Seismic behaviour of tunnels: From experiments to analysis

Over the past few years, accompanied by big and frequent earthquakes, more attention was paid to the tunnel earthquake resistance. To reduce tunnel seismic damage and explore the reasonable aseismic measures, the tunnel earthquake disaster investigation was employed to analyze and summarize the tunnel seismic damage on the basis of Wenchuan earthquake. Fifty-two tunnels near the epicenter of Sichuan Province were investigated: Only 7 tunnels did not show structure damage, 6 tunnels suffered the most serious damage, and the rest appeared damage to various extents. It indicates that most serious seismic damage happens to fault fracture zone, followed by entrance and common section of the tunnel. Additionally, the results display that the typical seismic damage of tunnels is lining cracking, collapsing, dislocation, construction joints cracking, and uplifting of invert, and usually lining cracking and collapsing account for a larger proportion. Therefore, the tunnel aseismic design should emphasize the fault fracture zone and tunnel entrance. Tunnel design should adopt the composite lining structure with shock absorber and whole chain alternative grouting to prevent the lining cracking and collapsing in the seismic fortification zone.

Characteristics of seismic disasters and aseismic measures of tunnels in Wenchuan earthquake

To cope with tunnel frost damage, studies on prevention methods are routinely conducted to improve environmental protection and energy saving. Based on field investigations, the main available thermal insulation methods and their application are discussed and analysed in this paper. The results show that passive measures, such as a thermal insulation layer or door, cannot completely avoid frost damage. Construction investment of the electric heat tracing (EHT) system is lower at the early stage, but a large investment in operation and pollution problems are needed in the later period. As renewable, clean and environmentally friendly primary energy, geothermal energy can realize energy-saving and emission-reduction. Furthermore, our research team proposed the optimization design method for tunnel heat insulation and anti-freezing by using geothermal energy and presented the challenges for future applications of the ground-source heat pump (GSHP) system in tunnels. The results regarding energy conservation from this review can provide useful technical support in design, operation and management of tunnels in cold regions.

A state-of-the-art review of sustainable energy based freeze proof technology for cold-region tunnels in China

Statistical analysis of fire accidents in Chinese highway tunnels 2000–2016

Over the past couple of decades, as a new mathematical tool for addressing a number of tough problems, fractional calculus has been gaining a continually increasing interest in diverse scientific fields, including geotechnical engineering due primarily to geotechnical rheology phenomenon. Unlike the classical constitutive models in which simulation analysis gradually fails to meet the reasonable accuracy of requirement, the fractional derivative models have shown the merits of hereditary phenomena with long memory. Additionally, it is traced that the fractional derivative model is one of the most effective and accurate approaches to describe the rheology phenomenon. In relation to this, an overview aimed first at model structure and parameter determination in combination with application cases based on fractional calculus was provided. Furthermore, this review paper shed light on the practical application aspects of deformation analysis of circular tunnel, rheological settlement of subgrade, and relevant loess researches subjected to the achievements acquired in geotechnical engineering. Finally, concluding remarks and important future investigation directions were pointed out.

/pdf/investigation-progresses-and-applications-of-fractional-2xu6r3zfhv.pdf

Investigation Progresses and Applications of Fractional Derivative Model in Geotechnical Engineering

Freeze-proof method and test verification of a cold region tunnel employing electric heat tracing

Challenges and strategies involved in designing and constructing a 6 km immersed tunnel: A case study of the Hong Kong–Zhuhai–Macao Bridge

A great concern for the safety of large cross-section tunnels, which are being or to be built in the loess strata of China, is attracted. Generally, loess is a multi-phase porous medium and develops complex stress and strain variation while executing a tunnel project. Another problem is that the soil surrounding both tunnel arches is subjected to a complex loading due to the double excavation. To obtain an in-depth knowledge of the mechanism of tunnel deformation induced by the twin-tunnelling, we conducted comprehensive centrifuge tests, which can simulate and reproduce strictly the action process of twin-tunnelling. Through the model tests, the response of twin-tunnelling on loess stratum deformation was obtained. The investigations showed that with the increase of tunnel spacing, the stratum deformation distribution near the vault changes from a single-peak V shape to a double-peak W shape. Additionally, the height of the stratum pressure arch effect increases significantly. The settlement of the preceding tunnel is slightly larger than that of the latter tunnel, and the twin-tunnelling effect gradually decreases with the increase of tunnel spacing. Through comparative analysis of the different combinations of tunnel spacing and tunnel interval, the interaction between two tunnels with different spacing and interval during tunnelling was investigated, further optimizing the reasonable tunnel spacing and construction steps, as well as providing reference for tunnel route selection in the loess strata.

Yongli Xie

Papers

A state-of-the-art review of sustainable energy based freeze proof technology for cold-region tunnels in China

Freeze-proof method and test verification of a cold region tunnel employing electric heat tracing

Challenges and strategies involved in designing and constructing a 6 km immersed tunnel: A case study of the Hong Kong–Zhuhai–Macao Bridge

Centrifuge modelling of twin-tunnelling induced ground movements in loess strata

Experimental research on temperature field and structure performance under different lining water contents in road tunnel fire