Yongjiu Dai

Bio: Yongjiu Dai is an academic researcher from Sun Yat-sen University. The author has contributed to research in topics: Snow & Environmental science. The author has an hindex of 47, co-authored 129 publications receiving 9537 citations. Previous affiliations of Yongjiu Dai include Georgia Institute of Technology & Academia Sinica.

The Common Land Model

Abstract: The Common Land Model (CLM) was developed for community use by a grassroots collaboration of scientists who have an interest in making a general land model available for public use and further development. The major model characteristics include enough unevenly spaced layers to adequately represent soil temperature and soil moisture, and a multilayer parameterization of snow processes; an explicit treatment of the mass of liquid water and ice water and their phase change within the snow and soil system; a runoff parameterization following the TOPMODEL concept; a canopy photo synthesis-conductance model that describes the simultaneous transfer of CO2 and water vapor into and out of vegetation; and a tiled treatment of the subgrid fraction of energy and water balance. CLM has been extensively evaluated in offline mode and coupling runs with the NCAR Community Climate Model (CCM3). The results of two offline runs, presented as examples, are compared with observations and with the simulation of three other la...

The land surface climatology of the community land model coupled to the NCAR community climate model

Abstract: The land surface parameterization used with the community climate model (CCM3) and the climate system model (CSM1), the National Center for Atmospheric Research land surface model (NCAR LSM1), has been modified as part of the development of the next version of these climate models. This new model is known as the community land model (CLM2). In CLM2, the surface is represented by five primary subgrid land cover types (glacier, lake, wetland, urban, vegetated) in each grid cell. The vegetated portion of a grid cell is further divided into patches of up to 4 of 16 plant functional types, each with its own leaf and stem area index and canopy height. The relative area of each subgrid unit, the plant functional type, and leaf area index are obtained from 1-km satellite data. The soil texture dataset allows vertical profiles of sand and clay. Most of the physical parameterizations in the model were also updated. Major model differences include: 10 layers for soil temperature and soil water with explicit treatment of liquid water and ice; a multilayer snowpack; runoff based on the TOPMODEL concept; new formulation of ground and vegetation fluxes; and vertical root profiles from a global synthesis of ecological studies. Simulations with CCM3 show significant improvements in surface air temperature, snow cover, and runoff for CLM2 compared to LSM1. CLM2 generally warms surface air temperature in all seasons compared to LSM1, reducing or eliminating many cold biases. Annual precipitation over land is reduced from 2.35 mm day21 in LSM1 to 2.14 mm day21 in CLM2. The hydrologic cycle is also different. Transpiration and ground evaporation are reduced. Leaves and stems evaporate more intercepted water annually in CLM2 than LSM1. Global runoff from land increases from 0.75 mm day21 in LSM1 to 0.84 mm day21 in CLM2. The annual cycle of runoff is greatly improved in CLM2, especially in arctic and boreal regions where the model has low runoff in cold seasons when the soil is frozen and high runoff during the snowmelt season. Most of the differences between CLM2 and LSM1 are attributed to particular parameterizations rather than to different surface datasets. Important processes include: multilayer snow, frozen water, interception, soil water limitation to latent heat, and higher aerodynamic resistances to heat exchange from ground.

A Two-Big-Leaf Model for Canopy Temperature, Photosynthesis, and Stomatal Conductance

Abstract: The energy exchange, evapotranspiration, and carbon exchange by plant canopies depend on leaf stomatal control. The treatment of this control has been required by land components of climate and carbon models. Physiological models can be used to simulate the responses of stomatal conductance to changes in atmospheric and soil environments. Big-leaf models that treat a canopy as a single leaf tend to overestimate fluxes of CO 2 and water vapor. Models that differentiate between sunlit and shaded leaves largely overcome these problems. A one-layered, two-big-leaf submodel for photosynthesis, stomatal conductance, leaf temperature, and energy fluxes is presented in this paper. It includes 1) an improved two stream approximation model of radiation transfer of the canopy, with attention to singularities in its solution and with separate integrations of radiation absorption by sunlit and shaded fractions of canopy; 2) a photosynthesis‐stomatal conductance model for sunlit and shaded leaves separately, and for the simultaneous transfers of CO 2 and water vapor into and out of the leaf—leaf physiological properties (i.e., leaf nitrogen concentration, maximum potential electron transport rate, and hence photosynthetic capacity) vary throughout the plant canopy in response to the radiation‐weight time-mean profile of photosynthetically active radiation (PAR), and the soil water limitation is applied to both maximum rates of leaf carbon uptake by Rubisco and electron transport, and the model scales up from leaf to canopy separately for all sunlit and shaded leaves; 3) a well-built quasi-Newton‐Raphson method for simultaneous solution of temperatures of the sunlit and shaded leaves. The model was incorporated into the Common Land Model (CLM) and is denoted CLM 2L. It was driven with observational atmospheric forcing from two forest sites [Anglo-Brazilian Amazonian Climate Observation Study (ABRACOS) and Boreal Ecosystem‐Atmosphere Study (BOREAS)] for 2 yr of simulation. The simulated fluxes by CLM 2L were compared with the observations, and with the results by the CLM with a single bigleaf scheme (CLM 1L) and by the CLM with the assimilation‐stomatal conductance scheme of NCAR Land Surface Model (LSM). The results showed that CLM 2L was an improvement compared to the CLM 1L and the CLM for the test cases of tropical evergreen broadleaf land cover and coniferous boreal forest.

A global soil data set for earth system modeling

Abstract: We developed a comprehensive, gridded Global Soil Dataset for use in Earth System Models (GSDE) and other applications. The GSDE provides soil information, such as soil particle-size distribution, organic carbon, and nutrients, and quality control information in terms of confidence level at 30″ × 30″ horizontal resolution and for eight vertical layers to a depth of 2.3 m. The GSDE is based on the Soil Map of the World and various regional and national soil databases, including soil attribute data and soil maps. We used a standardized data structure and data processing procedures to harmonize the data collected from various sources. We then used a soil type linkage method (i.e., taxotransfer rules) and a polygon linkage method to derive the spatial distribution of the soil properties. To aggregate the attributes of different compositions of a mapping unit, we used three mapping approaches: the area-weighting method, the dominant soil type method, and the dominant binned soil attribute method. The data set can also be aggregated to a lower resolution. In this paper, we only show the vertical and horizontal variations of sand, silt and clay contents, bulk density, and soil organic carbon as examples of the GSDE. The GSDE estimates of global soil organic carbon stock to the depths of 2.3, 1, and 0.3 m are 1922.7, 1455.4, and 720.1 Gt, respectively. This newly developed data set provides more accurate soil information and represents a step forward to advance earth system modeling.

Coupling an Advanced Land Surface–Hydrology Model with the Penn State–NCAR MM5 Modeling System. Part I: Model Implementation and Sensitivity

Abstract: This paper addresses and documents a number of issues related to the implementation of an advanced land surface–hydrology model in the Penn State–NCAR fifth-generation Mesoscale Model (MM5). The concept adopted here is that the land surface model should be able to provide not only reasonable diurnal variations of surface heat fluxes as surface boundary conditions for coupled models, but also correct seasonal evolutions of soil moisture in the context of a long-term data assimilation system. In a similar way to that in which the modified Oregon State University land surface model (LSM) has been used in the NCEP global and regional forecast models, it is implemented in MM5 to facilitate the initialization of soil moisture. Also, 1-km resolution vegetation and soil texture maps are introduced in the coupled MM5–LSM system to help identify vegetation/water/soil characteristics at fine scales and capture the feedback of these land surface forcings. A monthly varying climatological 0.15° × 0.15° green ...

Climate Change 2007: The Physical Science Basis.

Abstract: Cause, conseguenze e strategie di mitigazione Proponiamo il primo di una serie di articoli in cui affronteremo l’attuale problema dei mutamenti climatici. Presentiamo il documento redatto, votato e pubblicato dall’Ipcc - Comitato intergovernativo sui cambiamenti climatici - che illustra la sintesi delle ricerche svolte su questo tema rilevante.

Climate Change 2007: Impacts, Adaptation and Vulnerability.

Abstract: Impatti, adattamento e vulnerabilita Le cause e le responsabilita dei cambiamenti climatici sono state trattate sul numero di ottobre della rivista Cda. Approfondiamo l’argomento presentando il documento: “Cambiamenti climatici 2007: impatti, adattamento e vulnerabilita” votato ad aprile 2007 dal secondo gruppo di lavoro del Comitato Intergovernativo sui Cambiamenti Climatici (Intergovernmental Panel on Climate Change). Si tratta del secondo di tre documenti che compongono il quarto rapporto sui cambiamenti climatici.

The Global Land Data Assimilation System

Abstract: A Global Land Data Assimilation System (GLDAS) has been developed. Its purpose is to ingest satellite- and ground-based observational data products, using advanced land surface modeling and data assimilation techniques, in order to generate optimal fields of land surface states and fluxes. GLDAS is unique in that it is an uncoupled land surface modeling system that drives multiple models, integrates a huge quantity of observation-based data, runs globally at high resolution (0.25°), and produces results in near–real time (typically within 48 h of the present). GLDAS is also a test bed for innovative modeling and assimilation capabilities. A vegetation-based “tiling” approach is used to simulate subgrid-scale variability, with a 1-km global vegetation dataset as its basis. Soil and elevation parameters are based on high-resolution global datasets. Observation-based precipitation and downward radiation and output fields from the best available global coupled atmospheric data assimilation systems are employe...