scispace - formally typeset
Search or ask a question
Author

Yeong Don Park

Bio: Yeong Don Park is an academic researcher from Incheon National University. The author has contributed to research in topics: Thin film & Organic semiconductor. The author has an hindex of 34, co-authored 98 publications receiving 4564 citations. Previous affiliations of Yeong Don Park include Pohang University of Science and Technology & University of California, Santa Barbara.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, a self-aligned regioregular poly(3-hexylthiophene) (P3HT) has been used to control the intermolecular interaction at the interface between P3HT and the insulator substrate by using self-assembled monolayers (SAMs) functionalized with various groups (NH2, NH2, OH, and CH3).
Abstract: With the aim of enhancing the field-effect mobility by promoting surface-mediated two-dimensional molecular ordering in self-aligned regioregular poly(3-hexylthiophene) (P3HT) we have controlled the intermolecular interaction at the interface between P3HT and the insulator substrate by using self-assembled monolayers (SAMs) functionalized with various groups (–NH2, –OH, and –CH3). We have found that, depending on the properties of the substrate surface, the P3HT nanocrystals adopt two different orientations—parallel and perpendicular to the insulator substrate—which have field-effect mobilities that differ by more than a factor of 4, and that are as high as 0.28 cm2 V–1 s–1. This surprising increase in field-effect mobility arises in particular for the perpendicular orientation of the nanocrystals with respect to the insulator substrate. Further, the perpendicular orientation of P3HT nanocrystals can be explained by the following factors: the unshared electron pairs of the SAM end groups, the π–H interactions between the thienyl-backbone bearing π-systems and the H (hydrogen) atoms of the SAM end groups, and interdigitation between the alkyl chains of P3HT and the alkyl chains of the SAMs.

428 citations

Journal ArticleDOI
TL;DR: In this article, the influence of evaporation-induced flow in a single droplet on the crystalline microstructure and film morphology of an ink-jet-printed organic semiconductor, 6,13-bis((triisopropylsilylethynyl) pentacene (TIPS_PEN), by varying the composition of the solvent mixture was demonstrated.
Abstract: We have demonstrated the influence of evaporation-induced flow in a single droplet on the crystalline microstructure and film morphology of an ink-jet-printed organic semiconductor, 6,13-bis((triisopropylsilylethynyl) pentacene (TIPS_PEN), by varying the composition of the solvent mixture. The ringlike deposits induced by outward convective flow in the droplets have a randomly oriented crystalline structure. The addition of dichlorobenzene as an evaporation control agent results in a homogeneous film morphology due to slow evaporation, but the molecular orientation of the film is undesirable in that it is similar to that of the ring-deposited films. However, self-aligned TIPS_PEN crystals with highly ordered crystalline structures were successfully produced when dodecane was added. Dodecane has a high boiling point and a low surface tension, and its addition to the solvent results in a recirculation flow in the droplets that is induced by a Marangoni flow (surface-tension-driven flow), which arises during the drying processes in the direction opposite to the convective flow. The field-effect transistors fabricated with these self-aligned crystals via ink-jet printing exhibit significantly improved performance with an average effective field-effect mobility of 0.12 cm2 V–1 s–1. These results demonstrate that with the choice of appropriate solvent ink-jet printing is an excellent method for the production of organic semiconductor films with uniform morphology and desired molecular orientation for the direct-write fabrication of high-performance organic electronics.

414 citations

Journal ArticleDOI
TL;DR: In this article, the authors review recent progress in interface engineering for the fabrication of high-performance OFETs and, in particular, engineering of the interfaces between semiconductors and insulators, and the effects of interfacial characteristics on the molecular and mesoscale structures of π-conjugated molecules and the performance of OFET devices.

290 citations

Journal ArticleDOI
TL;DR: It is shown that when a solution processable organic semiconductor (6,13-bis(triisopropylsilylethynyl)pentacene) is blended with an insulating polymer (PS), morphological and structural characteristics of the blend films could be significantly influenced by the processing conditions like the spin coating time.
Abstract: Blending organic semiconductors with insulating polymers has been known to be an effective way to overcome the disadvantages of single-component organic semiconductors for high-performance organic field-effect transistors (OFETs). We show that when a solution processable organic semiconductor (6,13-bis(triisopropylsilylethynyl)pentacene, TIPS-pentacene) is blended with an insulating polymer (PS), morphological and structural characteristics of the blend films could be significantly influenced by the processing conditions like the spin coating time. Although vertical phase-separated structures (TIPS-pentacene-top/PS-bottom) were formed on the substrate regardless of the spin coating time, the spin time governed the growth mode of the TIPS-pentacene molecules that phase-separated and crystallized on the insulating polymer. Excess residual solvent in samples spun for a short duration induces a convective flow in the drying droplet, thereby leading to one-dimensional (1D) growth mode of TIPS-pentacene crystals. In contrast, after an appropriate spin-coating time, an optimum amount of the residual solvent in the film led to two-dimensional (2D) growth mode of TIPS-pentacene crystals. The 2D spherulites of TIPS-pentacene are extremely advantageous for improving the field-effect mobility of FETs compared to needle-like 1D structures, because of the high surface coverage of crystals with a unique continuous film structure. In addition, the porous structure observed in the 2D crystalline film allows gas molecules to easily penetrate into the channel region, thereby improving the gas sensing properties.

243 citations


Cited by
More filters
Journal ArticleDOI
Chengliang Wang1, Huanli Dong1, Wenping Hu1, Yunqi Liu1, Daoben Zhu1 
TL;DR: The focus of this review will be on the performance analysis of π-conjugated systems in OFETs, a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals that provide an important insight into the charge transport of ρconjugate systems.
Abstract: Since the discovery of highly conducting polyacetylene by Shirakawa, MacDiarmid, and Heeger in 1977, π-conjugated systems have attracted much attention as futuristic materials for the development and production of the next generation of electronics, that is, organic electronics. Conceptually, organic electronics are quite different from conventional inorganic solid state electronics because the structural versatility of organic semiconductors allows for the incorporation of functionality by molecular design. This versatility leads to a new era in the design of electronic devices. To date, the great number of π-conjugated semiconducting materials that have either been discovered or synthesized generate an exciting library of π-conjugated systems for use in organic electronics. 11 However, some key challenges for further advancement remain: the low mobility and stability of organic semiconductors, the lack of knowledge regarding structure property relationships for understanding the fundamental chemical aspects behind the structural design, and realization of desired properties. Organic field-effect transistors (OFETs) are a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals (drain, source, and gate electrodes). OFETs are not only essential building blocks for the next generation of cheap and flexible organic circuits, but they also provide an important insight into the charge transport of πconjugated systems. Therefore, they act as strong tools for the exploration of the structure property relationships of πconjugated systems, such as parameters of field-effect mobility (μ, the drift velocity of carriers under unit electric field), current on/off ratio (the ratio of the maximum on-state current to the minimum off-state current), and threshold voltage (the minimum gate voltage that is required to turn on the transistor). 17 Since the discovery of OFETs in the 1980s, they have attracted much attention. Research onOFETs includes the discovery, design, and synthesis of π-conjugated systems for OFETs, device optimization, development of applications in radio frequency identification (RFID) tags, flexible displays, electronic papers, sensors, and so forth. It is beyond the scope of this review to cover all aspects of π-conjugated systems; hence, our focus will be on the performance analysis of π-conjugated systems in OFETs. This should make it possible to extract information regarding the fundamental merit of semiconducting π-conjugated materials and capture what is needed for newmaterials and what is the synthesis orientation of newπ-conjugated systems. In fact, for a new science with many practical applications, the field of organic electronics is progressing extremely rapidly. For example, using “organic field effect transistor” or “organic field effect transistors” as the query keywords to search the Web of Science citation database, it is possible to show the distribution of papers over recent years as shown in Figure 1A. It is very clear

2,942 citations

Journal ArticleDOI
TL;DR: In this article, a review of π-conjugated polymeric semiconductors for organic thin-film (or field effect) transistors (OTFTs or OFETs) and bulk-heterojunction photovoltaic (or solar) cell (BHJ-OPV or OSC) applications are summarized and analyzed.
Abstract: The optoelectronic properties of polymeric semiconductor materials can be utilized for the fabrication of organic electronic and photonic devices. When key structural requirements are met, these materials exhibit unique properties such as solution processability, large charge transporting capabilities, and/or broad optical absorption. In this review recent developments in the area of π-conjugated polymeric semiconductors for organic thin-film (or field-effect) transistors (OTFTs or OFETs) and bulk-heterojunction photovoltaic (or solar) cell (BHJ-OPV or OSC) applications are summarized and analyzed.

2,076 citations

Journal ArticleDOI
TL;DR: This Progress Report provides an update on recent developments in inkjet printing technology and its applications, which include organic thin-film transistors, light-emitting diodes, solar cells, conductive structures, memory devices, sensors, and biological/pharmaceutical tasks.
Abstract: In this Progress Report we provide an update on recent developments in inkjet printing technology and its applications, which include organic thin-film transistors, light-emitting diodes, solar cells, conductive structures, memory devices, sensors, and biological/pharmaceutical tasks. Various classes of materials and device types are in turn examined and an opinion is offered about the nature of the progress that has been achieved.

2,019 citations