Yong Mo Moon

Bio: Yong Mo Moon is an academic researcher from Worcester Polytechnic Institute. The author has contributed to research in topics: Compliant mechanism & Block (programming). The author has an hindex of 6, co-authored 7 publications receiving 655 citations. Previous affiliations of Yong Mo Moon include University of Michigan.

Design of large-displacement compliant joints

Abstract: Flexure joints are widely used to approximate the function of traditional mechanical joints, while offering the benefits of high precision, long life, and ease of manufacture. This paper investigates and catalogs the drawbacks of typical flexure connectors and presents several new designs for highly-effective, kinematically-behaved compliant joints. A revolute and a translational compliant joint are proposed (Figure 1), both of which offer great improvements over existing flexures in the qualities of (1) large range of motion, (2) minimal axis drift, (3) increased off-axis stiffness, and (4) reduced stress-concentrations. Analytic stiffness equations are developed for each joint and parametric computer models are used to verify their superior stiffness properties. A catalog of design charts based on the parametric models is also presented, allowing for rapid sizing of the joints for custom performance. Finally, two multi-degree-of-freedom joints are proposed as modifications to the revolute joint. These include a compliant universal joint and a compliant spherical joint, both designed to provide high degrees of compliance in the desired direction of motion and high stiffness in other directions.Copyright © 2002 by ASME

A Building Block Approach to the Conceptual Synthesis of Compliant Mechanisms Utilizing Compliance and Stiffness Ellipsoids

Abstract: Ellipsoids this paper, we investigate a methodology for the conceptual synthesis of compliant mechanisms based on a building block approach. The building block approach is intuitive and provides key insight into how individual building blocks contribute to the overall function. We investigate the basic kinematic behavior of individual building blocks and relate this to the behavior of a design composed of building blocks. This serves to not only generate viable solutions but also to augment the understanding of the designer. Once a feasible concept is thus generated, known methods for size and geometry optimization may be employed to fine-tune performance. The key enabler of the building block synthesis is the method of capturing kinematic behavior using compliance ellipsoids. The mathematical model of the compliance ellipsoids facilitates the characterization of the building blocks, transformation of problem specifications, decomposition into subproblems, and the ability to search for alternate solutions. The compliance ellipsoids also give insight into how individual building blocks contribute to the overall kinematic function. The effectiveness and generality of the methodology are demonstrated through two synthesis examples. Using only a limited set of building blocks, the methodology is capable of addressing generic kinematic problem specifications for compliance at a single point and for a single-input, single-output compliant mechanism. A rapid prototype of the latter demonstrates the validity of the conceptual solution. DOI: 10.1115/1.2821387

Design of Reconfigurable Machine Tools

Abstract: In this paper, we present a systematic methodology for designing Reconfigurable Machine Tools (RMTs). The synthesis methodology takes as input a set of functional requirements-a set of process plans and generates a set of kinematically viable reconfigurable machine tools that meet the given design specifications. We present a mathematical framework for synthesis of machine tools using a library of building blocks. The framework is rooted in (a) graph theoretic methods of enumeration of alternate structural configurations and (b) screw theory that enables us to manipulate matrix representations of motions to identify appropriate kinematic building blocks.

Generalized kinematic modeling of Reconfigurable Machine Tools

Abstract: To accommodate frequent changes in product design and to be able to process a family of products in a timely and cost-effective manner the next generation of machine tools should be reconfigurable. Reconfigurability enables reduction not only in machine design lead time but more significantly a reduction in machine set-up and ramp-up time. The essential characteristics of Reconfigurable Machine Tools (RMTs) include modularity, convertibility, flexibility, and cost-effectiveness. This paper presents a mathematical representation scheme using screw theory that lays the foundation for systematic design of reconfigurable machine tools. The motion characteristics of a set of desired machining tasks as well as stored library of machine modules are captured in a common representation scheme. A simple design example to illustrate the application of this methodology for systematic selection and synthesis of reconfigurable machine tools is presented.

An Instant Center Approach Toward the Conceptual Design of Compliant Mechanisms

Abstract: The conceptual design of compliant mechanisms is generally performed using one of two methods: topology optimization or the Pseudo-Rigid-Body Model. In this paper, we present a conceptual design methodology which utilizes a building block approach. The concept of the instant center is developed for compliant mechanisms and is used to characterize the building blocks. The building block characterization is used in guiding the problem decomposition. The compliant four-bar building block is presented as a base mechanism for the conceptual design. The geometric advantage is used as a quantitative measure to guide the designer in determining the shape of the building block. An example problem demonstrates the methodology’s capacity to obtain viable conceptual designs in a straightforward manner. Resulting mechanisms satisfy initial kinematic requirements and are ready for further refinement using size and geometry optimization.Copyright © 2004 by ASME

Soft Actuators for Small-Scale Robotics.

Abstract: This review comprises a detailed survey of ongoing methodologies for soft actuators, highlighting approaches suitable for nanometer- to centimeter-scale robotic applications. Soft robots present a special design challenge in that their actuation and sensing mechanisms are often highly integrated with the robot body and overall functionality. When less than a centimeter, they belong to an even more special subcategory of robots or devices, in that they often lack on-board power, sensing, computation, and control. Soft, active materials are particularly well suited for this task, with a wide range of stimulants and a number of impressive examples, demonstrating large deformations, high motion complexities, and varied multifunctionality. Recent research includes both the development of new materials and composites, as well as novel implementations leveraging the unique properties of soft materials.

The First Takeoff of a Biologically Inspired At-Scale Robotic Insect

Abstract: Biology is a useful tool when applied to engineering challenges that have been solved in nature. Here, the emulous goal of creating an insect-sized, truly micro air vehicle is addressed by first exploring biological principles. These principles give insights on how to generate sufficient thrust to sustain flight for centimeter-scale vehicles. Here, it is shown how novel manufacturing paradigms enable the creation of the mechanical and aeromechanical subsystems of a microrobotic device that is capable of Diptera-like wing trajectories. The results are a unique microrobot: a 60 mg robotic insect that can produce sufficient thrust to accelerate vertically. Although still externally powered, this micromechanical device represents significant progress toward the creation of autonomous insect-sized micro air vehicles.

A method for building self-folding machines

Abstract: Origami can turn a sheet of paper into complex three-dimensional shapes, and similar folding techniques can produce structures and mechanisms. To demonstrate the application of these techniques to the fabrication of machines, we developed a crawling robot that folds itself. The robot starts as a flat sheet with embedded electronics, and transforms autonomously into a functional machine. To accomplish this, we developed shape-memory composites that fold themselves along embedded hinges. We used these composites to recreate fundamental folded patterns, derived from computational origami, that can be extrapolated to a wide range of geometries and mechanisms. This origami-inspired robot can fold itself in 4 minutes and walk away without human intervention, demonstrating the potential both for complex self-folding machines and autonomous, self-controlled assembly.

Product Variety Management

Abstract: A great challenge facing industry today is managing variety throughout the entire products life cycle. Drivers of products variety, its benefits, pre-requisites and associated complexity and cost are presented. Enhancing consumers’ value through variety and approaches for achieving it efficiently including modularity, commonality and differentiation are discussed. Variant-oriented manufacturing systems paradigms, as enablers of product variety, and the effective co-development of variants and their manufacturing systems to ensure economic sustainability are reviewed. Industrial applications and guidelines to achieve economy of scope with advantages of economy of scale are discussed. Perspectives and insights on future research in this field are offered.