Yimin Xuan

Bio: Yimin Xuan is an academic researcher from Nanjing University of Science and Technology. The author has contributed to research in topic(s): Nanofluids in solar collectors & Thermal fluids. The author has an hindex of 2, co-authored 2 publication(s) receiving 4483 citation(s).

Investigation on Convective Heat Transfer and Flow Features of Nanofluids

Abstract: Low thermal conductivity is a primary limitation in the development of energy-efficient heat transfer fluids that are required in many industrial applications. In this paper we propose that an innovative new class of heat transfer fluids can be engineered by suspending metallic nanoparticles in conventional heat transfer fluids. The resulting {open_quotes}nanofluids{close_quotes} are expected to exhibit high thermal conductivities compared to those of currently used heat transfer fluids, and they represent the best hope for enhancement of heat transfer. The results of a theoretical study of the thermal conductivity of nanofluids with copper nanophase materials are presented, the potential benefits of the fluids are estimated, and it is shown that one of the benefits of nanofluids will be dramatic reductions in heat exchanger pumping power.

Spectral Features of an Omnidirectional Narrowband Emitter

Abstract: A microscale-structured surface consisting of heavily doped silicon rectangle grating and slotted silver layer is studied for omnidirectional narrowband emitter. Numerical simulation is implemented to obtain spectral emittance in mid-infrared region (6–16 μm) for the transverse magnetic incidence by using the rigorous coupled-wave analysis (RCWA) method. The effects of structural parameters and incident angle on its spectral emittance are investigated. In virtue of the microcavity effect, an omnidirectional narrowband emitter is proposed. By selecting a group of structural parameters, its peak emittance reaches as high as 0.998, and the peak width Δλ/λ of the emittance peak is as narrow as 0.03 at the specified wavelength. The results reveal that our proposed structured surface has the nice spectral features of angular uniformity and wavelength-selective characteristic, which can be applied to design novel narrowband thermal emitters and detectors in the infrared region.

Convective Transport in Nanofluids

Abstract: Nanofluids are engineered colloids made of a base fluid and nanoparticles (1-100 nm) Nanofluids have higher thermal conductivity' and single-phase heat transfer coefficients than their base fluids In particular the heat transfer coefficient increases appear to go beyond the mere thermal-conductivity effect, and cannot be predicted by traditional pure-fluid correlations such as Dittus-Boelter's In the nanofluid literature this behavior is generally attributed to thermal dispersion and intensified turbulence, brought about by nanoparticle motion To test the validity of this assumption, we have considered seven slip mechanisms that can produce a relative velocity between the nanoparticles and the base fluid These are inertia, Brownian diffusion, thermophoresis, diffusioplwresis, Magnus effect, fluid drainage, and gravity We concluded that, of these seven, only Brownian diffusion and thermophoresis are important slip mechanisms in nanofluids Based on this finding, we developed a two-component four-equation nonhomogeneous equilibrium model for mass, momentum, and heat transport in nanofluids A nondimensional analysis of the equations suggests that energy transfer by nanoparticle dispersion is negligible, and thus cannot explain the abnormal heat transfer coefficient increases Furthermore, a comparison of the nanoparticle and turbulent eddy time and length scales clearly indicates that the nanoparticles move homogeneously with the fluid in the presence of turbulent eddies so an effect on turbulence intensity is also doubtful Thus, we propose an alternative explanation for the abnormal heat transfer coefficient increases: the nanofluid properties may vary significantly within the boundary layer because of the effect of the temperature gradient and thermophoresis For a heated fluid, these effects can result in a significant decrease of viscosity within the boundary layer, thus leading to heat transfer enhancement A correlation structure that captures these effects is proposed

Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids

Abstract: Heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids is investigated for various pertinent parameters. A model is developed to analyze heat transfer performance of nanofluids inside an enclosure taking into account the solid particle dispersion. The transport equations are solved numerically using the finite-volume approach along with the alternating direct implicit procedure. Comparisons with previously published work on the basis of special cases are performed and found to be in excellent agreement. The effect of suspended ultrafine metallic nanoparticles on the fluid flow and heat transfer processes within the enclosure is analyzed and effective thermal conductivity enhancement maps are developed for various controlling parameters. In addition, an analysis of variants based on the thermophysical properties of nanofluid is developed and presented. It is shown that the variances within different models have substantial effects on the results. Finally, a heat transfer correlation of the average Nusselt number for various Grashof numbers and volume fractions is presented.

Heat transfer enhancement of nanofluids

Abstract: This paper presents a procedure for preparing a nanofluid which is a suspension consisting of nanophase powders and a base liquid. By means of the procedure, some sample nanofluids are prepared. Their TEM photographs are given to illustrate the stability and evenness of suspension. The theoretical study of the thermal conductivity of nanofluids is introduced. The hot-wire apparatus is used to measure the thermal conductivity of nanofluids with suspended copper nanophase powders. Some factors such as the volume fraction, dimensions, shapes and properties of the nanoparticles are discussed. A theoretical model is proposed to describe heat transfer performance of the nanofluid flowing in a tube, with accounting for dispersion of solid particles.

Thermal Conductivity of Nanoparticle -Fluid Mixture

Abstract: Effective thermal conductivity of mixtures of e uids and nanometer-size particles is measured by a steady-state parallel-plate method. The tested e uids contain two types of nanoparticles, Al 2O3 and CuO, dispersed in water, vacuum pump e uid, engine oil, and ethylene glycol. Experimental results show that the thermal conductivities of nanoparticle ‐e uid mixtures are higher than those of the base e uids. Using theoretical models of effective thermal conductivity of a mixture, we have demonstrated that the predicted thermal conductivities of nanoparticle ‐e uid mixtures are much lower than our measured data, indicating the dee ciency in the existing models when used for nanoparticle ‐e uid mixtures. Possible mechanisms contributing to enhancement of the thermal conductivity of the mixtures are discussed. A more comprehensive theory is needed to fully explain the behavior of nanoparticle ‐e uid mixtures. Nomenclature cp = specie c heat k = thermal conductivity L = thickness Pe = Peclet number P q = input power to heater 1 r = radius of particle S = cross-sectional area T = temperature U = velocity of particles relative to that of base e uids ® = ratio of thermal conductivity of particle to that of base liquid ¯ = .® i 1/=.® i 2/ ° = shear rate of e ow Ω = density A = volume fraction of particles in e uids Subscripts

Heat transfer characteristics of nanofluids: a review

Abstract: Research in convective heat transfer using suspensions of nanometer-sized solid particles in base liquids started only over the past decade Recent investigations on nanofluids, as such suspensions are often called, indicate that the suspended nanoparticles markedly change the transport properties and heat transfer characteristics of the suspension This review summarizes recent research on fluid flow and heat transfer characteristics of nanofluids in forced and free convection flows and identifies opportunities for future research