Yohannes Abebe

Bio: Yohannes Abebe is an academic researcher from University of Gondar. The author has contributed to research in topics: Adsorption & Activated carbon. The author has an hindex of 1, co-authored 1 publications receiving 9 citations.

Response surface methodology as a statistical tool for optimization of removal of chromium (VI) from aqueous solution by Teff ( Eragrostis teff ) husk activated carbon

Abstract: Recently, rapid industrialization leads to excessive release of heavy metals such as Cr(VI) in the environment. Exposure to chromium (VI) can cause kidney and liver damage, depressed immune systems, and a variety of cancers. Therefore, treatment of Cr(VI) containing wastewater is mandatory. This study aims to optimize the removal of Cr(VI) from aqueous solution using locally available Teff husk activated carbon adsorbent. The laboratory-based study was conducted on the optimization of Cr(VI) removal efficiency of Teff husk activated carbon from aqueous solution. A central composite design was used to examine the effect of the interaction of process parameters and to optimize the process using Design Expert version 7.0 software. The optimized removal efficiency of Teff husk activated carbon (95.597%) was achieved at 1.92 pH, 87.83 mg/L initial concentration, 20.22 g/L adsorbent dose, and 2.07 H contact time. The adsorption of Cr(VI) on Teff husk activated carbon was found to be best fitted with pseudo-second-order kinetics and Langmuir isotherm model of the adsorption. Teff husk activated carbon can be used as an efficient adsorbent for removal of chromium (VI) from contaminated water. Column adsorption needs to be studied in the future.

An extensive review on chromium (vi) removal using natural and agricultural wastes materials as alternative biosorbents.

Abstract: Several conventional techniques for heavy metals decontamination for instance ion exchange, evaporation, precipitation and electroplating have been utilized in preceding years. Though these techniques have some drawbacks, adsorption using low-cost biosorbents is environmentally friendly. In this study, the potential of several natural and agricultural wastes as economical biosorbents for the reduction of Cr(VI) ions from polluted water has been reviewed. The application of adsorption models, as well as the impact of adsorption factors on heavy metals eradication, has been considered in this review. The study revealed that efficient reduction of Cr(VI) from water and wastewaters is highly dependent on the pH of the solution, shaking time, adsorbent type, initial concentration and temperature. The review of the relevant literature indicates that the maximum removal efficiency of Cr(VI) using the various low-cost adsorbents ranged from 50.0–100.0% with optimum pH and contact time ranging from 2.0–6.0 and 30.0–180.0 min, respectively at room temperature (25.0 °C). Furthermore, considering all the studies reviewed, the pseudo-second-kinetics and Langmuir isotherm are the dominant models that best described the Cr(VI) equilibrium data. The thermodynamic parameters suggested that the biosorption of Cr(VI) on the biosorbents was spontaneous, realistic and endothermic at the temperature range of 30.0–45.0 °C. It is found that the natural and agricultural wastes as cheap biosorbents are feasible replacements to commercial activated carbons for metal-contaminated water treatment. However, gaps have been identified to improve applicability, regeneration, reuse and safe discarding of the laden adsorbents, optimization and commercialization of suitable agricultural adsorbents.

Removal of Cr(VI) from Aqueous Solutions Using Biowastes: Tella Residue and Pea (Pisum sativum) Seed Shell

Abstract: The wide use of chromium (Cr) in different industries led to the release of a considerable amount of Cr(VI) into water bodies. Exposure to Cr(VI) can cause diseases in humans and animals. Therefore, low-cost technology for Cr(VI) removal is required. In this study, the biowastes, “Tella” residue (TR) and Pea (Pisum sativum) seed shell (PSS), were evaluated for their Cr(VI) removal efficiency from aqueous solutions. The physicochemical properties of adsorbents were studied, and the adsorbents were further characterized using FTIR and XRD. Batch adsorption experiments have shown that the Cr(VI) uptake was pH-dependent and found to be effective in a wide range of pH values (pH 1 to 10) for PSS. The kinetics of Cr(VI) removal by the adsorbents was well expressed by the pseudo-second-order model. The experimental equilibrium adsorption data fitted well with Freundlich isotherm indicating multilayers adsorption. The estimated Cr(VI) adsorption capacities of TR and PSS were 15.6 mg/g and 8.5 mg/g, respectively. On top of this, the possibility of reusing adsorbents indicates the potential applicability of TR and PSS for the treatment of Cr(VI) contaminated water. Further study on the evaluation of the efficiency of the adsorbents using real chromium-contaminated wastewater is recommended.