Antenna Theory And Design

Before the emergence of ultra-wideband (UWB) radios, widely used wireless communications were based on sinusoidal carriers, and impulse technologies were employed only in specific applications (e.g. radar). In 2002, the Federal Communication Commission (FCC) allowed unlicensed operation between 3.1–10.6 GHz for UWB communication, using a wideband signal format with a low EIRP level (−41.3dBm/MHz). UWB communication systems then emerged as an alternative to narrowband systems and significant effort in this area has been invested at the regulatory, commercial, and research levels.

IEEE Transactions on Microwave Theory and Techniques and Antennas and Propagation Announce a Joint Special Issue on Ultra-Wideband (UWB) Technology

For the first time to the best of our knowledge, this paper provides an overview of millimeter-wave (mmWave) 5G antennas for cellular handsets. Practical design considerations and solutions related to the integration of mmWave phased-array antennas with beam switching capabilities are investigated in detail. To experimentally examine the proposed methodologies, two types of mesh-grid phased-array antennas featuring reconfigurable horizontal and vertical polarizations are designed, fabricated, and measured at the 60 GHz spectrum. Afterward the antennas are integrated with the rest of the 60 GHz RF and digital architecture to create integrated mmWave antenna modules and implemented within fully operating cellular handsets under plausible user scenarios. The effectiveness, current limitations, and required future research areas regarding the presented mmWave 5G antenna design technologies are studied using mmWave 5G system benchmarks.

Millimeter-Wave 5G Antennas for Smartphones: Overview and Experimental Demonstration

Aspects of the subject disclosure may include, for example, receiving, by a feed point of a dielectric antenna, electromagnetic waves from a dielectric core coupled to the feed point without an electrical return path, where at least a portion of the dielectric antenna comprises a conductive surface, directing, by the feed point, the electromagnetic waves to a proximal portion of the dielectric antenna, and radiating, via an aperture of the dielectric antenna, a wireless signal responsive to the electromagnetic waves being received at the aperture. Other embodiments are disclosed.

Method and apparatus for coupling an antenna to a device

A hybrid antenna is proposed for future 4G/5G multiple input multiple output (MIMO) applications. The proposed antenna is composed of two antenna modules, namely, 4G antenna module and 5G antenna module. The 4G antenna module is a two-antenna array capable of covering the GSM850/900/1800/1900, UMTS2100, and LTE2300/2500 operating bands, while the 5G antenna module is an eight-antenna array operating in the 3.5-GHz band capable of covering the $C$ -band (3400–3600 MHz), which could meet the demand of future 5G application. Compared with ideal uncorrelated antennas in an $8 \times 8$ MIMO system, the 5G antenna module has shown good ergodic channel capacity of $\sim 40$ b/s/Hz, which is only 6 b/s/Hz lower than ideal case. This multi-mode hybrid antenna is fabricated, and typically, experimental results such as S-parameter, antenna efficiency, radiation pattern, and envelope correlation coefficient are presented.

4G/5G Multiple Antennas for Future Multi-Mode Smartphone Applications

A dual-polarized hybrid eight-antenna array operating in the 2.6-GHz band (2550–2650 MHz) for 5G communication multi-input multi-output (MIMO) operation in the smartphone is presented. The proposed hybrid antenna array elements are symmetrically placed along the long edges of the smartphone, and they are composed of two different four-antenna array types (C-shaped coupled-fed and L-shaped monopole slot) that exhibit orthogonal polarization. Therefore, coupling between the two antenna array types can be reduced, and the MIMO system performances are enhanced. A prototype of the proposed eight-antenna array is manufactured and measured. A good impedance matching (10 dB return loss or better), desirable cross-polarization discrimination (better than 15 dB), and an acceptable isolation (better than 12.5 dB) are obtained. Envelope correlation coefficient and channel capacity are also calculated to evaluate the MIMO performances of the proposed antenna array.

Eight-Port Orthogonally Dual-Polarized Antenna Array for 5G Smartphone Applications

Using the quad-antenna linear (QAL) array as a building block, the 8-antenna and 16-antenna arrays for the 3.5-GHz long term evolution multiple-input multiple-output (MIMO) operation in the smartphone are demonstrated. The QAL array has a planar structure of narrow width 3 mm (0.035λ) and short length 50 mm (0.58λ), with λ being the wavelength at 3.5 GHz. For the 8-antenna array, two QAL arrays are disposed along two opposite side edges (denoted as Array A) or the same side edge (denoted as Array B) of the system circuit board of the smartphone. The obtained envelope correlation coefficient values of the antennas in Array A and B are shown. The calculated channel capacities for Array A and B applied in an 8 × 8 MIMO system are also analyzed. The 16-antenna array formed by four QAL arrays disposed along two opposite side edges (denoted as Array C) is then studied. For operating in a 16 × 16 MIMO system, the calculated channel capacity of Array C can reach about 66–70 bps/Hz with a 20-dB signal-to-noise ratio. The obtained channel capacity is about 5.7–6.1 times that (11.5 bps/Hz) of the upper limit of an ideal 2 × 2 MIMO system with 100% antenna efficiency for the antennas therein. Details of the proposed Array A, B, and C are described, and the obtained results are presented. © 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:174–181, 2016

8-antenna and 16-antenna arrays using the quad-antenna linear array as a building block for the 3.5-GHz LTE MIMO operation in the smartphone

A tri-polarized 12-antenna array working in the 3.5-GHz band (3.4–3.6 GHz) for future 5G (the fifth generation mobile communication) multiple-input multiple-output (MIMO) operations in the smartphone is presented. In order to reduce the mutual couplings and simplify the design process, orthogonal polarization technique is utilized. By combining a quarter mode substrate integrated wave-guide antenna and two open-end slots, a compact 3-antenna tri-polarization block operating in the 3.5-GHz band is achieved within a small volume of $17\times 17\times6$ mm3. Thanks to the orthogonal polarization features, the three antennas within the block are able to have good impedance matchings and low mutual couplings between antennas. By integrating four such tri-polarization blocks, a 12-antenna MIMO array is then designed for smartphone applications. It is also due to the tri-polarization feature, the proposed array could attain acceptable isolations and low correlations between antennas with only two additional decoupling structures. The proposed array is fabricated and tested, good antenna performances, such as return loss better than 10 dB, isolation higher than 12.5 dB, and antenna efficiencies higher than 50%, are obtained. The channel capacity of the 12-antenna array is calculated to be about 57 bps/Hz in a $12\times12$ MIMO system with 20-dB signal-to-noise ratio, which indicates the proposed array using tri-polarization technique is a good choice for future 5G terminals.

Tri-Polarized 12-Antenna MIMO Array for Future 5G Smartphone Applications

A wireless terminal antenna is disclosed. The antenna includes a pull rod, a pull rod pedestal located at the base of the pull rod, and a spiral coil. One end of the spiral coil is electrically connected with the pull rod pedestal. The pull rod is axially retractable along the pull rod pedestal until it is retracted into the space enclosed by the spiral coil. At idle time, the pull rod is nested inside the spiral coil so that it is short and portable. When receiving signals normally, the pull rod can be pulled out. The antenna is miniaturized, portable, and provides good performance.

Yong-Ling Ban

Papers

4G/5G Multiple Antennas for Future Multi-Mode Smartphone Applications

Eight-Port Orthogonally Dual-Polarized Antenna Array for 5G Smartphone Applications

8-antenna and 16-antenna arrays using the quad-antenna linear array as a building block for the 3.5-GHz LTE MIMO operation in the smartphone

Tri-Polarized 12-Antenna MIMO Array for Future 5G Smartphone Applications

Wireless terminal antenna