Yifeng Shi

Bio: Yifeng Shi is an academic researcher from Fudan University. The author has contributed to research in topics: Mesoporous material & Mesoporous silica. The author has an hindex of 21, co-authored 35 publications receiving 5507 citations. Previous affiliations of Yifeng Shi include University of California, Santa Barbara & Hangzhou Normal University.

Ordered Mesoporous Polymers and Homologous Carbon Frameworks: Amphiphilic Surfactant Templating and Direct Transformation

Abstract: Organic porous materials—a class of advanced materials— possess enormous potential for many high-tech applications, such as bioreactors, dielectrics, sensors, microelectrophoresis, thermal insulation, and catalysts. In general, they can be prepared by phase separation, and a hard templating approach, such as those employing colloidal particles. Phase separation can be derived from organic– organic phases, while the pore structures can be formed after etching, or by dissolving one block (A) from the assembled block copolymer (A–B). However, most of the resulting porous polymer structures are disordered with wide pore size distributions because of the contraction and swelling from changes in volume, as well as the structured defects formed during template removal. Large porosities have rarely been reported. Furthermore, the resistance of the pore structure to heat and solvents is rather low because the materials are formed by weak van der Waals forces and physical twists between polymer chains, which means that the framework is not connected by covalent bonds. Recently, a procedure for cross-linking lyotropic liquid crystals (LLC) in water was introduced to prepare periodic porous organic mesostructures. Unfortunately, polymerization only occurs between nearest neighboring head groups, and the mesostructured channels are fully occupied with solution. Therefore, it is not surprising that porosity has yet to be reported. Carbon materials, including nanotubes and fullerenes, have attracted considerable attention because of their remarkable properties. The traditional carbonization process for active carbon and related materials can only generate

A Family of Highly Ordered Mesoporous Polymer Resin and Carbon Structures from Organic−Organic Self-Assembly

Abstract: The syntheses of a family of highly ordered mesoporous polymers and carbon frameworks from organic−organic assembly of triblock copolymers with soluble, low-molecular-weight phenolic resin precursors (resols) by an evaporation induced self-assembly strategy have been reported in detail. The family members include two-dimensional hexagonal (space group, p6m), three-dimensional bicontinuous (Ia3d), body-centered cubic (Im3m), and lamellar mesostructures, which are controlled by simply adjusting the ratio of phenol/template or poly(ethylene oxide)/poly(propylene oxide) in the templates. A five-step mechanism from organic−organic assembly has been demonstrated. Cubic FDU-14 with a gyroidal mesostructure of polymer resin or carbon has been synthesized for the first time by using the copolymer Pluronic P123 as a template in a relatively narrow range. Upon calcination at 350 °C, the templates should be removed to obtain mesoporous polymers, and further heating at above a critical temperature of 600 °C transfor...

Ordered mesoporous silicas and carbons with large accessible pores templated from amphiphilic diblock copolymer poly(ethylene oxide)-b-polystyrene.

Abstract: Highly ordered mesoporous carbons and silicas with ultralarge accessible pores have been successfully synthesized by using laboratory-made poly(ethylene oxide)-b-polystyrene (PEO-b-PS) diblock copolymers as templates via the evaporation-induced self-assembly (EISA) approach. Resols and tetraethyl orthosilicate (TEOS) serve as carbon and silica precursors, respectively. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) measurements show that the mesoporous carbons (denoted as C-FDU-18) possess face centered cubic closed-packing (fcc) mesostructure (Fm3m) with large-domain ordering. N2 sorption isotherms reveal a large mesopore at the mean value of 22.6 nm with a narrow pore-size distribution. Mesoporous silicas (Si-FDU-18) also display a highly ordered fcc closed-packing mesostructure with an ultralarge unit cell (a = 54.6 nm). A hydrothermal recrystallization was introduced for the first time to produce micropores in thick silica walls (∼7.7 nm) and thus to generate ultralarg...

A review of electrode materials for electrochemical supercapacitors

Abstract: In this critical review, metal oxides-based materials for electrochemical supercapacitor (ES) electrodes are reviewed in detail together with a brief review of carbon materials and conducting polymers. Their advantages, disadvantages, and performance in ES electrodes are discussed through extensive analysis of the literature, and new trends in material development are also reviewed. Two important future research directions are indicated and summarized, based on results published in the literature: the development of composite and nanostructured ES materials to overcome the major challenge posed by the low energy density of ES (476 references).

Carbon-based materials as supercapacitor electrodes

Abstract: This tutorial review provides a brief summary of recent research progress on carbon-based electrode materials for supercapacitors, as well as the importance of electrolytes in the development of supercapacitor technology. The basic principles of supercapacitors, the characteristics and performances of various nanostructured carbon-based electrode materials are discussed. Aqueous and non-aqueous electrolyte solutions used in supercapacitors are compared. The trend on future development of high-power and high-energy supercapacitors is analyzed.

Advanced Materials for Energy Storage

Abstract: [Liu, Chang; Li, Feng; Ma, Lai-Peng; Cheng, Hui-Ming] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China.;Cheng, HM (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China;cheng@imr.ac.cn

Engineering the surface structure of MoS2 to preferentially expose active edge sites for electrocatalysis

Abstract: Controlling surface structure at the atomic scale is paramount to developing effective catalysts. For example, the edge sites of MoS(2) are highly catalytically active and are thus preferred at the catalyst surface over MoS(2) basal planes, which are inert. However, thermodynamics favours the presence of the basal plane, limiting the number of active sites at the surface. Herein, we engineer the surface structure of MoS(2) to preferentially expose edge sites to effect improved catalysis by successfully synthesizing contiguous large-area thin films of a highly ordered double-gyroid MoS(2) bicontinuous network with nanoscaled pores. The high surface curvature of this catalyst mesostructure exposes a large fraction of edge sites, which, along with its high surface area, leads to excellent activity for electrocatalytic hydrogen evolution. This work elucidates how morphological control of materials at the nanoscale can significantly impact the surface structure at the atomic scale, enabling new opportunities for enhancing surface properties for catalysis and other important technological applications.

Polymeric Graphitic Carbon Nitride as a Heterogeneous Organocatalyst: From Photochemistry to Multipurpose Catalysis to Sustainable Chemistry

Abstract: Polymeric graphitic carbon nitride materials (for simplicity: g-C(3)N(4)) have attracted much attention in recent years because of their similarity to graphene. They are composed of C, N, and some minor H content only. In contrast to graphenes, g-C(3)N(4) is a medium-bandgap semiconductor and in that role an effective photocatalyst and chemical catalyst for a broad variety of reactions. In this Review, we describe the "polymer chemistry" of this structure, how band positions and bandgap can be varied by doping and copolymerization, and how the organic solid can be textured to make it an effective heterogenous catalyst. g-C(3)N(4) and its modifications have a high thermal and chemical stability and can catalyze a number of "dream reactions", such as photochemical splitting of water, mild and selective oxidation reactions, and--as a coactive catalytic support--superactive hydrogenation reactions. As carbon nitride is metal-free as such, it also tolerates functional groups and is therefore suited for multipurpose applications in biomass conversion and sustainable chemistry.