Yahya Rahmat-Samii

Bio: Yahya Rahmat-Samii is an academic researcher from University of California, Los Angeles. The author has contributed to research in topics: Antenna (radio) & Reflector (antenna). The author has an hindex of 77, co-authored 711 publications receiving 26747 citations. Previous affiliations of Yahya Rahmat-Samii include University of California & California Institute of Technology.

Particle swarm optimization in electromagnetics

Abstract: The particle swarm optimization (PSO), new to the electromagnetics community, is a robust stochastic evolutionary computation technique based on the movement and intelligence of swarms. This paper introduces a conceptual overview and detailed explanation of the PSO algorithm, as well as how it can be used for electromagnetic optimizations. This paper also presents several results illustrating the swarm behavior in a PSO algorithm developed by the authors at UCLA specifically for engineering optimizations (UCLA-PSO). Also discussed is recent progress in the development of the PSO and the special considerations needed for engineering implementation including suggestions for the selection of parameter values. Additionally, a study of boundary conditions is presented indicating the invisible wall technique outperforms absorbing and reflecting wall techniques. These concepts are then integrated into a representative example of optimization of a profiled corrugated horn antenna.

Microstrip antennas integrated with electromagnetic band-gap (EBG) structures: a low mutual coupling design for array applications

Abstract: Utilization of electromagnetic band-gap (EBG) structures is becoming attractive in the electromagnetic and antenna community. In this paper, a mushroom-like EBG structure is analyzed using the finite-difference time-domain (FDTD) method. Its band-gap feature of surface-wave suppression is demonstrated by exhibiting the near field distributions of the electromagnetic waves. The mutual coupling of microstrip antennas is parametrically investigated, including both the E and H coupling directions, different substrate thickness, and various dielectric constants. It is observed that the E-plane coupled microstrip antenna array on a thick and high permittivity substrate has a strong mutual coupling due to the pronounced surface waves. Therefore, an EBG structure is inserted between array elements to reduce the mutual coupling. This idea has been verified by both the FDTD simulations and experimental results. As a result, a significant 8 dB mutual coupling reduction is noticed from the measurements.

Wide-band E-shaped patch antennas for wireless communications

Abstract: This paper presents a novel single-patch wide-band microstrip antenna: the E-shaped patch antenna. Two parallel slots are incorporated into the patch of a microstrip antenna to expand it bandwidth. The wide-band mechanism is explored by investigating the behavior of the currents on the patch. The slot length, width, and position are optimized to achieve a wide bandwidth. The validity of the design concept is demonstrated by two examples with 21.2% and 32.3% bandwidths. Finally, a 30.3% E-shaped patch antenna, resonating at wireless communication frequencies of 1.9 and 2.4 GHz, is designed, fabricated and measured. The radiation pattern and directivity are also presented.

Electromagnetic Optimization by Genetic Algorithms

Abstract: From the Publisher: Authoritative coverage of a revolutionary technique for overcoming problems in electromagnetic design Genetic algorithms are stochastic search procedures modeled on the Darwinian concepts of natural selection and evolution. The machinery of genetic algorithms utilizes an optimization methodology that allows a global search of the cost surface via statistical random processes dictated by the Darwinian evolutionary concept. These easily programmed and readily implemented procedures robustly locate extrema of highly multimodal functions and therefore are particularly well suited to finding solutions to a broad range of electromagnetic optimization problems. Electromagnetic Optimization by Genetic Algorithms is the first book devoted exclusively to the application of genetic algorithms to electromagnetic device design. Compiled by two highly competent and well-respected members of the electromagnetics community, this book describes numerous applications of genetic algorithms to the design and optimization of various low- and high-frequency electromagnetic components. Special features include: *Introduction by David E. Goldberg, "A Meditation on the Application of Genetic Algorithms" *Design of linear and planar arrays using genetic algorithms *Application of genetic algorithms to the design of broadband, wire, and integrated antennas *Genetic algorithm—driven design of dielectric gratings and frequency-selective surfaces *Synthesis of magnetostatic devices using genetic algorithms *Application of genetic algorithms to multiobjective electromagnetic backscattering optimization *A comprehensive list of the up-to-date references applicable to electromagneticdesign problemsSupplemented with more than 250 illustrations, Electromagnetic Optimization by Genetic Algorithms is a powerful resource for electrical engineers interested in modern electromagnetic designs and an indispensable reference for university researchers.

Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications

Abstract: Mushroom-like electromagnetic band-gap (EBG) structures exhibit unique electromagnetic properties that have led to a wide range of electromagnetic device applications. This paper focuses on the reflection phase feature of EBG surfaces: when plane waves normally illuminate an EBG structure, the phase of the reflected field changes continuously from 180/spl deg/ to -180/spl deg/ versus frequency. One important application of this feature is that one can replace a conventional perfect electric conductor (PEC) ground plane with an EBG ground plane for a low profile wire antenna design. For this design, the operational frequency band of an EBG structure is defined as the frequency region within which a low profile wire antenna radiates efficiently, namely, having a good return loss and radiation patterns. The operational frequency band is the overlap of the input-match frequency band and the surface-wave frequency bandgap. It is revealed that the reflection phase curve can be used to identify the input-match frequency band inside of which a low profile wire antenna exhibits a good return loss. The surface-wave frequency bandgap of the EBG surface that helps improve radiation patterns is very close to its input-match frequency band, resulting in an effective operational frequency band. In contrast, a thin grounded slab cannot work efficiently as a ground plane for low profile wire antennas because its surface-wave frequency bandgap and input-match frequency band do not overlap. Parametric studies have been performed to obtain design guidelines for EBG ground planes. Two novel EBG ground planes with interesting electromagnetic features are also presented. The rectangular patch EBG ground plane has a polarization dependent reflection phase and the slotted patch EBG ground plane shows a compact size.

Electromagnetic scattering by surfaces of arbitrary shape

Abstract: The electric field integral equation (EFIE) is used with the moment method to develop a simple and efficient numerical procedure for treating problems of scattering by arbitrarily shaped objects. For numerical purposes, the objects are modeled using planar triangular surfaces patches. Because the EFIE formulation is used, the procedure is applicable to both open and closed surfaces. Crucial to the numerical formulation is the development of a set of special subdomain-type basis functions which are defined on pairs of adjacent triangular patches and yield a current representation free of line or point charges at subdomain boundaries. The method is applied to the scattering problems of a plane wave illuminated flat square plate, bent square plate, circular disk, and sphere. Excellent correspondence between the surface current computed via the present method and that obtained via earlier approaches or exact formulations is demonstrated in each case.

High-impedance electromagnetic surfaces with a forbidden frequency band

Abstract: A new type of metallic electromagnetic structure has been developed that is characterized by having high surface impedance. Although it is made of continuous metal, and conducts dc currents, it does not conduct ac currents within a forbidden frequency band. Unlike normal conductors, this new surface does not support propagating surface waves, and its image currents are not phase reversed. The geometry is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements, and distributed in a two-dimensional lattice. The surface can be described using solid-state band theory concepts, even though the periodicity is much less than the free-space wavelength. This unique material is applicable to a variety of electromagnetic problems, including new kinds of low-profile antennas.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Particle swarm optimization in electromagnetics

Abstract: The particle swarm optimization (PSO), new to the electromagnetics community, is a robust stochastic evolutionary computation technique based on the movement and intelligence of swarms. This paper introduces a conceptual overview and detailed explanation of the PSO algorithm, as well as how it can be used for electromagnetic optimizations. This paper also presents several results illustrating the swarm behavior in a PSO algorithm developed by the authors at UCLA specifically for engineering optimizations (UCLA-PSO). Also discussed is recent progress in the development of the PSO and the special considerations needed for engineering implementation including suggestions for the selection of parameter values. Additionally, a study of boundary conditions is presented indicating the invisible wall technique outperforms absorbing and reflecting wall techniques. These concepts are then integrated into a representative example of optimization of a profiled corrugated horn antenna.