Sphere Packings, Lattices and Groups

This document provides updates to IEEE Std 802.16's MIB for the MAC, PHY and asso- ciated management procedures in order to accommodate recent extensions to the standard.

IEEE Standard for Local and Metropolitan Area Networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems Draft Amendment: Management Information Base Extensions

This paper provides a comprehensive review of the domain of physical layer security in multiuser wireless networks. The essential premise of physical layer security is to enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without relying on higher-layer encryption. This can be achieved primarily in two ways: without the need for a secret key by intelligently designing transmit coding strategies, or by exploiting the wireless communication medium to develop secret keys over public channels. The survey begins with an overview of the foundations dating back to the pioneering work of Shannon and Wyner on information-theoretic security. We then describe the evolution of secure transmission strategies from point-to-point channels to multiple-antenna systems, followed by generalizations to multiuser broadcast, multiple-access, interference, and relay networks. Secret-key generation and establishment protocols based on physical layer mechanisms are subsequently covered. Approaches for secrecy based on channel coding design are then examined, along with a description of inter-disciplinary approaches based on game theory and stochastic geometry. The associated problem of physical layer message authentication is also briefly introduced. The survey concludes with observations on potential research directions in this area.

/pdf/principles-of-physical-layer-security-in-multiuser-wireless-3w4jvwpgy4.pdf

Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey

The fifth generation (5G) wireless communication networks are being deployed worldwide from 2020 and more capabilities are in the process of being standardized, such as mass connectivity, ultra-reliability, and guaranteed low latency. However, 5G will not meet all requirements of the future in 2030 and beyond, and sixth generation (6G) wireless communication networks are expected to provide global coverage, enhanced spectral/energy/cost efficiency, better intelligence level and security, etc. To meet these requirements, 6G networks will rely on new enabling technologies, i.e., air interface and transmission technologies and novel network architecture, such as waveform design, multiple access, channel coding schemes, multi-antenna technologies, network slicing, cell-free architecture, and cloud/fog/edge computing. Our vision on 6G is that it will have four new paradigm shifts. First, to satisfy the requirement of global coverage, 6G will not be limited to terrestrial communication networks, which will need to be complemented with non-terrestrial networks such as satellite and unmanned aerial vehicle (UAV) communication networks, thus achieving a space-air-ground-sea integrated communication network. Second, all spectra will be fully explored to further increase data rates and connection density, including the sub-6 GHz, millimeter wave (mmWave), terahertz (THz), and optical frequency bands. Third, facing the big datasets generated by the use of extremely heterogeneous networks, diverse communication scenarios, large numbers of antennas, wide bandwidths, and new service requirements, 6G networks will enable a new range of smart applications with the aid of artificial intelligence (AI) and big data technologies. Fourth, network security will have to be strengthened when developing 6G networks. This article provides a comprehensive survey of recent advances and future trends in these four aspects. Clearly, 6G with additional technical requirements beyond those of 5G will enable faster and further communications to the extent that the boundary between physical and cyber worlds disappears.

/pdf/towards-6g-wireless-communication-networks-vision-enabling-2tj7a36yux.pdf

Towards 6G wireless communication networks: vision, enabling technologies, and new paradigm shifts

This paper attempts to clarify the difference between visible light communication (VLC) and light-fidelity (LiFi). In particular, it will show how LiFi takes VLC further by using light emitting diodes (LEDs) to realise fully networked wireless systems. Synergies are harnessed as luminaries become LiFi attocells resulting in enhanced wireless capacity providing the necessary connectivity to realise the Internet-of-Things, and contributing to the key performance indicators for the fifth generation of cellular systems (5G) and beyond. It covers all of the key research areas from LiFi components to hybrid LiFi/wireless fidelity (WiFi) networks to illustrate that LiFi attocells are not a theoretical concept any more, but at the point of real-world deployment.

What is LiFi

The recently proposed orthogonal time–frequency–space (OTFS) modulation technique was shown to provide significant error performance advantages over orthogonal frequency division multiplexing (OFDM) over delay-Doppler channels. In this paper, we first derive the explicit input–output relation describing OTFS modulation and demodulation (mod/demod). We then analyze the cases of: 1) ideal pulse-shaping waveforms that satisfy the bi-orthogonality conditions and 2) rectangular waveforms which do not. We show that while only inter-Doppler interference (IDI) is present in the former case, additional inter-carrier interference (ICI) and inter-symbol interference (ISI) occur in the latter case. We next characterize the interferences and develop a novel low-complexity yet efficient message passing (MP) algorithm for joint interference cancellation (IC) and symbol detection. While ICI and ISI are eliminated through appropriate phase shifting, IDI can be mitigated by adapting the MP algorithm to account for only the largest interference terms. The MP algorithm can effectively compensate for a wide range of channel Doppler spreads. Our results indicate that OTFS using practical rectangular waveforms can achieve the performance of OTFS using ideal but non-realizable pulse-shaping waveforms. Finally, simulation results demonstrate the superior error performance gains of the proposed uncoded OTFS schemes over OFDM under various channel conditions.

Interference Cancellation and Iterative Detection for Orthogonal Time Frequency Space Modulation

In this paper, we model $M\times N$ orthogonal time frequency space modulation (OTFS) over a $P$ -path doubly dispersive channel with delays less than $\tau _{\max }$ and Doppler shifts in the range $(\nu _{\min },\nu _{\max })$ . We first derive in a simple matrix form the input–output relation in the delay-Doppler domain for practical (e.g., rectangular) pulse-shaping waveforms, next generalize it to arbitrary waveforms. This relation extends the original OTFS input–output approach, which assumes ideal pulse-shaping waveforms that are bi-orthogonal in both time and frequency. We show that the OTFS input–output relation has a simple sparse structure that enables one to use low-complexity detection algorithms. Different from previous work, only a single cyclic prefix is added at the end of the OTFS frame, significantly reducing the overhead, without incurring any penalty from the loss of bi-orthogonality of the pulse-shaping waveforms. Finally, we compare the OTFS performance with different pulse-shaping waveforms, and show that the reduction of out-of-band power may introduce nonuniform channel gains for the transmitted symbols, thus impairing the overall error performance.

Practical Pulse-Shaping Waveforms for Reduced-Cyclic-Prefix OTFS

Orthogonal time frequency space (OTFS) modulation was shown to provide significant error performance advantages over orthogonal frequency division multiplexing (OFDM) in delay–Doppler channels. In order to detect OTFS modulated data, the channel impulse response needs to be known at the receiver. In this paper, we propose embedded pilot-aided channel estimation schemes for OTFS. In each OTFS frame, we arrange pilot, guard, and data symbols in the delay–Doppler plane to suitably avoid interference between pilot and data symbols at the receiver. We develop such symbol arrangements for OTFS over multipath channels with integer and fractional Doppler shifts, respectively. At the receiver, channel estimation is performed based on a threshold method and the estimated channel information is used for data detection via a message passing algorithm. Thanks to our specific embedded symbol arrangements, both channel estimation and data detection are performed within the same OTFS frame with minimum overhead. We compare through simulations the error performance of OTFS using the proposed channel estimation and OTFS with ideally known channel information and observe only a marginal performance loss. We also demonstrate that the proposed channel estimation in OTFS significantly outperforms OFDM with known channel information. Finally, we present extensions of the proposed schemes to multiple-input multiple-output (MIMO) and multi-user uplink/downlink.

Embedded Pilot-Aided Channel Estimation for OTFS in Delay–Doppler Channels

We focus on full-rate, fast-decodable space-time block codes (STBCs) for 2 times 2 and 4times2 multiple-input multiple-output (MIMO) transmission. We first derive conditions and design criteria for reduced-complexity maximum-likelihood (ML) decodable 2times2 STBCs, and we apply them to two families of codes that were recently discovered. Next, we derive a novel reduced-complexity 4times2 STBC, and show that it outperforms all previously known codes with certain constellations.

/pdf/on-fast-decodable-space-time-block-codes-gp4og50mxu.pdf

On Fast-Decodable Space–Time Block Codes

Unipolar communications systems can transmit information using only real and positive signals. This includes a variety of physical channels ranging from optical (fiber or free-space), to RF wireless using amplitude modulation with non-coherent reception, to baseband single wire communications. Unipolar OFDM techniques enable to efficiently compensate frequency selective distortion in the unipolar communication systems. One of the leading examples of unipolar OFDM is asymmetric clipped optical OFDM (ACO-OFDM) originally proposed for optical communications. Flip-OFDM is an alternative approach that was proposed in a patent, but its performance and full potentials have never been investigated in the literature. In this paper, we first compare Flip-OFDM and ACO-OFDM, and show that both techniques have the same performance but different complexities (Flip-OFDM offers 50% saving). We then propose a new detection scheme, which enables to reduce the noise at the Flip-OFDM receiver by almost 3dB. The analytical performance of the noise filtering schemes is supported by the simulation results.

Yi Hong

Papers

Interference Cancellation and Iterative Detection for Orthogonal Time Frequency Space Modulation

Practical Pulse-Shaping Waveforms for Reduced-Cyclic-Prefix OTFS

Embedded Pilot-Aided Channel Estimation for OTFS in Delay–Doppler Channels

On Fast-Decodable Space–Time Block Codes

Flip-OFDM for Unipolar Communication Systems