Yixin Cao

Bio: Yixin Cao is an academic researcher. The author has contributed to research in topics: Composite number & Naked eye. The author has an hindex of 2, co-authored 3 publications receiving 4 citations.

Green synthesis of orange emissive carbon dots for the detection of Ag+and their application via solid-phase sensing and security ink.

Abstract: Fluorescent carbon dots (CDs) have attracted considerable interest due to their superior optical properties and facile preparation. In this work, O-phenylenediamine and melamine were used as precursors for the one-step hydrothermal synthesis of novel orange emissive CDs (O-CDs) in an aqueous solution. The fluorescence intensity (580 nm) of the O-CDs exhibited a good linear relationship with Ag+in the range of 0.0-50.0μM with the detection limit of 0.289μM. Moreover, the O-CDs were successfully used to determine Ag+in biological samples (Hela cells) because of their low cytotoxicity, and good biocompatibility. Besides, the O-CDs-doped solid-phase detection materials (test paper and hydrogel) were employed to monitor Ag+qualitatively and quantitatively, indicated that the O-CDs had a great capacity for the detection of Ag+in biological and environmental areas. Based on their extraordinary fluorescence property, the O-CDs could also be used as security ink. Overall, based on their excellent fluorescent performance, the CDs in this study have significant potential for practical application toward solid-phase sensing and security ink.

Cogel Strategy for the Preparation of a "Thorn"-Like Porous Halloysite/Gelatin Composite Aerogel with Excellent Mechanical Properties and Thermal Insulation.

Abstract: This work presents the preparation and property characterization of a biomass gelatin (GA)-based aerogel. Halloysite nanotubes (HNTs) were used to improve the mechanical strength, pore size distribution, and thermal stability of the aerogel. Polyethyleneimine (PEI) and (3-glycidyloxypropyl)trimethoxysilane (GPTMS) were utilized to increase the interfacial interaction between HNTs and GA through chemical cross-linking. Green, sustainable, and low-cost composite aerogels were prepared by "cogel" and freeze-drying techniques. The experimental results show that the HNTs/GA composite aerogel has a low density (31.98-57.48 mg/cm3), a high porosity (>95%), a low thermal conductivity (31.85-40.16 mW m-1 K-1), and superior moldability. In addition, the mechanical strength and thermal insulation properties of the HNTs/GA composite aerogels with a "thorn"-like lamellar porous network structure are different in the axial direction versus the radial direction. The maximum compressive strength, maximum compressive modulus, and corresponding specific modulus in the axial direction were 1.81 MPa, 5.45 MPa, and 94.8 kN m kg-1, respectively. Therefore, the biomass/clay composite aerogel will be a sustainable and renewable functional material with high mechanical strength and thermal insulation properties, which is expected to further promote biomass and clay for high value utilization.

A mitochondria-targeting fluorescent sensor for on-off-on response to Cu2+ and ATP in cells and zebrafish.

Abstract: Cupric ion (Cu2+) and adenosine triphosphate (ATP) are functionally important in mitochondria and play essential roles in many important biological processes. In this work, a mitochondria-targeting fluorescent molecule Mito-A was used as a probe to detect Cu2+ and ATP. The results showed remarkable fluorescence quenching of Mito-A in the presence of Cu2+, and then the quenched fluorescence solution gradually recovered due to the ATP binding to Cu2+ from the structure of the molecule. Mito-A has high sensitivity to Cu2+ and ATP, with limits of detection (LOD) close to 40 nM and 0.43 μM, respectively. Cell imaging experiments showed that Mito-A has good mitochondria-targeting capabilities, and can be successfully employed for imaging Cu2+ and ATP in living cells and zebrafish.

Electrospun Nanofibers as Chemosensors for Detecting Environmental Pollutants: A Review

Abstract: Electrospun nanofibers have shown their advantages for applications in a wide variety of scientific fields thanks to their unique properties. Meanwhile, electrospinning is closely following the fast development of nano science and nanotechnology to move forward to smaller (pico-technology), more complicated nanostructures/nanodevices and more order (all kinds of nano arrays). Particularly, multiple-fluid electrospinning has the strong capability of creating nanostructures from a structural spinneret in a single-step and a straightforward “top-down” manner, holding great promise for creation on a large scale. This review is just to conclude the state-of-art studies on the related topics and also point out that the future directions of environmental detection require chemosensors, while the improvement of sensors requires new chemically synthesized functional substances, new nanostructured materials, application convenience, and functional integration or synergy. Based on the developments of electrospinning, more and more possibilities can be drawn out for detecting environmental pollutants with electrospun nanostructures as the strong support platform.