductivity

Abstract: Free-standing films that display high strength and high electrical conductivity are critical for flexible electronics, such as electromagnetic interference (EMI) shielding coatings and current collectors for batteries and supercapacitors. 2D Ti3 C2 Tx flakes are ideal candidates for making conductive films due to their high strength and metallic conductivity. It is, however, challenging to transfer those outstanding properties of single MXene flakes to macroscale films as a result of the small flake size and relatively poor flake alignment that occurs during solution-based processing. Here, a scalable method is shown for the fabrication of strong and highly conducting pure MXene films containing highly aligned large MXene flakes. These films demonstrate record tensile strength up to ≈570 MPa for a 940 nm thick film and electrical conductivity of ≈15 100 S cm-1 for a 214 nm thick film, which are both the highest values compared to previously reported pure Ti3 C2 Tx films. These films also exhibit outstanding EMI shielding performance (≈50 dB for a 940 nm thick film) that exceeds other synthetic materials with comparable thickness. MXene films with aligned flakes provide an effective route for producing large-area, high-strength, and high-electrical-conductivity MXene-based films for future electronic applications.

Fluoroalkyl silane modified silicone rubber/nanoparticle composite: a super durable, robust superhydrophobic fabric coating.

Abstract: A superhydrophobic fabric coating made of a crosslinked polydimethylsiloxane elastomer, containing well-dispersed hydrophobic silica nanoparticles and fluorinated alkyl silane, shows remarkable durability against repeated machine washes, severe abrasion, strong acid or base, boiling water or beverages and excellent stain resistance.

Durable, Self-Healing Superhydrophobic and Superoleophobic Surfaces from Fluorinated-Decyl Polyhedral Oligomeric Silsesquioxane and Hydrolyzed Fluorinated Alkyl Silane

Abstract: Super-liquid-repellent surfaces have attracted much attention in both scientific and industrial areas. They are often deemed superhydrophobic or superoleophobic depending on the liquid to be repelled. Superhydrophobic surfaces have a water contact angle greater than 1508. They have interesting nonsticking, self-cleaning, and anti-contamination functions. The emerging applications include separation of oil from water, energy conversion, protection of electronic devices, adjusting cell/substrate adhesion in the biomedical area, and reducing fluid resistance for aquaculture and microfluidic devices. In contrast, superoleophobic surfaces can be rather complicated, but they have great potential applications in antifouling from hazard chemicals and biological contaminants. Although any solid surface can be characterized as superoleophobic as long as its contact angle with an oily fluid is greater than 1508, the surface properties revealed from the contact angle measurement using different contacting oils could be considerably different. For example, a surface that is superoleophobic to certain oily fluids may have lower repellency or even be wettable by other oily fluids of a lower surface tension. It is normally easy to make a surface super-repellent to oils of a high surface tension, but difficult to prepare superoleophobic surfaces against oily fluids that have a surface tension below 35 mNm . Most super-liquid-repellent surfaces have poor durability. Chemical oxidation from exposure to air, a special chemical environment, strong light, or physical rubbing could cause the surfaces to lose their super-repellency permanently. It is imperative to improve the durability for practical applications. Recently, great progress has been made to develop mechanically robust superhydrophobic surfaces and laundering-durable superhydrophobic fabrics. On the other hand, the bioinspired self-healing ability has been proposed to be a promising solution to improve the durability of synthetic superhydrophobic surfaces. Recently, Li et al. reported a self-healing superhydrophobic coating that was prepared by chemical vapor deposition (CVD) of a fluoroalkyl silane on a layer-by-layer assembled porous surface, and self-healing was derived from the reacted fluoroalkyl silane embedded in the rigidly flexible coating layer. Wang et al. also reported the formation of a self-healing superamphiphobic surface on anodized alumina by filling the intrinsic pores with a lowsurface energy liquid. In the recent study, we have also found that fabrics coated with a hydrolysis product from fluorinated-decyl polyhedral oligomeric silsesquioxane (FD–POSS) and a fluorinated alkyl silane (FAS) have a self-healing superhydrophobic and superoleophobic surface and the coating shows excellent durability to acid, UV light, machine wash, and abrasion. Herein, we first report on its novel multiple self-healing ability and durable performance. The chemical structures of FD-POSS and FAS are shown in Figure 1 a. The coating solution was prepared by dissolving FD-POSS in five times its weight of FAS, and the resulting viscous solution was then dispersed in ethanol. After ultrasonication for 30 min, a homogeneous dispersion was obtained. Figure 1b shows the appearance of an FD–POSS/ FAS dispersion in ethanol. Such a suspension was stable at

The charge effect of cationic surfactants on the elimination of fibre beads in the electrospinning of polystyrene

Abstract: Polystyrene nanofibres were electrospun with the inclusion of cationic surfactants, dodecyltrimethylammonium bromide (DTAB) or tetrabutylammonium chloride (TBAC), in the polymer solution. A small amount of cationic surfactant effectively stopped the formation of beaded fibres during the electrospinning. The cationic surfactants were also found to improve the solution conductivity, but had no effect on the viscosity. Only DTAB had an effect on the surface tension of the polymer solution, the surface tension decreasing slightly with an increase in the concentration of DTAB. The formation of beaded fibres was attributed to an insufficient stretch of the filaments during the whipping of the jet, due to a low charge density. Adding the cationic surfactants improved the net charge density that enhanced the whipping instability. The jet was stretched under stronger charge repulsion and at a higher speed, resulting in an exhaustion of the bead structure. In addition, a polymer/surfactant interaction was found in the polystyrene–DTAB solution system, while this interaction was not found in the polystyrene–TBAC system. The polymer/surfactant interaction led to the formation of thinner fibres than those formed in the absence of the interaction. The effects of a non-ionic surfactant, Triton X-405, on the electrospun fibres were also studied. The addition of Triton X-405 did not eliminate the fibre beads, but reduced the bead numbers and changed the morphology. Triton X-405 slightly improved the solution conductivity, and had a minor effect on the surface tension, but no effect on the viscosity.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers

Abstract: Electrospinning is a highly versatile method to process solutions or melts, mainly of polymers, into continuous fibers with diameters ranging from a few micrometers to a few nanometers. This technique is applicable to virtually every soluble or fusible polymer. The polymers can be chemically modified and can also be tailored with additives ranging from simple carbon-black particles to complex species such as enzymes, viruses, and bacteria. Electrospinning appears to be straightforward, but is a rather intricate process that depends on a multitude of molecular, process, and technical parameters. The method provides access to entirely new materials, which may have complex chemical structures. Electrospinning is not only a focus of intense academic investigation; the technique is already being applied in many technological areas.

Functionalization of Graphene: Covalent and Non-Covalent Approaches, Derivatives and Applications

Abstract: Approaches, Derivatives and Applications Vasilios Georgakilas,† Michal Otyepka,‡ Athanasios B. Bourlinos,‡ Vimlesh Chandra, Namdong Kim, K. Christian Kemp, Pavel Hobza,‡,§,⊥ Radek Zboril,*,‡ and Kwang S. Kim* †Institute of Materials Science, NCSR “Demokritos”, Ag. Paraskevi Attikis, 15310 Athens, Greece ‡Regional Centre of Advanced Technologies and Materials, Department of Physical Chemistry, Faculty of Science, Palacky University Olomouc, 17. listopadu 12, 771 46 Olomouc, Czech Republic Center for Superfunctional Materials, Department of Chemistry, Pohang University of Science and Technology, San 31, Hyojadong, Namgu, Pohang 790-784, Korea Institute of Organic Chemistry and Biochemistry, Academy of Sciences of the Czech Republic, v.v.i., Flemingovo naḿ. 2, 166 10 Prague 6, Czech Republic

Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets.

Abstract: Layered double hydroxides (LDHs) are a class of ionic lamellar compounds made up of positively charged brucite-like layers with an interlayer region containing charge compensating anions and solvation molecules. Delamination of LDHs is an interesting route for producing positively charged thin platelets with a thickness of a few atomic layers, which can be used as nanocomposites for polymers or as building units for making new designed organic-inorganic or inorganic-inorganic nanomaterials. The synthesis of nanosized LDH platelets can be generally classified into two approaches, bottom-up and top-down. It requires modification of the LDH interlamellar environment and then selection of an appropriate solvent system. In DDS intercalated LDHs, the aliphatic tails of the DDS- anions exhibit a high degree of interdigitation in order to maximize guest-guest dispersive interactions. Bellezza reported that the LDH colloids can also been obtained by employing a reverse microemulsion approach.

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Abstract: Electrospinning is a versatile and viable technique for generating ultrathin fibers. Remarkable progress has been made with regard to the development of electrospinning methods and engineering of electrospun nanofibers to suit or enable various applications. We aim to provide a comprehensive overview of electrospinning, including the principle, methods, materials, and applications. We begin with a brief introduction to the early history of electrospinning, followed by discussion of its principle and typical apparatus. We then discuss its renaissance over the past two decades as a powerful technology for the production of nanofibers with diversified compositions, structures, and properties. Afterward, we discuss the applications of electrospun nanofibers, including their use as "smart" mats, filtration membranes, catalytic supports, energy harvesting/conversion/storage components, and photonic and electronic devices, as well as biomedical scaffolds. We highlight the most relevant and recent advances related to the applications of electrospun nanofibers by focusing on the most representative examples. We also offer perspectives on the challenges, opportunities, and new directions for future development. At the end, we discuss approaches to the scale-up production of electrospun nanofibers and briefly discuss various types of commercial products based on electrospun nanofibers that have found widespread use in our everyday life.