Photoconductive antennas (PCAs) have been extensively utilized for the generation and detection of both pulsed broadband and single frequency continuous wave terahertz (THz) band radiation. These devices form the basis of many THz imaging and spectroscopy systems, which have demonstrated promising applications in various industries and research fields. The development of THz PCA technology through the last 30 years is reviewed. The key modalities of improving device performance are identified, and literature is reviewed to summarize the progress made in these areas. The goal of this review is to provide a collection of all relevant literature to bring researchers up to date on the current state and remaining challenges of THz PCA technology.

https://www.spiedigitallibrary.org/journals/optical-engineering/volume-56/issue-1/010901/Review-of-terahertz-photoconductive-antenna-technology/10.1117/1.OE.56.1.010901.pdf

Review of terahertz photoconductive antenna technology

Advances, limitations and prospects of nondestructive testing and evaluation of thick composites and sandwich structures: A state-of-the-art review

Glass fiber-reinforced composite laminates in polyetherimide resin have been studied via terahertz imaging and ultrasonic C-scans. The forced delamination is created by inserting Teflon film between various layers inside the samples prior to consolidating the laminates. Using reflective pulsed terahertz imaging, we find high-resolution, low-artifact terahertz C-scan and B-scan images locating and sizing the delamination in three dimensions. Furthermore, terahertz imaging enables us to determine the thicknesses of the delamination and of the layers constituting the laminate. Ultrasonic C-scan images are also successfully obtained; however, in our samples with small thickness-to-wavelength ratio, detailed ultrasonic B-scan images providing quantitative information in depth cannot be obtained by 5 MHz or 10 MHz focused transducers. Comparative analysis between terahertz imaging and ultrasonic C-scans with regard to spatial resolution is carried out demonstrating that terahertz imaging provides higher spatial resolution for imaging, and can be regarded as an alternative or complementary modality to ultrasonic C-scans for this class of glass fiber-reinforced composites.

/pdf/nondestructive-evaluation-of-forced-delamination-in-glass-1pprgtb9ey.pdf

Nondestructive evaluation of forced delamination in glass fiber-reinforced composites by terahertz and ultrasonic waves

Nondestructive quality inspection with terahertz waves has become an emerging technology, especially in the automotive and aviation industries. Depending on the specific application, different terahertz systems—either fully electronic or based on optical laser pulses—cover the terahertz frequency region from 0.1 THz up to nearly 10 THz and provide high-speed volume inspections on the one hand and high-resolution thickness determination on the other hand. In this paper, we present different industrial applications, which we have addressed with our terahertz systems within the last couple of years. First, we show three-dimensional imaging of glass fiber–reinforced composites and foam structures, and demonstrate thickness determination of multilayer plastic tube walls. Then, we present the characterization of known and unknown multilayer systems down to some microns and the possibility of measuring the thickness of wet paints. The challenges of system reliability in industrial environments, e.g., under the impact of vibrations, and effective solutions are discussed. This paper gives an overview of state-of-the-art terahertz technology for industrial quality inspection. The presented principles are not limited to the automotive and aviation industries but can also be adapted to many other industrial fields.

/pdf/terahertz-quality-inspection-for-automotive-and-aviation-4nwk8yh1ax.pdf

Terahertz Quality Inspection for Automotive and Aviation Industries

Nowadays, composite materials are widely used in building and construction industry, in motor-vehicles, spacecrafts and aircrafts, and in biomedical science due to the ability of combining various consistent components for manufacturing composite materials with physical and chemical properties significantly different from the properties of each component. Polymer composite materials (PCMs) appear to be the most common type of composites. PCMs consist mainly of polymer binder reinforced with the glass-fiber-fabric. Although PCMs are widely applied, PCM manufacturing technology lacks the methods of non- destructive testing. In this paper we demonstrate that terahertz (THz) pulsed spectroscopy (TPS) appears to be a unique instrument for solving important problems of PCM manufacturing control. We experimentally demonstrate the efficiency of TPS for non-destructive control of PCM binder polymerization, since THz radiation is sensitive to changes of picosecond dynamics in media. Furthermore, we show the ability to detect the internal non-impregnated voids inside the PCM structure by means of THz time-of-flight tomography. These results highlight the potentials of TPS applications for non-destructive control of PCM manufacturing process.

Non-Destructive Evaluation of Polymer Composite Materials at the Manufacturing Stage Using Terahertz Pulsed Spectroscopy

The usability of pulsed broadband terahertz radiation for the inspection of composite materials from the aeronautics industry is investigated, with the goal of developing a mobile time-domain spectroscopy system that operates in reflection geometry. A wide range of samples based on glass and carbon fiber reinforced plastics with various types of defects is examined using an imaging system; the results are evaluated both in time and frequency domain. The conductivity of carbon fibers prevents penetration of the respective samples but also allows analysis of coatings from the reflected THz pulses. Glass fiber composites are, in principle, transparent for THz radiation, but commonly with significant absorption for wavelengths >1  THz . Depending on depth, matrix material, and size, defects like foreign material inserts, delaminations, or moisture contamination can be visualized. If a defect is not too deep in the sample, its location can be correctly identified from the delay between partial reflections at the surface and the defect itself.

https://hal.archives-ouvertes.fr/hal-00942971/document

Yehuda Sternberg

Papers

Aeronautics composite material inspection with a terahertz time-domain spectroscopy system