Yitong Dong

Bio: Yitong Dong is an academic researcher from University of Toronto. The author has contributed to research in topics: Perovskite (structure) & Quantum dot. The author has an hindex of 13, co-authored 18 publications receiving 1179 citations.

Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon.

Abstract: Stacking solar cells with decreasing band gaps to form tandems presents the possibility of overcoming the single-junction Shockley-Queisser limit in photovoltaics. The rapid development of solution-processed perovskites has brought perovskite single-junction efficiencies >20%. However, this process has yet to enable monolithic integration with industry-relevant textured crystalline silicon solar cells. We report tandems that combine solution-processed micrometer-thick perovskite top cells with fully textured silicon heterojunction bottom cells. To overcome the charge-collection challenges in micrometer-thick perovskites, we enhanced threefold the depletion width at the bases of silicon pyramids. Moreover, by anchoring a self-limiting passivant (1-butanethiol) on the perovskite surfaces, we enhanced the diffusion length and further suppressed phase segregation. These combined enhancements enabled an independently certified power conversion efficiency of 25.7% for perovskite-silicon tandem solar cells. These devices exhibited negligible performance loss after a 400-hour thermal stability test at 85°C and also after 400 hours under maximum power point tracking at 40°C.

Bipolar-shell resurfacing for blue LEDs based on strongly confined perovskite quantum dots

Abstract: Colloidal quantum dot (QD) solids are emerging semiconductors that have been actively explored in fundamental studies of charge transport1 and for applications in optoelectronics2. Forming high-quality QD solids—necessary for device fabrication—requires substitution of the long organic ligands used for synthesis with short ligands that provide increased QD coupling and improved charge transport3. However, in perovskite QDs, the polar solvents used to carry out the ligand exchange decompose the highly ionic perovskites4. Here we report perovskite QD resurfacing to achieve a bipolar shell consisting of an inner anion shell, and an outer shell comprised of cations and polar solvent molecules. The outer shell is electrostatically adsorbed to the negatively charged inner shell. This approach produces strongly confined perovskite QD solids that feature improved carrier mobility (≥0.01 cm2 V−1 s−1) and reduced trap density relative to previously reported low-dimensional perovskites. Blue-emitting QD films exhibit photoluminescence quantum yields exceeding 90%. By exploiting the improved mobility, we have been able to fabricate CsPbBr3 QD-based efficient blue and green light-emitting diodes. Blue devices with reduced trap density have an external quantum efficiency of 12.3%; the green devices achieve an external quantum efficiency of 22%. A solution-based ligand-exchange strategy enables the realization of close-packed quantum dot solid films with near-unity photoluminescence quantum yield and high charge carrier mobility.

Thermal unequilibrium of strained black CsPbI3 thin films

Abstract: The high-temperature, all-inorganic CsPbI3 perovskite black phase is metastable relative to its yellow, nonperovskite phase at room temperature. Because only the black phase is optically active, this represents an impediment for the use of CsPbI3 in optoelectronic devices. We report the use of substrate clamping and biaxial strain to render black-phase CsPbI3 thin films stable at room temperature. We used synchrotron-based, grazing incidence, wide-angle x-ray scattering to track the introduction of crystal distortions and strain-driven texture formation within black CsPbI3 thin films when they were cooled after annealing at 330°C. The thermal stability of black CsPbI3 thin films is vastly improved by the strained interface, a response verified by ab initio thermodynamic modeling.

Regulating strain in perovskite thin films through charge-transport layers

Abstract: Thermally-induced tensile strain that remains in perovskite films following annealing results in increased ion migration and is a known factor in the instability of these materials. Previously-reported strain regulation methods for perovskite solar cells (PSCs) have utilized substrates with high thermal expansion coefficients that limits the processing temperature of perovskites and compromises power conversion efficiency. Here we compensate residual tensile strain by introducing an external compressive strain from the hole-transport layer. By using a hole-transport layer with high thermal expansion coefficient, we compensate the tensile strain in PSCs by elevating the processing temperature of hole-transport layer. We find that compressive strain increases the activation energy for ion migration, improving the stability of perovskite films. We achieve an efficiency of 16.4% for compressively-strained PSCs; and these retain 96% of their initial efficiencies after heating at 85 °C for 1000 hours—the most stable wide-bandgap perovskites (above 1.75 eV) reported so far. Remnant tensile strain in the perovskite films induced in the thermal annealing step is a known source of material and device instabilities. Here Xue et al. use a thermal expandable hole transporting layer to compensate the strain and result in most stable wide-bandgap perovskite solar cells so far.

Bright high-colour-purity deep-blue carbon dot light-emitting diodes via efficient edge amination

Abstract: Deep-blue light-emitting diodes (LEDs) (emitting at wavelengths of less than 450 nm) are important for solid-state lighting, vivid displays and high-density information storage. Colloidal quantum dots, typically based on heavy metals such as cadmium and lead, are promising candidates for deep-blue LEDs, but these have so far had external quantum efficiencies lower than 1.7%. Here we present deep-blue light-emitting materials and devices based on carbon dots. The carbon dots produce emission with a narrow full-width at half-maximum (about 35 nm) with high photoluminescence quantum yield (70% ± 10%) and a colour coordinate (0.15, 0.05) closely approaching the standard colour Rec. 2020 (0.131, 0.046) specification. Structural and optical characterization, together with computational studies, reveal that amine-based passivation accounts for the efficient and high-colour-purity emission. Deep-blue LEDs based on these carbon dots display high performance with a maximum luminance of 5,240 cd m−2 and an external quantum efficiency of 4%, notably exceeding that of previously reported quantum-tuned solution-processed deep-blue LEDs. Deep-blue high-colour-purity light-emitting materials are developed by using amine-based edge passivation. The light-emitting diodes based on the carbon dots exhibit a maximum luminance of 5,240 cd m–2 and an external quantum efficiency of 4%.

High-Efficiency Perovskite Solar Cells.

Abstract: With rapid progress in a power conversion efficiency (PCE) to reach 25%, metal halide perovskite-based solar cells became a game-changer in a photovoltaic performance race. Triggered by the development of the solid-state perovskite solar cell in 2012, intense follow-up research works on structure design, materials chemistry, process engineering, and device physics have contributed to the revolutionary evolution of the solid-state perovskite solar cell to be a strong candidate for a next-generation solar energy harvester. The high efficiency in combination with the low cost of materials and processes are the selling points of this cell over commercial silicon or other organic and inorganic solar cells. The characteristic features of perovskite materials may enable further advancement of the PCE beyond those afforded by the silicon solar cells, toward the Shockley-Queisser limit. This review summarizes the fundamentals behind the optoelectronic properties of perovskite materials, as well as the important approaches to fabricating high-efficiency perovskite solar cells. Furthermore, possible next-generation strategies for enhancing the PCE over the Shockley-Queisser limit are discussed.

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Abstract: Tandem solar cells that pair silicon with a metal halide perovskite are a promising option for surpassing the single-cell efficiency limit. We report a monolithic perovskite/silicon tandem with a certified power conversion efficiency of 29.15%. The perovskite absorber, with a bandgap of 1.68 electron volts, remained phase-stable under illumination through a combination of fast hole extraction and minimized nonradiative recombination at the hole-selective interface. These features were made possible by a self-assembled, methyl-substituted carbazole monolayer as the hole-selective layer in the perovskite cell. The accelerated hole extraction was linked to a low ideality factor of 1.26 and single-junction fill factors of up to 84%, while enabling a tandem open-circuit voltage of as high as 1.92 volts. In air, without encapsulation, a tandem retained 95% of its initial efficiency after 300 hours of operation.

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

Abstract: High-efficiency lead halide perovskite solar cells (PSCs) have been fabricated with α-phase formamidinium lead iodide (FAPbI3) stabilized with multiple cations. The alloyed cations greatly affect the bandgap, carrier dynamics, and stability, as well as lattice strain that creates unwanted carrier trap sites. We substituted cesium (Cs) and methylenediammonium (MDA) cations in FA sites of FAPbI3 and found that 0.03 mol fraction of both MDA and Cs cations lowered lattice strain, which increased carrier lifetime and reduced Urbach energy and defect concentration. The best-performing PSC exhibited power conversion efficiency >25% under 100 milliwatt per square centimeter AM 1.5G illumination (24.4% certified efficiency). Unencapsulated devices maintained >80% of their initial efficiency after 1300 hours in the dark at 85°C.

Conformal quantum dot–SnO2 layers as electron transporters for efficient perovskite solar cells

Abstract: Improvements to perovskite solar cells (PSCs) have focused on increasing their power conversion efficiency (PCE) and operational stability and maintaining high performance upon scale-up to module sizes. We report that replacing the commonly used mesoporous–titanium dioxide electron transport layer (ETL) with a thin layer of polyacrylic acid–stabilized tin(IV) oxide quantum dots (paa-QD-SnO2) on the compact–titanium dioxide enhanced light capture and largely suppressed nonradiative recombination at the ETL–perovskite interface. The use of paa-QD-SnO2 as electron-selective contact enabled PSCs (0.08 square centimeters) with a PCE of 25.7% (certified 25.4%) and high operational stability and facilitated the scale-up of the PSCs to larger areas. PCEs of 23.3, 21.7, and 20.6% were achieved for PSCs with active areas of 1, 20, and 64 square centimeters, respectively. Description Tailoring tin oxide layers Mesoporous titanium dioxide is commonly used as the electron transport layer in perovskite solar cells, but electron transport layers based on tin(IV) oxide quantum dots could be more efficient, with a better-aligned conduction band and a higher carrier mobility. Kim et al. show that such quantum dots could conformally coat a textured fluorine-doped tin oxide electrode when stabilized with polyacrylic acid. Improved light trapping and reduced nonradiative recombination resulted in a certified power conversion efficiency of 25.4% and high operational stability. In larger-area minimodules, active areas as high as 64 square centimeters maintained certified power conversion efficiencies of more than 20%. —PDS Polymer-stabilized tin oxide nanoparticles suppress recombination at the electron-transport layer–perovskite interface.

Carbon Dots: A New Type of Carbon-Based Nanomaterial with Wide Applications

Abstract: Carbon dots (CDs), as a new type of carbon-based nanomaterial, have attracted broad research interest for years, because of their diverse physicochemical properties and favorable attributes like good biocompatibility, unique optical properties, low cost, ecofriendliness, abundant functional groups (e.g., amino, hydroxyl, carboxyl), high stability, and electron mobility. In this Outlook, we comprehensively summarize the classification of CDs based on the analysis of their formation mechanism, micro-/nanostructure and property features, and describe their synthetic methods and optical properties including strong absorption, photoluminescence, and phosphorescence. Furthermore, the recent significant advances in diverse applications, including optical (sensor, anticounterfeiting), energy (light-emitting diodes, catalysis, photovoltaics, supercapacitors), and promising biomedicine, are systematically highlighted. Finally, we envisage the key issues to be challenged, future research directions, and perspectives to show a full picture of CDs-based materials.