Yong Han

Bio: Yong Han is an academic researcher from Seoul National University. The author has contributed to research in topics: Nanocrystalline material & Simulated body fluid. The author has an hindex of 3, co-authored 3 publications receiving 599 citations. Previous affiliations of Yong Han include Xi'an Jiaotong University.

Porous nanocrystalline titania films by plasma electrolytic oxidation

Abstract: Nanocrystalline titania films were prepared by plasma electrolytic oxidation of a titanium alloy at 200–350 V in a Na2CO3 electrolytic solution using a pulsed power supply. XRD, EDS and Field Emission (FE) SEM were employed to characterize the phase, composition, and microstructure of the films. Vickers indentation, nanoindentation and adhesion–tension test were used to evaluate the mechanical properties of the films. The phase, pore size and thickness of the films strongly depend on the applied voltage consistent with the previous reports. The films prepared at 350 V were porous with ∼1 μm pores and the pore walls were composed of 10–20 nm rutile crystallites. The hardness, Young's modulus and bond strength of the film were 0.9±0.2 GPa, 32±4 GPa and 37±3 MPa, respectively. The film exhibited a significant plasticity and ductility compared to the conventional coarse-grained titania ceramics.

TiO2 nanotubes: Self-organized electrochemical formation, properties and applications

Abstract: The present paper gives an overview and review on self-organized TiO2 nanotube layers and other transition metal oxide tubular structures grown by controlled anodic oxidation of a metal substrate We describe mechanistic aspects of the tube growth and discuss the electrochemical conditions that need to be fulfilled in order to synthesize these layers Key properties of these highly ordered, high aspect ratio tubular layers are discussed In the past few years, a wide range of functional applications of the layers have been explored ranging from photocatalysis, solar energy conversion, electrochromic effects over using the material as a template or catalyst support to applications in the biomedical field A comprehensive view on state of the art is provided

Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies

Abstract: With an ageing population, war, and sports related injuries there is an ever-expanding requirement for hard tissue replacement such as bone. Engineered artificial scaffold biomaterials with appropriate mechanical properties, surface chemistry and surface topography are in a great demand for enhancing cell attachment, cell growth and tissue formation at such defect sites. Most of these engineering techniques are aimed at mimicking the natural organization of the bone tissues and thereby create a conducive environment for bone regeneration. As the interaction between the cells and tissues with biomaterials at the tissue–implant interface is a surface phenomenon, surface properties play a major role in determining both the biological response to implants and the material response to the physiological condition. Hence surface engineering of biomaterials is aimed at modifying the material and biological responses through changes in surface properties while still maintaining the bulk mechanical properties of the implant. Therefore, there has been a great thrust towards development of Ca–P-based surface coatings on various metallic and nonmetallic substrates for load bearing implant applications such as hip joint prosthesis, knee joint prosthesis and dental implants. Typical coating methodologies like ion beam assisted deposition, plasma spray deposition, pulsed laser physical vapor deposition, magnetron sputtering, sol–gel derived coatings, electrodeposition, micro-arc oxidation and laser deposition are extensively studied at laboratory scale. In the present article, attempts are made to give an overview of the basic principles behind the coating techniques as well as advantageous features such as bioactivity and biocompatibility associated with these coatings. A strong emphasis will be given on laser-induced textured and bioactive coatings obtained by the author's research group [A. Kurella, N.B. Dahotre, Journal of Biomedical Applications 20 (2005) 5–50; A. Kurella, N.B. Dahotre, Acta Biomaterialia 2 (2006) 677–688; A. Kurella, N.B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM) 58 (2006) 64–66; A. Kurella, N.B. Dahotre, Journal of Materials Science: Materials in Medicine 17 (2006) 565–572; P.G. Engleman, A. Kurella, A. Samant, C.A. Blue, N.B. Dahotre, Journal of Minerals, Metals and Materials Society (JOM) 57 (2005) 46–50; R. Singh, A. Kurella, N.B. Dahotre, Journal of Biomaterials Applications 21 (2006) 46–72; S.R. Paital, N.B. Dahotre, Biomedical Materials 2 (2007) 274–281; S.R. Paital, N.B. Dahotre, 2009, Acta Biomaterialia, doi:10.1016/j.actbio.2009.03.004 ; R. Singh, N.B. Dahotre, Journal of Materials Science: Materials in Medicine 18 (2007) 725–751.]. Since cells are sensitive to topographical features ranging from mesoscale to nanoscale, formation of these features by both pulsed and continuous wave Nd:YAG laser system will be highlighted. This can also be regarded as advancement towards third generation biomaterials which are bioinert, bioactive and which once implanted will stimulate cell adhesion, proliferation and growth at the interface. Further, an overview of various bio-implants and bio-devices and materials used for these kinds of devices, performance factors such as mechanical and corrosion behavior and surface science associated with these materials are also explained. As the present article is aimed at describing the multidisciplinary nature of this exciting field it also provides a common platform to understand this subject in a simple way for students, researchers, teachers and engineers in the fields ranging from medicine, dentistry, biology, materials science, biomedicine, biomechanics to physics.

Calcium phosphate-based coatings on titanium and its alloys

Abstract: Use of titanium as biomaterial is possible because of its very favorable biocompatibility with living tissue. Titanium implants having calcium phosphate coatings on their surface show good fixation to the bone. This review covers briefly the requirements of typical biomaterials and narrowly focuses on the works on titanium. Calcium phosphate ceramics for use in implants are introduced and various methods of producing calcium phosphate coating on titanium substrates are elaborated. Advantages and disadvantages of each type of coating from the view point of process simplicity, cost-effectiveness, stability of the coatings, coating integration with the bone, cell behavior, and so forth are highlighted. Taking into account all these factors, the efficient method(s) of producing these coatings are indicated finally.