scispace - formally typeset
Search or ask a question
Author

Ying Diao

Bio: Ying Diao is an academic researcher from University of Illinois at Urbana–Champaign. The author has contributed to research in topics: Organic semiconductor & Organic electronics. The author has an hindex of 42, co-authored 93 publications receiving 6585 citations. Previous affiliations of Ying Diao include Massachusetts Institute of Technology & SLAC National Accelerator Laboratory.

Papers published on a yearly basis

Papers
More filters
Journal ArticleDOI
Jianguo Mei1, Ying Diao1, Anthony L. Appleton1, Lei Fang1, Zhenan Bao1 
TL;DR: Some of the major milestones along the way are highlighted to provide a historical view of OFET development, introduce the integrated molecular design concepts and process engineering approaches that lead to the current success, and identify the challenges ahead to make OFETs applicable in real applications.
Abstract: The past couple of years have witnessed a remarkable burst in the development of organic field-effect transistors (OFETs), with a number of organic semiconductors surpassing the benchmark mobility of 10 cm2/(V s). In this perspective, we highlight some of the major milestones along the way to provide a historical view of OFET development, introduce the integrated molecular design concepts and process engineering approaches that lead to the current success, and identify the challenges ahead to make OFETs applicable in real applications.

1,216 citations

Journal ArticleDOI
TL;DR: An approach--termed fluid-enhanced crystal engineering (FLUENCE)--that allows for a high degree of morphological control of solution-printed thin films and may find use in the fabrication of high-performance, large-area printed electronics.
Abstract: Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach—termed fluid-enhanced crystal engineering (FLUENCE)—that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm2 V−1 s−1 and 11 cm2 V−1 s−1. FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics. Solution printing of organic semiconductors could in principle be scaled to industrial needs, yet attaining aligned single-crystals directly with this method has been challenging. By using a micropillar-patterned printing blade designed to enhance the control of crystal nucleation and growth, thin films of macroscopic, highly aligned single crystals of organic semiconductors can now be fabricated.

876 citations

Journal ArticleDOI
TL;DR: In this article, a survey of solution-based processing techniques for plastic electronics relevant on both the commercial and research scale and a set of strategies to control thin film morphology towards enhancing their electronic transport properties.
Abstract: While the chemical structure of organic semiconductors has an obvious effect on their proclivity for charge transport, the ways with which they are processed have a dramatic effect on the performance of plastic electronics devices incorporating them. In some cases, morphological defects and misalignment of crystalline grains can completely obscure the materials' intrinsic charge transport properties. Although some deposition methods, especially vapor-phase ones, can produce single crystals and thus avoid some of these problems, it is desirable to gain a fundamental understanding of how to improve charge transport when using solution-phase deposition techniques. In this review, we present both a survey of solution-based processing techniques for plastic electronics relevant on both the commercial and research scale and a set of strategies to control thin film morphology towards enhancing their electronic transport properties.

500 citations

Journal ArticleDOI
TL;DR: In this paper, mixed materials of the metal-organic framework (MOF), chromium(III) terephthalate (MIL-101), and phosphotungstic acid (PTA) were synthesized in aqueous media in the absence of hydrofluoric acid XRD analysis indicates the presence of ordered PTA assemblies residing in both the large cages and small pores of MIL-101, which suggests the formation of previously undocumented structures.
Abstract: Hybrid materials of the metal–organic framework (MOF), chromium(III) terephthalate (MIL-101), and phosphotungstic acid (PTA) were synthesized in aqueous media in the absence of hydrofluoric acid XRD analysis of the MIL101/PTA composites indicates the presence of ordered PTA assemblies residing in both the large cages and small pores of MIL-101, which suggests the formation of previously undocumented structures The MIL101/PTA structure enables a PTA payload 15–2 times higher than previously achieved The catalytic performance of the MIL101/PTA composites was assessed in the Baeyer condensation of benzaldehyde and 2-naphthol, in the three-component condensation of benzaldehyde, 2-naphthol, and acetamide, and in the epoxidation of caryophyllene by hydrogen peroxide The catalytic efficiency was demonstrated by the high (over 80–90%) conversion of the reactants under microwave-assisted heating In four consecutive reaction cycles, the catalyst recovery was in excess of 75%, whereas the product yields were

358 citations

Journal ArticleDOI
TL;DR: Acknowledge support from the Office of Naval Research (N00014-14-1-0142), KAUST Center for Advanced Molecular Photovoltaics at Stanford and the Stanford Global Climate and Energy Program, NSF DMR-1303742 and the National Natural Science Foundation of China.
Abstract: Acknowledge support from the Office of Naval Research (N00014-14-1-0142), KAUST Center for Advanced Molecular Photovoltaics at Stanford and the Stanford Global Climate and Energy Program, NSF DMR-1303742 and the National Natural Science Foundation of China (Projects 21174004 and 21222403). Soft X-ray characterization and analysis by NCSU supported by the U.S. Department of Energy, Office of Science, Basic Energy Science, Division of Materials Science and Engineering under Contract DE-FG02-98ER45737. Soft X-ray data was acquired at beamlines 11.0.1.2 at the Advanced Light Source, which is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U. S. Department of Energy under Contract No. DE-AC02-05CH11231. We thank Professor Michael D. McGehee, Dr. George F. Burkhard and Dr. Eric T. Hoke for their help in discussion of the recombination mechanism.

328 citations


Cited by
More filters
01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

Journal ArticleDOI
17 Apr 2019-Joule
TL;DR: In this paper, a ladder-type electron-deficient core-based central fused ring (Dithienothiophen[3.2-b]- pyrrolobenzothiadiazole) with a benzothiadiadiazoles (BT) core was proposed to fine-tune its absorption and electron affinity.

3,513 citations

Journal ArticleDOI
TL;DR: A novel non-fullerene electron acceptor (ITIC) that overcomes some of the shortcomings of fullerene acceptors, for example, weak absorption in the visible spectral region and limited energy-level variability, is designed and synthesized.
Abstract: A novel non-fullerene electron acceptor (ITIC) that overcomes some of the shortcomings of fullerene acceptors, for example, weak absorption in the visible spectral region and limited energy-level variability, is designed and synthesized. Fullerene-free polymer solar cells (PSCs) based on the ITIC acceptor are demonstrated to exhibit power conversion effi ciencies of up to 6.8%, a record for fullerene-free PSCs.

3,048 citations

Proceedings Article
01 Jan 1999
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

2,722 citations